REPSOL ALCUDIA 3802N black compound is a high density polyethylene hexene copolymer of high molecular weight mainly designed for the extrusion of microirrigations tapes. The combination of the antioxidant system and minimum of 2.0 % well dispersed carbon black used in REPSOL ALCUDIA 3802N provides an excellent protection against thermal oxidation during processing and good long-term thermal stability and UV resistance. Because other good mechanical properties and their characteristics, and an excellent ESCR resistance the polyethylene black compound REPSOL ALCUDIA 3802N, is designed to produce: Applications - Black microirrigation tapes. - Fittings and valves. The recommended melt temperature to obtain the optimum results is 215ºC - 220ºC, together with the use of a screw L/D: 20 and compression rate: 4:1.

REPSOL ALCUDIA 45060 is a high density polyethylene copolymer hexane, of high molecular weight. It is specially designed for the extrusion-blow moulding of automotive plastic fuel tanks. REPSOL ALCUDIA 45060 displays excellent environmental stress cracking resistance (ESCR) and high impact resistance. REPSOL ALCUDIA 45060 is supplied in pellets and contains a suitable antioxidant formulation to prevent thermal degradation in the extrusion process. Applications - Automotive plastic fuel tanks. Recommended melt temperature range from 180 to 210ºC. Processing conditions should be optimized for each production line.

ALCUDIA® 45060UV is a high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by blow molding, containers of medium and high capacity for oils and dangerous goods. This grade contains stabilisers according to the end-use of the item in order to reinforce the thermal and light stability. It has an excellent Environmental Stress Cracking Resistance (ESCR) and impact resistance, so it's recommended to IBC tanks. TYPICAL APPLICATIONS - IBC tanks - High capacity containers - Automotive fuel tanks Recommended melt temperature range from 180 to 210°C. Processing conditions should be optimised for each production line.

REPSOL ALCUDIA 49070 is a high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by extrusion-blow moulding, containers of medium and high capacity (up to 5000 litres), for petroleum derivatives and others. This grade contains stabilizers according to the end-use of the item in order to reinforce the thermal stability but doesn’t contain UV additives. It has an excellent environmental stress cracking resistance (ESCR) and impact resistance. This grade is suitable to produce containers according to the Spanish UNE-53432 parts 1, 2 and 3 and the EN 13341 in Europe, or NFM-88-560 in France. It is also included in the German DIBT list of materials to contain petroleum derivatives. Applications - High-capacity containers for petroleum derivatives (IBC, Fuel for heating, water, etc.) - Sheet extrusion Recommended melt temperature ranges from 190 to 215ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 49070UV is a high-density polyethylene copolymer of hexene with a high molecular weight. It is specifically engineered for the production of medium and high capacity containers (up to 5000 litres) through extrusion-blow molding, intended for petroleum derivatives and other similar uses. This grade includes stabilizers tailored to the end-use application to enhance thermal and light stability. Additionally, it boasts excellent environmental stress cracking resistance (ESCR) and impact resistance. This grade meets the requirements for producing containers according to Spanish UNE-53432 parts 1, 2, and 3, EN 13341 in Europe, and NFM-88-560 in France. It is also listed in the German DIBT list of materials for containing petroleum derivatives. TYPICAL APPLICATIONS - High-capacity containers for petroleum derivatives (IBC, Fuel for heating, water, etc.). - Sheet extrusion Recommended melt temperature range from 190 to 215ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 49090S is a bimodal high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by blow molding, containers of medium and high capacity (up to 5000 litres), for petroleum derivatives. This grade does not contain stabilizers according to the end-use of the item in order to reinforce light stability. It has an excellent environmental stress cracking resistance (ESCR) and impact resistance. This grade is suitable to produce containers according to the Spanish UNE-53432 parts 1, 2 and 3 and the EN 13341 in Europe, or NFM-88-560 in France. It is also included in the German DIBT list of materials to contain petroleum derivatives. APPLICATIONS - IBC tanks and high capacity containers. Recommended melt temperature range from 190 to 215ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 49090UVS is a bimodal high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by blow molding, containers of medium and high capacity (up to 5000 litres), for petroleum derivatives. This grade contains stabilizers according to the end-use of the item in order to reinforce the thermal and light stability. It has an excellent environmental stress cracking resistance (ESCR) and impact resistance. This grade is suitable to produce containers according to the Spanish UNE-53432 parts 1, 2 and 3 and the EN 13341 in Europe, or NFM-88-560 in France. It is also included in the German DIBT list of materials to contain petroleum derivatives. APPLICATIONS - IBC tanks and high capacity containers. Recommended melt temperature range from 190 to 215ºC. Processing conditions should be optimized for each production line.

ALCUDIA® 51100 is a high density polyethylene with a broad bimodal molecular weight distribution designed for the extrusion of pipes. It also can be used as base polymer for identification stripes compound. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. This grade is characterized by its very good mechanical properties, excellent cracking resistance and good resistance to internal pressure. Applications - Pipes general purposes. - Base polymer for identification stripes compound. Recommended melt temperature range 200-220ºC. Processing conditions should be optimised for each production line.

REPSOL ALCUDIA 51100BS blue compound is a high density polyethylene, dark blue coloured similar to RAL 5005, with a broad bimodal molecular weight distribution for identification stripes for drinking water pipes made from black PE100 grades REPSOL ALCUDIA T100N and REPSOL ALCUDIA T100NLS. It provides an excellent protection against thermal oxidation during processing and good long-term thermal stability and UV resistance. Applications - Identification marking stripes for PE100 drinking water pipes.

REPSOL ALCUDIA 51100YS yellow compound is a high density polyethylene with a broad bimodal molecular weight distribution. It is a cadmium-free yellow stripe compound to be used in combination with the black PE100 grade REPSOL ALCUDIA T100NLS. It provides an excellent protection against thermal oxidation during processing and good long-term thermal stability and UV resistance. Applications - Identification marking stripes for PE100 gas water pipes.

REPSOL ALCUDIA 5203 is a high-density polyethylene copolymer of hexene with a medium molecular weight. It is specifically formulated for the extrusion-blow molding of containers intended for liquid detergents and chemicals. This grade includes stabilizers tailored to the final application, enhancing its thermal stability. Due to its molecular weight and density, REPSOL ALCUDIA 5203 exhibits excellent mechanical properties, as well as a high level of stiffness and environmental stress cracking resistance. Applications - Blow-molded bottles for liquid detergents and chemicals. Recommended melt temperature range from 180 to 200ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 5503 is a medium molecular weight, high-density polyethylene copolymer of hexene. It is specifically formulated for blow molding-extrusion applications to manufacture containers for liquid detergents and chemicals. This grade includes stabilizers tailored to the end use of the product to enhance thermal stability. Due to its molecular weight and density, REPSOL ALCUDIA 5503 provides excellent mechanical properties, demonstrating both high stiffness and resistance to environmental stress cracking. Applications - Packaging of liquid detergents and chemicals. Recommended melt temperature range from 180 to 200ºC. Processing conditions should be optimized for each production line.

Repsol ALCUDIA 55050 is a high-density polyethylene copolymer of hexene, specifically designed for medium and high-capacity tanks produced through extrusion-blow molding. It is also suitable for thermoforming sheets. This grade incorporates a package of additives that includes the necessary antioxidants to protect against thermal degradation. It offers excellent resistance to environmental stress cracking (ESCR), high impact strength, and chemical resistance. TYPICAL APPLICATIONS - Medium and high-capacity containers and jerrican. - Sheet extrusion. Recommended melt temperature range from 180 to 210ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 5605N is a bimodal high density polyethylene black compound designed to provide very low shrinkage during processing. It contains well dispersed carbon black and antioxidant in order to ensure UV radiation resistance and thermal ageing respectively. The outstanding feature of this product is its mechanical properties, excellent outdoor weather resistance and very good processability. Applications • Black Jacketing of power and telecommunication cables. It is recommended a melt temperature between 190 – 220ºC and the use of a screw L/D: 20 – 28. REPSOL ALCUDIA 5605-N meets the following specifications: ISO 1872 PE KHC 40/45 D003/006; ASTM D 1248 III, C4, Grade J5; VDE 0207 Teil3 2YM1.

The high density polyethylene ALCUDIA® 5606T is a homopolymer of medium molecular weight. Due to its good processability characteristics is specially intended for extrusion of doubled corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. TYPICAL APPLICATIONS - Structured doubled wall without pressure pipes for underground drainage and sewage. - Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 - 210 °C. Processing conditions should be optimised for each production line.

The high density polyethylene ALCUDIA® 5703A is a homopolymer of medium molecular weight specially intended for extrusion of mono and doubled wall corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. The ALCUDIA® 5703A has an excellent balance between rigidity and others properties as the impact strength. TYPICAL APPLICATIONS - Structured doubled wall without pressure pipes for underground drainage and sewage. - Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 - 210°C. Processing conditions should be optimised for each production line.

REPSOL ALCUDIA 5703L is a high-density polyethylene polymer with medium molecular weight. It is specially designed for aseptic filled bottles of milk produced by extrusion-blow molding. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. This grade presents an excellent relationship between the different properties required for its application, such as rigidity, impact resistance and organoleptic properties. Applications - Aseptic filled milk bottles and other liquid dairy products. Recommended melt temperature range from 165 to 210ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 5803 is a bimodal high-density polyethylene with middle molecular weight. It is specially designed to make containers for liquid detergents and chemicals by extrusion-blow molding. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good mechanical properties and good level of both stiffness and environmental stress cracking resistance can be obtained with ALCUDIA® 5803 due to its molecular weight and density. TYPICAL APPLICATIONS - Packaging of liquid detergents and cleaners. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 5903S is a bimodal high-density polyethylene with middle molecular weight. It is specially designed to manufacture, by blow extrusion-molding, containers for liquid detergents and chemicals. This grade contains stabilizers according to its end use, to reinforce its thermal stability, with optimal organoleptic performance and food contact safety. With an outstanding balance of stiffness and environmental stress cracking resistance (ESCR), it is well suited for packaging of soaps, detergents, bleach, cleaners, shampoos, and other products with a high ESCR demand. TYPICAL APPLICATIONS - Packaging of liquid detergents and cleaners. - Packaging of milk, dairy products, liquid juice as well as a large range of liquids. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 6006L is a high density polyethylene copolymer of hexene with medium molecular weight. It is specially designed to make, by extrusion-blow moulding, milk bottles. This grade contains a package of additives that includes the antioxidant necessary to reinforce the thermal stability. It has excellent performance in extrusion and tower sterilization. Its characteristics give it, on the one hand, a high rate of extrusion and, on the other, an excellent rigidity that gives the containers a very good resistance to deformation due to stacking loads during storage. TYPICAL APPLICATIONS - Bottles (mono and multi-layer) for dairy products and food. Recommended melt temperature range from 170 to 190ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 6020LS is a bimodal high-density polyethylene with middle molecular weight. It is specially designed to make, by injection molding, caps and closures for water and carbonated soft drinks. This grade contains stabilizers according to its end use, it reinforce its thermal stability, with optimal organoleptic performance and food contact safety. This grade presents an excellent relationship between the different properties required for its application, such as rigidity, impact resistance, environmental stress cracking resistance and organoleptic properties. Applications - Caps and Closures (water and carbonated soft drinks) - General application for injection molding Recommended melt temperature range from 200 to 240°C. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 6206LS is a bimodal high-density polyethylene copolymer butene with medium molecular weight. It is specially designed to make, by blow moulding milk bottles. This grade contains a package of additives that includes the antioxidant necessary to reinforce the thermal stability. It has excellent performance in extrusion and tower sterilization. Its characteristics give it, on the one hand, a high rate of extrusion and, on the other, an excellent rigidity that gives the containers a very good resistance to deformation due to stacking loads during storage. Applications - Bottles (mono and multi-layer) for dairy products and food. - Packaging of liquid detergents and chemicals. Recommended melt temperature range from 170 to 190ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA 7015S is a bimodal high-density polyethylene with middle molecular weight. It is specially designed to make, by injection molding, caps and closures. This grade contains stabilizers according to its end use, to reinforce its thermal stability, with optimal organoleptic performance and food contact safety. This grade presents an excellent relationship between the different properties required for its application, such as rigidity, impact resistance, environmental stress cracking resistance and organoleptic properties.

ALCUDIA® C220N is a high molecular weight, high density polyethylene compound designed to provide very low shrinkage during processing. It contains well dispersed carbon black and antioxidant in order to ensure UV radiation resistance and thermal ageing respectively. The outstanding feature of this product is its mechanical properties, excellent outdoor weather resistance and very good processability Applications - Black jacketing of power and telecommunication cables. It is recommended a melt temperature between 190 - 220°C and the use of a screw L/D: 20 - 28. ALCUDIA® C220N meets the following specifications: ISO 1872 PE KHC 40/45 D003/006; ASTM D 1248 III, C4, Grade J5; VDE 0207 Teil3 2YM1.

ALCUDIA® C240UV is a natural high molecular weight and high density polyethylene that gives to the compound the following features: excellent processability; high abrasion resistance; good mechanical properties; excellent environmental stress cracking resistance (ESCR) and superior compatibility with pigments. It contains an antioxidant system which warranties protection against thermal oxidation during processing and long term stability. Applications - Colour Jacketing for power and telecommunication cables. It is recommended an extrusion melt temperature of 220°C and a temperature profile between 190 - 235°C. Optimal processing conditions must be tuned for each production line. ALCUDIA® C-240-UV meets the following specifications: ISO 1872 PE KHN 40D001/003; ASTM D 1248 II, A5, J5; UNESA 3305C.

REPSOL ALCUDIA CAB4805UV is a bimodal high density polyethylene natural product designed to provide very low shrinkage during processing. It contains antioxidants in order to ensure UV radiation resistance and thermal ageing. The outstanding feature of this product is its mechanical properties, low contraction in the final application, excellent outdoor weather resistance and very good processability. Applications - Jacketing of power and telecommunication cables. It is recommended a melt temperature between 190 – 220ºC and the use of a screw L/D: 20 – 28.

REPSOL ALCUDIA CAB4910 is a high density polyethylene, designed for cable applications, with excellent mechanical properties and a suitable environmental stress cracking resistance. The material exhibits very good performance in high speed lines. It contains stabilizers against degradation due to harsh processing conditions as well as to guarantee a proper thermal protection over the cable lifetime. Applications - Solid insulation of telephone single. - Jelly-filled telephone cable. - Sheathing for energy and fiber optic cables. REPSOL ALCUDIA CAB4910 can be extruded in a wide range of processing conditions. We recommend melt temperatures between 240ºC - 270ºC. The optimal conditions depend on the application and the extrusion equipment used.

REPSOL ALCUDIA M5206 is a low melt flow rate high density polyethylene with narrow molecular weight distribution. It offers good processing properties for production of monofilaments with very high tensile strength at break. Applications REPSOL ALCUDIA M5206 gives very high tenacity monofilaments designed for top products of technical applications: - Fishing nets - Ropes Recommended melt temperature range from 210-240ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA M5309 is a medium melt flow rate high density polyethylene with medium molecular weight distribution. It offers optimum processing properties for production of monofilaments with good tensile strength at break. Applications REPSOL ALCUDIA M5309 gives flexible monofilaments with very low fibrillation tendency suitable for textile applications: - Nets - Webs Recommended melt temperature range from 210-230ºC. Processing conditions should be optimized for each production line.

RESPOL ALCUDIA R4805D1 is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of tapes with high tensile strength at break. This product is specially formulated with a slip package. Applications RESPOL ALCUDIA R4805D1 is designed for stretched tapes production based on blown film. It gives flexible tapes with high tenacity and low fibrillation tendency suitable for high-speed textile lines: - Iso Mayer textile applications - Raschel knitted and woven fabrics. - Twines and ropes Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

REPSOL ALCUDIA R4805EP is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of tapes with high tensile strength at break. This product is specially formulated with a slip package. Applications REPSOL ALCUDIA R4805EP is designed for stretched tapes production based on blown film. It gives flexible tapes with high tenacity and low fibrillation tendency suitable for high speed textil lines: - Iso Mayer textile applications - Raschel knitted and woven fabrics. - Twines and ropes Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

REPSOL ALCUDIA R4806HT is a low melt flow rate high density polyethylene with a narrow molecular weight distribution. This grade is designed to offer an optimum processability in a wide processing window. Its molecular structure allows to achieve the maximum mechanical properties for production of tapes with high tensile strength at break. Applications REPSOL ALCUDIA R4806HT is designed for stretched tapes production based on blown film. It gives flexible tapes with very high tenacity and low fibrillation tendency suitable for: - Iso Mayer textile applications - Raschel knitted and woven fabrics. - Twines and ropes Recommended melt temperature range from 210-230ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA T100NLS black compound is a high density polyethylene with a broad bimodal molecular weight distribution designed for the extrusion of large diameter pressure pipes. It complies with the requirements of EN 12201 and EN 1555, with a MRS 10MPa - PE100 classification. The combination of the antioxidant system and minimum of 2.0 % well dispersed carbon black used in REPSOL ALCUDIA T100NLS provides an excellent protection against thermal oxidation during processing and good long-term thermal stability and UV resistance. Applications - Large diameter and thickness pressure pipes for gas, industrial and drinking water transport and distribution. - Large diameter pipes without pressure. Recommended melt temperature range from 220-250ºC. Processing conditions should be optimized for each production line.

REPSOL ALCUDIA T80N black compound is a high density polyethylene with a broad bimodal molecular weight distribution designed for the extrusion of pressure pipes. It complies with the requirements of EN 12201, with a MRS 8MPa - PE80 classification. The combination of the antioxidant system and minimum of 2.0 % well dispersed carbon black used in REPSOL ALCUDIA T80N provides an excellent protection against thermal oxidation during processing and good long-term thermal stability and UV resistance. Because other good mechanical properties and their characteristics, and an excellent ESCR resistance the polyethylene black compound REPSOL ALCUDIA T80N, is designed to produce: Applications - Gas, industrial and drinking water pressure pipes. - Fittings and valves. - Large diameter pipes without pressure. Recommended melt temperature range 200 - 210°C. Processing conditions should be optimised for each production line.

The grade REPSOL ALCUDIA TR135 is a medium density polyethylene grade, high molecular weight hexene copolymer, especially intended for film extrusion. This material offers easy processability into thin films with excellent mechanical properties, good sealing characteristics and high stress crack resistance. It contains antioxidant additives. TYPICAL APPLICATIONS - Carrier Bags - Refuse sacks - Waterproof sheets Recommended melt temperature range from 190 to 220ºC. Processing conditions should be optimized for each production line.

The grade REPSOL ALCUDIA IMB UV2120/5 is a masterbatch of additives in LDPE specially designed for the production of films for greenhouses and tunnels covers. The grade REPSOL ALCUDIA IMB UV2120/5 contains a combination of HALS and other additives that protect the films of degradation. Applications The grade REPSOL ALCUDIA IMB UV2120/5 is specially recommended for the production of films for greenhouses and tunnels covers with excellent performance against thermal and UV degradation. Repsol recommends blend a minimum of 5 % ALCUDIA UV2120/5 with LDPE to produce films having a lifetime of two continuous agricultural seasons in the geographical zones where the maximum solar radiation is 160 kLy. The film duration depends on the quality of the blend. In order to obtain a very good dispersion and homogenization of the additives in the film, the blend must be done under the best conditions. For further information, please contact our Technical Service and Development Laboratory or our Customer Care Service.

The grade REPSOL ALCUDIA IMB UV2130/6 is a masterbatch of additives in LDPE specially designed for the production of films for greenhouses and tunnels covers. The grade REPSOL ALCUDIA IMB UV2130/6 contains a combination of HALS and other additives that protect the films of degradation. Applications The grade REPSOL ALCUDIA IMB UV2130/6 is specially recommended for the production of films for greenhouses and tunnels covers with excellent performance against thermal and UV degradation. Repsol recommends blend a minimum of 6 % REPSOL ALCUDIA UV2130/6 with LDPE or EVA/EBA copolymers to produce films having a lifetime of two continuous agricultural seasons in the geographical zones where the maximum solar radiation is 160 kLy. The film duration depends on the quality of the blend. In order to obtain a very good dispersion and homogenization of the additives in the film, the blend must be done under the best conditions. For further information, please contact our Technical Service and Development Laboratory or our Customer Care Service

The grade REPSOL ALCUDIA IMB UVH3A is a LDPE based masterbatch of additives specially designed for the production of films for greenhouses and tunnels covers. The grade REPSOL ALCUDIA IMB UVH3A contains a combination of the last generation HALS and low rate migration UV absorber. It also contains different antioxidants that prevent thermal degradation of the polymer during the extrusion process. Applications REPSOL ALCUDIA IMB UVH3A is specially recommended for the production of films for greenhouses and tunnels covers with excellent performance against thermal and UV degradation. The 200 µm thickness films produced with REPSOL ALCUDIA IMB UVH3A, according to the dose recommended in the table, have a lifetime from 3 seasons to 3 years in the geographical zones where the maximum solar radiation is 160 kLy. The film duration depends on the quality of the blend. In order to obtain a very good dispersion and homogenization of the additives in the film, the blend must be done under the best conditions. For further information, contact to Technical Assistance and Development Department or Commercial Attention Service.

The grade REPSOL ALCUDIA 17070M is low density polyethylene grade of very high fluidity, intended for injection moulding applications due to very low viscosity that allows an easy filling of the moulds, even with complex geometry, and it is very versatile to disperse pigments. It does not contain any additives. Applications • Caps and closures. • Toys. • Component in the preparation of masterbatches and blends with waxes and other polymers Recommended melt temperature range from 180 to 230ºC. Processing conditions should be optimized for each production line.

The grade REPSOL ALCUDIA 17150M is a low density polyethylene grade of very high fluidity, intended for diverse applications such as hot-melt adhesives, coatings, compounds and master-batches. Its formulation does not include additives. Applications - Hot-melt adhesives - Coatings - Viscosity modification in blends - Compounds - Master-batches Recommended melt temperature range from 180 to 230ºC. Processing conditions should be optimized for each production line.