EVA resin REPSOL PRIMEVA® P33045 is recommended for hot melt adhesives applications, when toughness and flexibility are required. It contains antioxidant and free flowing agent. Applications: - Hot Melt Adhesives -- Packaging -- Bookbinding -- Pressure sensitive adhesive coatings Recommended melt temperature below 200°C to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.

EVA resin REPSOL PRlMEVA® P33045S features low gel content and is specially designed for photovoltaic applications. It contains antioxidant and free flowing agent. Applications: - Encapsulant in solar panels. Recommended melt temperature below 200°C to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.

EVA resin REPSOL PRIMEVA® P33400 is recommended for low viscosity hot melt adhesives applications, when low viscosity and high vinyl acetate content are required. EVA resin REPSOL PRIMEVA® P33400 has been improved for a better stability against thermal degradation. It contains antioxidant and free flowing agent. Applications: - Hot Melt Adhesives -- Packaging -- Bookbinding -- Furniture. -- Pressure sensitive adhesive coatings Recommended melt temperature below 200°C to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.

EVA resin REPSOL PRIMEVA ® P40055 is recommended for adhesive formulations, sealants and solution coatings. It contains antioxidant and free flowing agent. Applications: - Hot Melt Adhesives - Pressure sensitive adhesive coatings. - Wood primers and sealers. - Inks formulations. - Can be used to produce semiconductive cables compounds. Recommended melt temperature below 200°C to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.

RECICLEX® 05RXM440D is a sustainable polypropylene with 5% post-consumer recycled material. It is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. Applications • Automotive: under the bonnet parts subjected to severe mechanical stresses • Technical parts, in general. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® 50RX5503 is a high-density polyethylene that contains 50% post-consumer recycled material sourced from industrial packaging. It is specially designed to make, by blow moulding-extrusion, containers for liquid detergents and chemicals. Good mechanical properties and excellent level of both stiffness and environmental stress cracking resistance can be obtained with RECICLEX® 50RX5503 due to its molecular weight and density. Carbon Footprint The estimated carbon footprint of RECICLEX® 50RX5503 grade is 1,29 kgCO2/kgLDPE, 30% less than virgin HDPE (''Cradle to gate''). Applications - Packaging of liquid detergents and chemicals. Recommended melt temperature range from 180 to 200ºC. Processing conditions should be optimized for each production line.

RECICLEX® 50RX55050 is a high-density polyethylene that contains 50% post-consumer recycled material sourced from industrial packaging. It is specially designed to make, by blow moulding-extrusion, industrial packaging with good mechanical performance. Carbon Footprint The estimated carbon footprint of RECICLEX® 50RX55050 grade is 1,17 kgCO2/kgHDPE, 40% less than virgin HDPE (''Cradle to gate''). Applications - Packaging of liquid detergents and chemicals. Recommended melt temperature range from 180 to 200ºC. Processing conditions should be optimized for each production line.

The grade RECICLEX® 55RX1830F is a sustainable polyethylene compound with 55% of post-consumer recycled material, verified under UNE-EN 15343 Certification. RECICLEX® 55RX1830F is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. Reaching 55% recycled, the grade is suitable for the production of stretch film with good mechanical properties. Carbon footprint The estimated carbon footprint of RECICLEX® 55RX1830F grade is 1,27 kgCO2/kgLDPE, 30% less than virgin LDPE (''Cradle to gate''). Applications • Stretch Film Recommended melt temperature range from 230 to 300ºC. Processing conditions should be optimized for each production line.

The grade RECICLEX® 60RX3235G is a sustainable polyethylene compound with 60% of post-consumer recycled material, verified by UNE-EN 15343 Certification. It contains 1200 ppm of slip agent. RECICLEX® 60RX3235G is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. This material offers easy processability and enhanced mechanical properties so it's suitable for thin blow film and cast applications. Carbon footprint The estimated carbon footprint of RECICLEX® 60RX3235G grade is 1,21 kgCO2/kgLDPE, 40% less than virgin LDPE (''Cradle to gate''). Applications • Hygiene overwrap films Recommended melt temperature range from 170 to 210ºC. Processing conditions should be optimized for each production line.

The grade RECICLEX® 70RX2805F is a sustainable polyethylene compound with 70% of post-consumer recycled material, verified by UNE-EN 15343 Certification. RECICLEX® 70RX2805F is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. The grade is suitable for the production of monolayer and multilayer extrusion blown film industrial applications, providing good mechanical properties. Carbon footprint The estimated carbon footprint of RECICLEX® 70RX2805F grade is 1,09 kgCO2/kgLDPE, 40% less than virgin LDPE (''Cradle to gate''). Applications • Shrink Film Applications • Films for general packaging • Medium duty industrial bags Recommended melt temperature range from 170 to 210ºC. Processing conditions should be optimized for each production line.

RECICLEX® 70RX5203 is a sustainable high-density polyethylene compound that contains 70% post-consumer recycled material, verified by the UNE-EN 15343 certification. Incorporating 70% recycled content, the compound allows the use of recycled material for the manufacture of extrusion-blown containers. Due to its formula and broad molecular weight distribution, it has good rigidity and resistance to cracking in an active environment (ESCR). Carbon Footprint The estimated carbon footprint of RECICLEX® 70RX5203 grade is 0,92 kgCO2/kgHDPE, 50% less than virgin HDPE (''Cradle to gate''). Applications - Blow moulded containers - Packaging of liquid detergents and chemicals. Recommended melt temperature range from 180 to 200ºC. Processing conditions should be optimized for each production line.

The grade RECICLEX® 80RX2310F is a sustainable polyethylene compound with 80% of post-consumer recycled material, verified by UNE-EN 15343 Certification. RECICLEX® 80RX2310F is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. With 80% of post-consumer material, RECICLEX® 80RX2310F is suitable for monolayer or multilayer blown film applications. Carbon footprint The estimated carbon footprint of RECICLEX® 80RX2310F grade is 0,97 kgCO2/kgLDPE, 50% less than virgin LDPE (''Cradle to gate''). Applications - General packaging - Medium duty industrial bags Recommended melt temperature range from 170 to 210ºC. Processing conditions should be optimized for each production line.

RECICLEX® 80RX55050 is a high-density polyethylene that contains 80% post-consumer recycled material sourced from industrial packaging. It is specially designed to make, by blow moulding-extrusion, industrial packaging with good mechanical performance. Carbon Footprint The estimated carbon footprint of RECICLEX® 80RX55050 grade is 0,80 kgCO2/kgHDPE, 60% less than virgin HDPE (''Cradle to gate''). Applications - Packaging of liquid detergents and chemicals. Recommended melt temperature range from 180 to 200ºC. Processing conditions should be optimized for each production line.

The grade RECICLEX® 85RX2310F is a sustainable polyethylene compound with 85% of post-consumer recycled material, verified under UNE-EN 15343 Certification. RECICLEX® 85RX2310F is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. With 85% of post-consumer material, RECICLEX® 85RX2310F is suitable for monolayer or multilayer blown film applications. Carbon footprint The estimated carbon footprint of RECICLEX® 85RX2310F grade is 0,91 kgCO2/kgLDPE, 50% less than virgin LDPE (''Cradle to gate''). Applications • General packaging • Medium duty industrial bags Recommended melt temperature range from 170 to 210ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CBIO1810FG is a bio-based polyolefin derived from the use of alternative raw materials coming from renewable and sustainable plastic waste as well as from the biodegradable fraction coming from industrial and municipal waste. It is certified by a mass balance methodology according to the requirements of the International Sustainability and Carbon Certification (ISCC PLUS). REPSOL RECICLEX® CBIO1810FG is a metallocene ethylene-hexene copolymer. This material offers easy processability into thin films with excellent mechanical and optical properties. Good sealing characteristics. It contains processing aid, thermal stabilizers, anti-block (2500 ppm) and slip agent (1000ppm) additives. Applications • Heavy duty packaging • Seal layer in co-extrusions • Excellent gloss and clarity • Industrial film: Stretch Hood, Stretch Film and Shrink Film • Agriculture applications: silage, mulching film and greenhouses Recommended melt temperature range from 180 to 230ºC. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CBIO5503 is a bio-based polyolefin derived from the use of alternative raw materials coming from renewable and sustainable plastic waste as well as from the biodegradable fraction coming from industrial and municipal waste. It is certified by a mass balance methodology according to the requirements of the International Sustainability and Carbon Certification (ISCC PLUS). REPSOL RECICLEX® CBIO5503 is medium molecular weight high-density polyethylene copolymer of hexene. It is specially designed to make, by blow molding-extrusion, containers for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good mechanical properties and excellent level of both stiffness and environmental stress cracking resistance can be obtained with REPSOL RECICLEX® CBIO5503 due to its molecular weight and density. Applications - Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CBIOHVA18G is a bio-based polyolefin derived from the use of alternative raw materials coming from renewable and sustainable plastic waste as well as from the biodegradable fraction coming from industrial and municipal waste. It is certified by a mass balance methodology according to the requirements of the International Sustainability and Carbon Certification (ISCC PLUS). REPSOL RECICLEX® CBIOHVA18G is an ethylene-vinyl acetate copolymer used for the extrusion of medical film and production of medical bags. This material combines easy processability with excellent mechanical and optical properties. It contains antioxidant additives. For specific information on sterilization resistance, please contact the Technical Service & Development Department. Recommended melt temperature below 200ºC to avoid the decomposition of the polymer. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CBIOP1340 is a bio-based polyolefin derived from the use of alternative raw materials coming from renewable and sustainable plastic waste as well as from the biodegradable fraction coming from industrial and municipal waste. It is certified by a mass balance methodology according to the requirements of the International Sustainability and Carbon Certification (ISCC PLUS). EVA copolymer REPSOL RECICLEX® CBIOP1340 is suitable for injection moulding and extrusion. This material is specially recommended for those applications where flexibility, toughness and transparency are required. It contains antioxidant additives. Applications • Extrusion. • Injection moulding. Release agents containing silicone must be avoided • Microcellular foams. Recommended melt temperature below 200ºC to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CBIOP28025 is a bio-based polyolefin derived from the use of alternative raw materials coming from renewable and sustainable plastic waste as well as from the biodegradable fraction coming from industrial and municipal waste. It is certified by a mass balance methodology according to the requirements of the International Sustainability and Carbon Certification (ISCC PLUS). EVA resin REPSOL RECICLEX® CBIOP28025 is recommended for hot melt adhesives and blends with waxes. It contains antioxidant and free flowing agent. Applications • Hot Melt Adhesives • Packaging • Bookbinding • Carpet backing • Blends with bitumen and asphalts Recommended melt temperature below 200ºC to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CBIOP28400 is a bio-based polyolefin derived from the use of alternative raw materials coming from renewable and sustainable plastic waste as well as from the biodegradable fraction coming from industrial and municipal waste. It is certified by a mass balance methodology according to the requirements of the International Sustainability and Carbon Certification (ISCC PLUS). EVA resin REPSOL RECICLEX® CBIOP28400 is recommended for low viscosity hot melt adhesives applications. EVA resin REPSOL RECICLEX® CBIOP28400 has been improved for a better stability against thermal degradation. It contains antioxidant and free flowing agent. Applications • Hot Melt Adhesives. • Packaging. • Bookbinding. Recommended melt temperature below 200ºC to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CBIOP2870 is a bio-based polyolefin derived from the use of alternative raw materials coming from renewable and sustainable plastic waste as well as from the biodegradable fraction coming from industrial and municipal waste. It is certified by a mass balance methodology according to the requirements of the International Sustainability and Carbon Certification (ISCC PLUS). EVA resin REPSOL RECICLEX® CBIOP2870 is recommended for hot melt adhesives applications, injection moulding and extrusion of profiles. It contains antioxidant and free flowing agent. Applications • Injection moulding. Release agents containing silicone must be avoided. • Hot Melt Adhesives. • Packaging. • Edge veneering. • Shoe industry. • Manufacture of masterbatches. • Microcellular foams. • Manufacture of sonic damping sheets. Recommended melt temperature below 200ºC to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CIRC1810F is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC1810F is a metallocene ethylene-hexene copolymer. This material offers easy processability into thin films with excellent mechanical and optical properties. Good sealing characteristics. It contains processing aid and thermal stabilizers. Applications • Heavy duty packaging • Seal layer in co-extrusions • Excellent gloss and clarity • Industrial film: Stretch Hood, Stretch Film and Shrink Film • Agriculture applications: silage, mulching film and greenhouses Recommended melt temperature range from 180 to 230ºC. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CIRC1810FG is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC1810FG is a metallocene ethylene-hexene copolymer. This material offers easy processability into thin films with excellent mechanical and optical properties. Good sealing characteristics. It contains processing aid, thermal stabilizers, anti-block (2500 ppm) and slip agent (1000ppm) additives. Applications • Heavy duty packaging • Seal layer in co-extrusions • Excellent gloss and clarity • Industrial film: Stretch Hood, Stretch Film and Shrink Film • Agriculture applications: silage, mulching film and greenhouses Recommended melt temperature range from 180 to 230ºC. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CIRC1970C is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC1970C is a low density polyethylene for extrusion coating, especially developed for high speed coating. Very high drawdown speeds are achieved throughout the extrusion temperature range, and thin coatings are possible at low temperatures. The molecular structure of the polymer produces an excellent clear coating. Applications • Extrusion coating. • Coextruded thin film. Recommended melt temperature range from 280 to 330ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CIRC2107F is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC2107F is a low density polyethylene grade, produced by high pressure autoclave technology, for blown film applications. This material offers easy processability and good balance of mechanical properties. It does not contain any additives. Applications • Fine shrink films • Carrier-bag films. • Medium duty bags • Lamination films/ Food packaging. Recommended melt temperature range from 160 to 190ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CIRC2203F is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC2203F is a low density polyethylene grade, produced by high pressure autoclave technology, for blown or cast film applications. This material offers easy processability and good balance of mechanical properties. Applications • General Packaging Films • Heavy duty bags • Shrink film with high mechanical resistance • Construction and agricultural films Recommended melt temperature range from 170 to 220ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CIRC2710F is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC2710F is a medium density metallocene ethylene-hexene copolymer. This material offers easy processability into thin films with excellent stiffness, mechanical and optical properties. It contains processing aid and thermal stabilizers. Applications • Blown Film • Bakery Film • Food packaging film • Industrial film Recommended melt temperature range from 180 to 240ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CIRC2805F is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC2805F is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for blown film applications. This material offers easy processability and an excellent balance of mechanical and optical properties. It contains antioxidant additives. Applications • Shrink films/ hoods. • Coextruded films with good optical properties and excellent mechanical properties. Recommended melt temperature range from 170 to 210ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CIRC5503 is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC5503 is medium molecular weight high-density polyethylene copolymer of hexene. It is specially designed to make, by blow molding-extrusion, containers for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good mechanical properties and excellent level of both stiffness and environmental stress cracking resistance can be obtained with REPSOL RECICLEX® CIRC5503 due to its molecular weight and density. Applications - Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CIRC5803 is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC5803 is a bimodal high-density polyethylene with middle molecular weight. It is specially designed to make containers for liquid detergents and chemicals by extrusion-blow molding. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good mechanical properties and excellent level of both stiffness and environmental stress cracking resistance can be obtained with REPSOL RECICLEX® CIRC5503 due to its molecular weight and density. Applications - Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CIRC6006L is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRC6006L is a high density polyethylene copolymer of hexene with medium molecular weight. It is specially designed to make, by extrusion-blow moulding, milk bottles. This grade contains a package of additives that includes the antioxidant necessary to reinforce the thermal stability. It has excellent performance in extrusion and tower sterilization. Its characteristics give it, on the one hand, a high rate of extrusion and, on the other, an excellent rigidity that gives the containers a very good resistance to deformation due to stacking loads during storage. Applications - Bottles (mono and multi-layer) for dairy products and food. Recommended melt temperature range from 170 to 190ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CIRCR4805EP is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. The grade REPSOL RECICLEX® CIRCR4805EP is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of tapes with high tensile strength at break. This product is specially formulated with a slip package. Applications - Iso Mayer textile applications. - Raschel knitted and woven fabrics. - Twines and ropes. Recommended melt temperature range from 210 to 230ºC. Processing conditions should be optimized for each production line.

The grade REPSOL RESISTEX® 1614FG is a metallocene ethylene-hexene copolymer. This material has easy processability during its transformation, which is especially intended for films with low thickness. This material offers outstanding impact and puncture resistance, excellent optical properties and very low initial seal temperature, ideal for high-demand blown film applications. As additives it contains processing aid, thermal stabilizers, anti-block (2500 ppm) and slip agent (1000 ppm). Applications • Food packaging • Seal layer in co-extrusions: low seal initiation temperature for FFS packaging • Lamination • Freezer Films • Agriculture applications: silage, mulch film and greenhouses Recommended melt temperature range from 180 to 230ºC. Processing conditions should be optimized for each production line.

REPSOL RESISTEX® 1810F is a metallocene ethylene-hexene copolymer. This material offers easy processability into thin films with excellent mechanical and optical properties. Good sealing characteristics. It contains processing aid and thermal stabilizers. Applications • Heavy duty packaging • Seal layer in co-extrusions • Excellent gloss and clarity • Industrial film: Stretch Hood, Stretch Film and Shrink Film • Agriculture applications: silage, mulching film and greenhouses Recommended melt temperature range from 180 to 230ºC. Processing conditions should be optimised for each production line.

REPSOL RESISTEX® 1810FG is a metallocene ethylene-hexene copolymer. This material offers easy processability into thin films with excellent mechanical and optical properties. Good sealing characteristics. It contains processing aid, thermal stabilizers, anti-block (2500 ppm) and slip agent (1000ppm) additives. Applications • Heavy duty packaging • Seal layer in co-extrusions • Excellent gloss and clarity • Industrial film: Stretch Hood, Stretch Film and Shrink Film • Agriculture applications: silage, mulching film and greenhouses Recommended melt temperature range from 180 to 230ºC. Processing conditions should be optimised for each production line.

The grade REPSOL RESISTEX®1820FG is a metallocene ethylene-hexene copolymer with easy processability during transformation, which is especially intended for films with low thickness. This material offers outstanding impact and puncture resistance, as well as excellent optical and seal properties, hence ideal for high-demand blown film applications. As additives it contains processing aid, thermal stabilizers, anti-block (2500 ppm) and slip agent (1000ppm). Applications • Food packaging • Seal layer in co-extrusions: low seal initiation temperature for FFS packaging • Lamination • Freezer films • Agriculture applications: silage, mulching film and greenhouses Recommended melt temperature range from 180 to 230ºC. Processing conditions should be optimized for each production line.

The grade REPSOL RESISTEX®1835C is a metallocene ethylene-hexane copolymer, which is especially intended for monolayer and multilayer cast film with high stretchability, and for cable insulation by monosil process. This material offers outstanding tensile properties, impact and puncture resistance, as well as excellent optical properties. It contains thermal stabilizers as additives. Applications • Cast Film • Cast Stretch Film • Food packaging film • Low voltage cables isulation by monosil process Processing conditions should be optimised for each production line and other applications.

The grade REPSOL RESISTEX® 1835F is a metallocene ethylene-hexene copolymer, which is especially intended for monolayer and multilayer cast film with high stretchability. This material offers outstanding tensile properties, impact and puncture resistance, as well as excellent optical properties. It contains thermal stabilizers as additives. Applications • Cast film • Cast Stretch Film • Food packaging film Recommended melt temperature range from 230 to 300ºC. Processing conditions should be optimized for each production line.

The grade REPSOL RESISTEX® 1845F is a metallocene ethylene-hexene copolymer, which is especially intended for monolayer and multilayer cast film with high stretchability. This material offers outstanding tensile properties, impact and puncture resistance, as well as excellent optical properties. It contains thermal stabilizers as additives. Applications • Cast Film • Stretch Film • Food packaging film • Hygiene Film/Personal Care Recommended melt temperature range from 230 to 300ºC. Processing conditions should be optimized for each production line.

The grade REPSOL RESISTEX® 2710F is a medium density metallocene ethylene-hexene copolymer. This material offers easy processability into thin films with excellent stiffness, mechanical and optical properties. It contains processing aid and thermal stabilizers. Applications • Blown Film • Bakery Film • Food packaging film • Industrial film Recommended melt temperature range from 180 to 240ºC. Processing conditions should be optimized for each production line.