DOW DNDA-1055 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for high-speed injection molding of thin-walled parts such as lids. This resin has been designed to have an excellent balance of processability and impact strength. Main Characteristics: - Excellent processability - Good low temperature impact strength - Balanced density and melt index Complies with: - U.S. FDA 21 CFR 177/1520(c)3.1a - Canadian HPFB No Objection Consult the regulations for complete details.

- Injection molding - Lids - Excellent processability with good low temperature impact strength and rigidity - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with FDA-DMF - Complies with EU, No 10/2011 - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - Consult the regulations for complete details. DOW DNDA-1081 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for highspeed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability, impact strength, and rigidity.

- Injection molding - Lids - Excellent processability with good low temperature impact strength and rigidity - Very narrow molecular weight distribution - Complies with EU, No 10/2011 - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Consult the regulations for complete details. DOW DNDA-1082 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for highspeed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability, impact strength, and rigidity.

DOW™ DNDA-1088 NT 7 Linear Low Density Polyethylene (LLDPE) is produced via UNIPOL™ Process Technology and is intended for high-speed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability, impact strength, and rigidity. Overview: - Injection molding - Lids - Excellent processability with good impact strength and rigidity - Narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520(c )3.1a - Europe Commission Regulation (EU) No 10/2011 (See NOTES) Consult the regulations for complete details.

- Injection molding - Large industrial containers and trash cans - Excellent low temperature impact strength, rigidity, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with -- U.S. FDA 21 CFR 177.1520 (c)3.1a -- CANDIAN HPFB NO OBJECTION ( WITH LIMITATIONS) -- EU, No 10/2011 -- U.S. FDA -DMF -- Consult the regulations for complete details. DOW DNDA-7144 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for use in injection molding applications such as large industrial containers and trash cans. This resin has been designed to have excellent impact strength, rigidity, environmental stress crack resistance and processability.

- High melt strength - Excellent low temperature toughness - Outstanding environmental stress crack resistance - Exceptional flex life - Industrial Standards Compliance: -- ASTM D3350: cell classification PE123110A - Complies with: -- U.S. FDA 21 CFR 177.1520 (c) 3.1a -- US FDA-DMF -- Canadian HPFB No Objection (with limitations) -- EU, No 10/2011 -- Consult the regulations for complete details. DOW DNDA-7340 NT 7 Linear Low Density Polyethylene (LLDPE) Resin offers outstanding flex life, toughness and environmental stress crack resistance (ESCR) and is well-suited for use in blow molding applications such as small, squeezable bottles, as well as, extruded flexible hoses and, tubing. Offering high melt strength, excellent toughness and outstanding ESCR, DOW DNDA- 7340 NT 7 LLDPE resin also is well-suited for use in large blow molded parts, such as drum liners. Additionally, It may also be used in certain sheet and tubing applications where these properties are also important.

- Injection molding - General purpose applications - Excellent low temperature impact strength, rigidity, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with EU, No 10/2011 - Complies with U.S. FDA-DMF - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - Consult the regulations for complete details. DOW DNDA-8320 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using the UNIPOL™ PE Process Technology and is intended for use in general purpose injection molding applications. This resin has been designed to have excellent impact strength, rigidity, environmental stress crack resistance and processability.

DOW DNDA-8335 NT 7 线性低密度聚乙烯 (LLDPE) 树脂的制备采用了UNIPOL™ PE 工艺技术，适用于通用的注塑加工。这种树脂具有优异的抗冲击强度、刚性、耐环境应力开裂性能和加工性能。 - 注塑 - 通用型 - 优异的低温抗冲击强度、耐应力开裂性能和加工性能 - 分子量分布非常窄 符合美国食品和药物管理局法规 21 CFR 177.1520 (c)3.1a的要求 - EU Food Contact 请查询法规以获取完备的细节资料。

- Injection molding - Lids - Excellent processability with good low temperature impact strength - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with CANADIAN HPFB NO OBJECTION (With Limitiations) - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW DNDB-1077 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for highspeed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability and impact strength.

DNDB-7147 NT 7 线性低密度聚乙烯 (LLDPE) 树脂的制备使用了UNIPOL™ PE 工艺技术，用于诸如食品容器、家用器具以及盖材的注塑加工。这种树脂在抗冲击强度、刚性、耐环境应力开裂性能和加工性能之间具有优异的平衡性。 主要特性： - 注塑 - 优异的低温抗冲击强度、刚性、耐应力开裂性能和加工性能 - 分子量分布非常窄 - 符合美国食品和药物管理局法规 21 CFR 177.1520(c)3.1a的要求 请查询法规以获取完备的细节资料。

符合的业界标准 - ASTM D 3350： 分档 PE123110A - 符合美国食品和药物管理局法规 21 CFR 177.1520 (c) 3.1a的要求 - EU, No 10/2011 - 请查询法规以获取完备的细节资料。 DOW DNDB-7441 NT 7 线性低密度聚乙烯树脂的制备使用了UNIPOL™ 工艺技术。该产品应用于软管和管件领域，亦用于密封垫片、螺旋缠绕软管和波纹管的加工。该产品牵伸性能好，熔体不易破裂，还具有低温韧性，亚光表面效果均匀，挠曲寿命优异。与相同密度的常规高压、低密度聚乙烯树脂相比，其模量（挺度）要高50%。该产品特别适宜于异型材挤出，这种加工要求耐应力开裂、耐挠曲磨损以及容易挤出加工。亦可将其作改性剂，与柔软的共聚物共混，比如乙烯-醋酸乙酯（EVA）和乙烯-丙烯酸乙酯（EAA）等，以提高刚性。

DOW GRSN-2070 NT 线性低密度聚乙烯粉料料的制备使用了UNIPOL™ 工艺技术。这种粉料产品应用于色母料和母料的生产。

Overview: - Granular form - Carrier resin for masterbatch systems Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.2a - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details. DOW GRSN-9802 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is supplied in granular form. This resin is specifically designed as a carrier resin for color concentrates and other masterbatch systems. The fine particle size reduces the need for grinding, and the high surface area of granular resin allows for more uniform dispersion of concentrate in the final product. GRSN- 9802 NT 7 is compatible with polyethylene and polypropylene resins and can be used in a wide variety of fabrication processes.

- Granular form - Carrier resin for masterbatch systems - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW GRSN-9820 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is supplied in granular form. This resin is specifically designed as a carrier resin for color concentrates and other masterbatch systems. The fine particle size reduces the need for grinding, and the high surface area of granular resin allows for more uniform dispersion of concentrate in the final product. GRSN-9820 NT 7 is compatible with polyethylene and polypropylene resins and can be used in a wide variety of fabrication processes.

- Octene copolymer - Linear Low Density Polyethylene - For blown and cast film applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulation for complete details.

- Octene Copolymer - Linear Low Density Polyethylene - For high speed blown film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.

- Octene Copolymer - Linear Low Density Polyethylene - For high speed blown film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.

DOW HDPE 05962B is a High Density Polyethylene produced via SOLUTION™ technology. This resin presents a narrow molecular weight distribution that offers excellent impact resistance in rigid packaging, high gloss, excellent stiffness and processability. Main Characteristics - Resin for Injection Molding - Pails and Crates - Resin for Cast film - Film for diapers, femine hygiene Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 Consult the regulations for complete details

DOW HDPE 08454N Resin is a narrow molecular weight distribution copolymer designed to offer excellent impact strength and toughness with good stiffness. This resin has good processability over a wide range of molding conditions. - For structural foams, industrial containers, cases/crates - Excellent impact strength, toughness and good stiffness Complies with: - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA-DMF - U.S. USP Consult the regulations for complete details.

- For toys and housewares - Good low temperature impact strength, gloss and excellent toughness - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details. DOW HDPE 17450N is a narrow molecular weight distribution copolymer designed to offer low temperature impact strength and gloss with excellent toughness. This resin has good processability over a wide range of molding conditions.

高密度聚乙烯25055E 高密度聚乙烯树脂的分子量分布非常窄，其开发目的是为了在赋予注塑制件以优异的机械性能、高光泽度以及高级的表面整饰效果的同时，还具有加工简易的特点。 应用领域： - 家用器具 - 食品容器 - 玩具 符合以下法规要求： - 欧盟（EU） No 10/2011 - 美国食品和药品管理局（U.S. FDA）21 CFR 177.1520 - 加拿大健康产品和食品局（HPFB） (无反对意见) 请查阅法规以获取详尽资料。

HDPE 35054L is a bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance of mechanical properties and a very high Environmental Stress Cracking Resistance (ESCR). Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Lubricants -- Car care products -- Toys -- Automotive Parts Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulation for complete details

HDPE 35057L is a Bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance between stiffness and Environmental Stress Crack Resistance (ESCR). It is especially suitable for the production of bottles, containers and technical hollow articles Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Mineral oils -- Car care products - Toys - Automotive parts Complies with: - FDA regulation 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

DOW™ HDPE 35060A is a High Density Polyethylene resin produced in the Slurry Process. This resin presents good impact and environmental stress cracking resistance. Its high density allows reducing the weight of the container while maintaining good rigidity. Main Characteristics: - Used in the production of jars for detergents, mineral oils, cleaning products, food, cosmetics - Containers - Toys - Parts for cars Complies with: - U.S. FDA 21 177 1520 (c) 3.2a - EU, No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 35060L is a High Density Polyethylene intended for Blow Molding applications. The bimodal molecular weight distribution of this resin leads to a high environmental stress crack resistance without sacrificing the rigidity (density). Its high density allows for weight reduction keeping the container performance. It is especially suitable for the production of bottles, containers and technical hollow articles Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Mineral oils -- Car care products - Toys - Automotive parts Complies with: - U.S. FDA 21 177 1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 40055L HF is a bimodal High Density Polyethylene resin that combines outstanding environmental stress crack resistance with good stiffness and impact resistance. Its rheological characteristics make it ideal for the production of medium size containers. The viscosity of this resin has been specially tailored for machinery that requires slightly higher fluidity than the one provided by the Dow™ HDPE 40055L. Applications: - Jerrycans and medium size containers for: -- Aggressive liquids (e.g. detergents, surfactants, etc.) -- Chemicals -- Agrochemicals -- Food products - Containers requiring UN approval for the transport of dangerous goods - Industrial parts - Sheet extrusion Complies with Regulation: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12. Consult the regulation for complete details

HDPE 40055L is a bimodal High Density Polyethylene resin that combines outstanding environmental stress crack resistance (ESCR) with good stiffness and impact resistance. Its rheological characteristics make it ideal for the production of medium size containers Applications: - Jerrycans and medium size containers for: -- Aggressive liquids (e.g. detergents, surfactants, etc) -- Chemicals -- Agrochemicals -- Food products - Containers requiring UN approval for the transport of dangerous goods - Industrial parts - Sheet extrusion Complies with: - FDA regulation 177.1520(c)3.2a - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 80017 is a High Density Polyethylene, copolímero of medium molecular weight, produced in the Slurry Process. This resin presents an excellent balance of properties and processability. Because of its molecular structure, this material combines a high impact resistance and Environmental Stress Cracking Resistance (ESCR), with high rigidity, suitable for the fabrication of corrugated pipes of single and double wall. Main Characteristics: - Corrugated pipes of single and double wall - Pipes for drain and waste - Complies with FDA 21 CFR 177.1520(c) 3.2a - Consult the regulation for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

DOW™ HDPE 8262B is high density resin designed for use in reusable boxes and drawers as well as injection of rigid parts. Main Characteristics - High Density Polyethylene Resin (HDPE) - Excellent processability, UV stabilized Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

符合的业界标准 - ASTM D 3350: 分档 PE346460A (参见备注 1) - 美国各州高速公路和运输工作者协会 (AASHTO) M294/MP7 (参见备注 2) DOW DGDA-2485 NT 高密度聚乙烯树脂的制备采用了UNIPOL™ II 工艺技术，应用广泛，包括有诸如波纹管道的异型材挤出加工。它综合了优异的ESCR/NCLS 性能和优异的韧性以及加工性能。 备注： (1) 标准分档中的前5位数字代表了产品所用的原色树脂。最后一位数字和后面的字母代表了黑色树脂(原色树脂中加入6.5% DFNF-0092)。 (2) 在适当的加工条件下，可添加炭黑色母料DFNF-0092 (6.5%) 对原色树脂进行挤出加工。