DOW LDPE 410E 低密度聚乙烯树脂是一种高透明度树脂，用于复合薄膜和高透明度外包装膜加工。这种树脂不含滑爽剂和开口剂，可采用普通的吹塑薄膜工艺进行挤出加工，加工熔融温度在170至195°C之间，其流延薄膜的熔体温度在180 至240°C之间。制备得当时，这种树脂具有优异的加工性能和牵伸性能，韧性和抗冲击性能优异，光学性能优异以及拉伸强度和抗撕裂强度优异的特点。 应用领域： - 复合薄膜 - 食品包装薄膜 - 卫生用薄膜 - 流延薄膜 - 气泡膜 - 发泡PE - 挤出涂覆 Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE 410F Low Density Polyethylene Resin is a high clarity resin designed for lamination film and clarity over wrap applications. This resin does not contain slip and antiblock additives. It can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 195°C; and cast film using temperatures between 180 and 220°C. This resin when properly fabricated shows: excellent processability and draw down, outstanding toughness and impact properties, superior optical properties, excellent tensile and tear strength. Main Characteristics: - DOW LDPE 410F Low Density Polyethylene Resin should comply with FDA regulation 177.1520 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations.

DOW LDPE™ 421E 低密度聚乙烯树脂可采用普通的吹塑薄膜工艺进行挤出加工，熔体温度在160 至195°C之间。制备得当时，与标准树脂相比，这种树脂即便具有更高的密度（挺度高）下也具有优异的机械性能， 同时还保持着非常高的透明度和光泽度。这种树脂具有较好的牵伸性能和加工性能。这种产品不含滑爽剂或者开口剂。 法规要求： DOW LDPE 421E 低密度聚乙烯树脂应该符合以下法规要求： 美国食品和药物管理局法规 21 CFR 177.1520(c)2.2 EU, No 10/2011 请查询法规以获取完备的细节资料。 应用领域： - 透明度高的复合薄膜 - 软质物品的性包装材料，比如纸巾、卫生纸、妇女卫生用品 - 透明度高的纸巾包装膜 - 生鲜食品袋 - 食品包装薄膜

DOW LDPE 432E is a high clarity resin designed for lamination film and clarity overwrap applications. This resin contains slip and antiblock additives. When properly fabricated, this product displays excellent processability and draw down, and a very good balance of film impact resistance, tensile strength and tear resistance. Main Applications: - Lamination films - Food packaging films Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE 450E R Low Density Polyethylene Resin has been designed with an optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion. When properly fabricated, DOW LDPE 450E R displays: excellent processability; low neck-down (cast film); very good toughness and impact properties; and good tear strength. In foam extrusion, DOW LDPE 450E R gives an ideal balance between cell growth and stabilization to allow the production of very low density products without voids. Main Characteristics: - Cast film - Foam - Bubble film - General purpose blown film Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2. - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE 450E REN Low Density Polyethylene Resin has been designed with an optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion. When properly fabricated, DOW LDPE 450E REN displays: excellent processability; low neck-down (cast film); very good toughness and impact properties; and good tear strength. In foam extrusion, DOW LDPE 450E REN gives an ideal balance between cell growth and stabilization to allow the production of very low density products without voids. Main Characteristics: - Cast film - Foam - Bubble film - General purpose blown film Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2. - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE 450 E 低密度聚乙烯树脂在熔体强度和拉延性之间具有最佳平衡，在流延薄膜、发泡材料、吹塑薄膜和气泡薄膜的挤出加工中具有优异的性能表现。当制备得当时，DOW LDPE 450 E 具有以下性能：优异的加工性能；缩颈小（流延薄膜）；韧性和抗冲击性能很好；而且抗撕裂强度好。在发泡挤出成型时，DOW LDPE 450 E在泡孔生长和稳定性之间具有极佳的平衡，可使极低密度的产品在生产过程中不会产生空洞。 主要特性： - 流延薄膜 - 发泡材料 - 气泡膜 - 通用型吹塑薄膜 - EU, No 10/2011。 - 符合美国食品和药物管理局法规 21 CFR 177.1520(c)2.2的要求。请查询法规以获取完备的细节资料。 - Canadian HPFB No Objection 滑爽剂含量：无 开口剂含量：无

Dow LDPE 5004I is used for fresh milk cartons, liquid/juice containers, dry foods packaging, snack foods packaging, moist foods packaging, and medical packaging. Dow LDPE extrusion coating resins provide optimal neck-in and draw-down performance with minimal taste/odor contribution. - A low melt index coating resin for demanding packaging applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2 - U.S. FDA -DMF - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - Japan Hygienic Olefin and Styrene Plastics Association Consult the regulations for complete details.

Polyethylene 5005 Low Density is used for fresh milk cartons, liquid/juice containers, dry foods packaging, snack foods packaging, moist foods packaging, and medical packaging. DOW LDPE extrusion coating resins provide optimal neck-in and draw-down performance with minimal taste/odor contribution. Main Characteristics: - A low melt index coating resin for demanding packaging applications Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - Consult the regulations for complete details.

- A resin for clarity and bakery film applications - Optimum gauge range: 1.0 - 3.0 mil - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1 - Complies with U.S. FDA - DMF - Complies with EU, No 10/2011 - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details.

- A slip and Antiblock additive resin for liners, industrial and clarity - Optimum gauge range: 1.0-3.0 mil - Complies with U.S. FDA 21 CFR 177.1520(c)2.2. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

DOW LDPE 505I Resin is a barefoot grade for general purpose blown film applications. Main Characteristics: - Blown film extrusion - Pellet form Complies with: - U.S. FDA, 21 CFR 177.1520(c)2.1 - Europe EU No. 10/2011 - Consult the regulations for complete details.

DOW LDPE 515E 低密度聚乙烯树脂的熔融指数为3.2，是一种中等密度的LDPE 树脂，适用于纸巾包装的高度生产线，这种树脂在诸如光泽度和雾度在内的光学性能、挺度和低摩擦系数COF之间具有良好的平衡性。这种产品含有滑爽剂和开口剂。 备注： 当应用于接触食品的应用领域时，在未经改性以及加工流程遵循良好制造规范要求时，DOW LDPE 515E 低密度聚乙烯树脂应该符合美国食品和药物管理局法规177.1520(c)2.2的要求以及绝大多数欧洲国家的食品接触法规的要求。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： - 软质物品的包装材料，比如纸巾、卫生纸、妇女卫生用品 - 透明度高的纸巾包装膜

DOW LDPE 525E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 160 and 195 °C. This resin, when properly fabricated, shows excellent mechanical properties, consistent with its higher density (high stiffness) when compared to standard resins, whilst maintaining very high clarity and gloss. It shows good draw down properties and processability. This product does not contain slip nor anti-block additives. Note: DOW LDPE 525E Low Density Polyethylene Resin should comply with U.S. FDA 21 CFR 177.1520(c)2.2 and with EU, No 10/2011 when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for whether the use complies with all relevant regulations. Further Complies with: - ISCC PLUS certification for renewable-based plastics Applications: - High clarity lamination films. - Label Films - Packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products. - High clarity tissues overwrap film. - Produce bags. - Food packaging films.

DOW LDPE 525E REN Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 160 and 195 °C. This resin, when properly fabricated, shows excellent mechanical properties, consistent with its higher density (high stiffness) when compared to standard resins, whilst maintaining very high clarity and gloss. It shows good draw down properties and processability. This product does not contain slip nor anti-block additives. Applications: - High clarity lamination films. - Label Films - Packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products. - High clarity tissues overwrap film. - Produce bags. - Food packaging films. Complies with: - U.S. FDA 21 CFR 177.1520 (c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics

DOW LDPE 525E 低密度聚乙烯树脂易于使用常用的吹塑薄膜技术进行加工，熔体温度范围在160 至195°C。当制备得当时，这种树脂具有优异的机械性能，与标准树脂相比，在其密度较高（挺度高）的情况下依然可以保持稳定性，同时还保持着非常高的透明度和光泽度。它具有良好的牵伸性能和加工性能。该产品不含滑爽剂，也不含防粘连剂。 备注： 当应用于接触食品的应用领域时，在未经改性以及加工流程遵循良好制造规范要求时，DOW LDPE 525E 低密度聚乙烯应该符合美国食品和药物管理局法规21 CFR 177.1520(c)2.2, EU, No 10/2011。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： - 高透明度复合薄膜 - 标签薄膜 - 软质物品的包装，比如面巾纸、卫生纸、妇女卫生用品等 - 高透明度纸巾包装薄膜 - 生鲜食品包装袋 - 食品包装薄膜

DOW LDPE 535E 是一种熔融指数为0.6的中等密度的LDPE，适用于收缩薄膜的加工，在收缩性能（热收缩和冷收缩）、诸如高光泽度和低雾度在内的光学性能以及机械性能之间具有较好的平衡性。 主要特性： - 低密度聚乙烯树脂 - 吹塑薄膜的挤出加工 - 热收缩膜 - 符合以下法规： 美国食品和药物管理局法规21 CFR 177.1520(c) 2.2 EU, No 10/2011 请查询法规以获取完备的细节资料。

- 符合美国食品和药物管理局法规 21 CFR 177.1520(c) 2.2的要求 - 符合加拿大健康产品和食品局(HPFB)的要求：无反对意见(带有限制条件) - EU, No 10/2011 - 请查询法规以获取完备的细节资料。

DOW LDPE™ 545E 是一种熔融指数为0.9 ，中密度的LDPE树脂，用于冷食小吃的收缩膜加工，在收缩性能（热收缩和冷收缩）、诸如高光泽度和低雾度在内的光学性能以及机械性能之间具有较好的平衡性。 主要特性： - 低密度聚乙烯树脂 - 薄膜挤出加工：吹塑 - 收缩膜 - 与LLDPE共混 - 符合以下法规： EU, No 10/2011 美国食品和药物管理局法规 177.1520(c)2.2 请查询法规以获取完备的细节资料。

DOW LDPE 555E is a low density polyethylene resin with a fractional melt index especially designed for shrink films and industrial and consumer blown films. This resin provides exceptional bubble stability, high levels of shrink, excellent balance of stiffness, toughness and tear resistance, and a very good clarity. Main Characteristics: - High output rates - Very high shrink - Good stiffness-toughness balance - High puncture resistance - High tear resistance

DOW LDPETM 582E 聚乙烯树脂可采用普通的吹塑薄膜工艺进行挤出加工，熔体温度在150 和170°C之间。制备得当时，DOW LDPE 582E 聚乙烯树脂具有良好的机械性能和较高的光学性能。该产品具有很好的牵伸性能和优异的加工性能。这种产品含有滑爽剂和开口剂。 法规要求： DOW LDPE 582E 聚乙烯树脂应该符合以下法规要求： 美国食品和药物管理局法规 21 CFR 177.1520(c) 2.2 EU, No 10/2011 U.S. FDA-DMF 请查询法规以获取完备的细节资料。 应用领域： - 小份量生鲜食品袋 - 软质物品包装 - 纺织品包装 - 高透明度用途

- A formulated clarity film resin for thin gauge optical packaging - Optimum gauge range: 0.8 - 2.5 mil - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2. - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- A shrink film resin with good optics for packaging applications - Optimum gauge range: 1.0-3.0 mil - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2 - Complies with U.S. FDA-DMF - Complies with Canadian HPFB No Objections(With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

DOW LDPE 621I Resin is a low density polyethylene resin intended for foam and blown film applications requiring high melt strength. - Specialty resin designed for high melt strength applications - Provides excellent bubble stability Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.1 - Canadian HPFB No Objection Consult the regulations for complete details.

DOW™ LDPE 690 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for extrusion blow molding, injection blow molding, and blow-fill seal applications with good flexibility, moderate rigidity and good chemical resistance. It is also suitable for medical packaging films. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21CFR 177.1520 (c) 2.2 - USP Class VI - Drug Master File Listing - Canadian HPFB (No Objections) - EU, No 10/2011 - Consult the regulations for complete details.

DOW™ LDPE 692 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for extrusion blow molding, injection blow molding, and blow-fill seal applications with good flexibility, moderate rigidity and good chemical resistance. It is also suitable for medical packaging films. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21CFR 177.1520 (c) 2.1 - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

LDPE 7010E is a High Speed Extrusion Coating Resin Main Characteristics: - Designed for high speed extrusion coating - Robustness and consistency in melt drawing - Reliable Sealant Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - Consult the regulations for complete details.

DOW 聚乙烯 722 的分子量分布宽，这种均聚物具有良好的抗冲击强度和耐龟裂性能，同时它还具有优异的柔软性。这种树脂的良好加工性能，加工范围广阔。 - 低密度聚乙烯 (LDPE) - 其典型应用包括封盖材料 - 抗冲击强度好，耐环境应力开裂ESCR性能好，同时具有优异的柔软性 - 符合以下法规： -- 加拿大健康产品和食品局(HPFB)的要求：无反对意见(带有限制条件) -- EU, No 10/2011 -- 美国食品和药物管理局法规 21 CFR 177.1520 (c) 2.2 -- 美国食品和药物管理局 药物主文件 (DMF) -- 请查询法规以获取完备的细节资料。

DOW™ LDPE 740E R Low Density Polyethylene Resin has been designed with a specific focus on the compounding industry. DOW™ LDPE 740E R displays good processability, ease of blending, and a controlled, low gel level. The resin is therefore suitable for the production of high quality masterbatches. Main Characteristics: - Designed for compounding - Good blendability - Good processability - Consistently low gel level Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - ISCC PLUS certification for bio-based plastics Consult the regulations for complete details.

DOW™ LDPE 740E REN Low Density Polyethylene Resin has been designed with a specific focus on the compounding industry. DOW™ LDPE 740E REN displays good processability, ease of blending, and a controlled, low gel level. The resin is therefore suitable for the production of high quality masterbatches. Main Characteristics: - Designed for compounding - Good blendability - Good processability - Consistently low gel level Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW™ LDPE 740E Low Density Polyethylene Resin has been designed with a specific focus on the compounding industry. DOW™ LDPE 740E displays good processability, ease of blending, and a controlled, low gel level. The resin is therefore suitable for the production of high quality masterbatches. Main Characteristics: - Designed for compounding - Good blendability - Good processability - Consistently low gel level Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 Consult the regulations for complete details.

- A low density polyethylene for stretching/cling film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1 - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details

DOW LDPE 750E Polyethylene Resin is a low molecular weight, low density compounding grade designed for masterbatch production. The product gives an excellent combination of processability and blendability. Main Characteristics: - Low gel specification. - Excellent processability. - Low power consumption. - Excellent additive retention. - Good oxygen induction time. Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.1 Consult the regulations for complete details.

- A high additive film resin for general packaging applications - For cast film extrusion - A fast blooming resin for high speed bag conversion - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2 - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with Japan Hygienic Olefin and Styrene Plastics Association - Consult the regulations for complete details.

DOW LDPE 770G is Low Density Polyethylene Resin for Food and Industrial Packaging Main Characteristics: - Specially designed for high melt strength applications - Provides excellent bubble or web stability in monolayer, coex or blend configurations - Cast or blown film and extruded sheet Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 Consult the regulations for complete details.

LDPE 780E Low Density Polyethylene Resin can be readily processed using conventional injection moulding techniques utilising melt temperatures between 140 and 250°C, a mould temperature between 10 and 50°C, and injection pressure between 50 and 150 MPa. When properly injection moulded, 780E Low Density Polyethylene Resin exhibit: - Excellent flow - Good rigidity - Good surface gloss Note: LDPE 780E Low Density Polyethylene Resin should comply with FDA regulation 177.1520 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for contact applications. Please, contact your nearest Dow office for food contact compliance statements.The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: - Housewares. - Toys & leisures. - Containers. - Compounding. Complies with Canadian HPFB No Objection Complies with U.S. FDA 21 CFR 177.1520

DOW™ LDPE 91003 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for blow-fill seal, extrusion blow molding, and injection blow molding applications with good flexibility and good chemical resistance. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - USP Class VI - Drug Master File Listing - USP <661.1> - European Pharmacopeia 3.1.3 and 3.1.4 Consult the regulations for complete details.

DOW™ LDPE 91020 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for blow-fill-seal, extrusion blow molding, and injection blow molding applications with good flexibility and good chemical resistance. It is also suitable for medical packaging films. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - USP Class VI - Drug Master File Listing - USP <661.1> - European Pharmacopeia 3.1.3 and 3.1.4 Consult the regulations for complete details.

- Low Density Polyethylene (LDPE) - Typical applications include lids, caps/closures, general purpose - Excellent clarity - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1. - Complies with U.S. FDA -DMF. - Complies with U.S. USP - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW Polyethylene 955I Low Density is a medium molecular weight distribution homopolymer designed to offer excellent clarity and flexibility and good toughness with low warpage. This resin has good processability over a wide range of molding conditions.