DOW DMDA-8962 NT 7 Medium Density Polyethylene (MDPE) resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in thin-wall injection molding applications such as food containers, including freezer applications. This resin has been designed to provide a good impact/stiffness balance as well as excellent processability. Main Characteristics: - Injection molding resin - Good impact/stiffness balance for freezer applications - High flow for processing ease - Very narrow molecular weight distribution Complies with - U.S. FDA 21 CFR 177.1520(c)3.2a - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - EU, No 10/2011 - Consult the regulations for complete details.

- High melt strength - Excellent low temperature toughness - Good environmental stress crack resistance - Excellent flex life Industrial Standards Compliance: - ASTM D 3350: cell classification PE224340A - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details. DOW DNDA-1796 NT 7 Medium Density Polyethylene Resin is produced using UNIPOL™ process technology. It is intended for use in flexible hose and tube applications. It also has utility in certain sheet applications and blow molding applications such as small, squeezable bottles. It exhibits high melt strength, excellent low temperature toughness, good stress cracking resistance, and outstanding flex life. It has a high molecular weight and a relatively broad molecular weight distribution that provides an excellent balance of performance properties and processability.

- High melt strength - Excellent low temperature toughness Industrial Standards Compliance: - ASTM D 3350: cell classification PE224340A - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Complies Europe Commission Regulation (EU) No 10/2011 (See NOTES) - Consult the regulations for complete details. DOW DNDA-7350 NT 7 Medium Density Polyethylene Resin is produced using UNIPOL™ process technology. It is intended for use in flexible hose and tube applications as well as blow molded articles. It exhibits high melt strength and excellent low temperature toughness.

DOW™ DPDA-3135 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: DOW DPDA-3135 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-8 stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - Underwriters Laboratories Inc. - EU, 10/2011 - NSF International NSF/ANSI Std 61 (sec 4 & 5) Consult the regulations for complete details.

DOW™ DPDA-3152 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: DOW DPDA-3152 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-8 stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - Underwriters Laboratories, Inc. - NSF International NSF/ANSI Std 61 (sec 4 & 5) Consult the regulations for complete details.

DOW™ DPDA-3170 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding and is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: DOW DPDA-3170 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-8 stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - Underwriters Laboratories Inc. - NSF International NSF/ANSI Std 61 (sec 4 & 5) - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

DOW™ DPDA-3020 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for use in a broad range of injection molding applications such as household or commercial trash bins, storage units (totes, bins and laundry baskets) and large carts. This resin has been designed to provide an excellent balance of toughness, tear resistance and processability. · Injection Molding · For injection molded household or commercial trash bins, storage units (totes, bins and baskets) and large carts · Excellent balance of toughness, tear resistance and processability Complies with: · U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details

MDPE NG 7525 is a Medium Density Polyethylene Resin produced in the UNIPOL™ Process. This resin is recommended to be used in thin-wall micro-irrigation tape application and profile extrusion application. Resin exhibits good draw down characteristics producing tapes with a reliable balance of extrusion and stiffness. It can also be used as a component in mixtures with low density polyethylene resins and linear low density polyethylene resins, to modify and improve the mechanical properties. Outdoor applications require the addition of UV stabilizer to maintain the excellent properties over extended periods of UV exposure. Main Characteristics: - High performance in processability - Excellent mechanical properties - High ESCR - Excellent seal property in drippers - Complies with Regulation U.S. FDA 21 CFR 177.1520 (c) 3.2a - Complies with EU, No 10/2011 - Consult the regulation for complete details

MPDE NG 6995 is a Medium Density Polyethylene Resin produced in the Gas Phase technology. It is designed for blown film applications providing good processability and seal properties. It offers good tear and impact resistance. Main Characteristics: - Monolayer and multilayer blown film - General purpose bags Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - European Commission Regulation (EU) No 10/2011 Consult the regulation for complete details.

XDPDA-3020 NT 7 Experimental Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for use in a broad range of injection molding applications such as household or commercial trash bins, storage units (totes, bins and laundry baskets) and large carts. This resin has been designed to provide an excellent balance of toughness, tear resistance and processability. · Injection Molding · For injection molded household or commercial trash bins, storage units (totes, bins and baskets) and large carts · Excellent balance of toughness, tear resistance and processability Complies with: · U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details

DOW LDPE™ 132G 低密度聚乙烯树脂可以很容易地采用常用的吹塑薄膜技术进行挤出加工，所采用的熔体温度范围在170 至 230°C。在制备得当时，这种树脂将加工性能、挺度和物理性能很好地结合在一起。这种产品不含滑爽剂，也不含开口剂。 备注： 符合以下法规： 美国食品和药物管理局法规 21 CFR 177.1520(c)2.2 EU, No 10/2011 请查询法规以获取完备的细节资料 应用领域： - 重包装工业用薄膜 - 收缩膜

- A barefoot resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used in shrink film, shipping sacks, construction film and other gauge film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with U.S. FDA-DMF - Consult the regulations for complete details.

- A medium anti-block resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used for thick gauge film applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2. - Canadian HPFB No Objections (With Limitations) - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE™ 150E 低密度聚乙烯树脂可以采用普通的吹塑薄膜工艺进行挤出加工，熔体温度在170 和 230°C之间。制备得当的DOW LDPE 150E 低密度聚乙烯树脂将加工性能、挺度和物理性能较好地综合在一起。 备注： DOW LDPE 150E 低密度聚乙烯应该符合以下法规要求： EU, No 10/2011 美国食品和药物管理局法规 21 CFR 177.1520(c)2.2 美国食品和药物管理局法规-药物主文件 (DMF) 请查询法规以获取完备的细节资料 应用领域： - 重包装工业用薄膜

DOW LDPE 303E Low Density Polyethylene Resin contains no slip or antiblock additives. DOW LDPE 303E Low Density Polyethylene Resin can readily be extruded using the blown film techniques utilising melt temperatures between 160 and 200 ° C. Main Characteristics: - Good draw down (30µm) - Good mechanical properties. - Good optics Applications: - Industrial and semiindustrial shrink films. - Heavy duty bags. - Construction films Complies with: - Canadian HPFB No Objection - U.S. FDA-DMF - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 Consult the regulation for complete details.

DOW LDPE 305E is a fractional melt index low density polyethylene resin designed for blown film extrusion where good optical properties and an excellent balance of physical properties is required. Main Characteristics: - High optical properties - Excellent tensile and tear strength - Excellent shrink properties Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Consult the regulations for complete details.

DOW LDPE 310E R is a fractional melt index low density polyethylene resin. DOW LDPE 310E R has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: - lamination film, shrink film, and stretch film Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE 310E REN is a fractional melt index low density polyethylene resin. DOW LDPE 310E REN blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: - lamination film, shrink film, and stretch film Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE 310E is a fractional melt index low density polyethylene resin. DOW LDPE 310E has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: - lamination film, shrink film, and stretch film Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection Consult the regulations for complete details. Slip Additive: 0 ppm Antiblock Additive: 0 ppm

DOW LDPE 312E R is a fractional melt index low density polyethylene resin, containing slip and antiblock additives. DOW LDPE 312E R has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: Health & hygiene films, Food packaging, Collation shrink, Agricultural films, Shopping bags, Garbage bags, Lamination films Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 (c)2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE 312E REN is a fractional melt index low density polyethylene resin, containing slip and antiblock additives. DOW LDPE 312E REN has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: Health & hygiene films, Food packaging, Collation shrink, Agricultural films, Shopping bags, Garbage bags, Lamination films Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 (c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE 312E 是一种低熔融指数、低密度聚乙烯树脂，含有滑爽剂和开口剂。DOW LDPE 312E具有优异的加工性能，是专为吹塑薄膜加工生产线而研制的，该产品的应用可显著地提高产能。 此外，该树脂还具有优异的牵伸性能。该树脂可单独使用或者与LLDPE树脂共混使用。 应用领域： 健康和卫生用薄膜，食品包装，冷食小吃收缩膜，农用薄膜，购物袋，垃圾袋，复合薄膜 主要特性： - 优异的加工性能和牵伸性能 - 与LLDPE的共混物具有良好的物理性能 - 可以很容易地采用常规的吹塑薄膜技术进行挤出加工，熔体温度范围在160 至 195°C DOW LDPE 312E 应该符合以下法规的要求： - 美国食品和药物管理局法规 21 CFR 177.1520 (c) 2.2 - EU, No 10/2011 - Canadian HPFB No Objection - U.S. FDA-DMF 请查询法规以获取完备的细节资料。 滑爽剂含量：385 ppm 开口剂含量：900 ppm

DOW LDPE 320E 是一种低熔融指数、低密度聚乙烯树脂。DOW LDPE 320E是专为需要高透明度和高光泽度而研制的。其提升的光学性能亦可在LLDPE共混物中见到，在LDPE含量高的结构中就更加明显。由于其牵伸性能优异，使其可以用于某些较薄结构部件的加工。 应用领域： 食品包装、展示性包装、消费品包装用的复合薄膜 主要特性： - 优异的加工性能和牵伸性能 - 用于需要优异的光学性能的应用领域，可单独使用，也可与LLDPE共混使用 DOW LDPE 320E 应该符合以下法规的要求： - 美国食品和药物管理局法规 21 CFR 177.1520 (c) 2.2 - EU, No 10/2011 请查询法规以获取完备的细节资料。 滑爽剂含量：0 ppm 开口剂含量：0 ppm

DOW LDPE 330E 是一种低熔融指数、低密度的聚乙烯树脂。DOW LDPE 330E是专为保护性薄膜而研制的，这种薄膜需要较高的光学性能和非常低的晶点 主要特性： - 光学性能高 - 晶点水平很低 - 优异的拉伸强度和抗撕裂强度 - 优异的收缩性能 - 符合以下法规： 美国食品和药物管理局法规 21 CFR 177.1520(c)2.2 EU, No 10/2011 请查询法规以获取完备的细节资料。 滑爽剂含量：0 ppm 开口剂含量：0 ppm

DOW LDPE 352E R Low Density Polyethylene Resin is a high clarity resin designed for clarity over wrap applications. This resin does contain erucamide slip and antiblock additives. It can be readily extruded using conventional blown film techniques utilising melt temperatures between 160 and 175 °C. This resin when properly fabricated exhibits: - Excellent processability and draw drown. - Outstanding toughness and impact properties. - Superior optical properties. - Excellent tensile and tear strength. Applications: - Light-produce bags - Soft goods packaging - Textile packaging - Good optical general purpose bags - Hygiene films - Food packaging films Complies with: - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE 352E REN Low Density Polyethylene Resin is a high clarity resin designed for clarity over wrap applications. This resin does contain erucamide slip and antiblock additives. It can be readily extruded using conventional blown film techniques utilising melt temperatures between 160 and 175 °C. This resin when properly fabricated exhibits: - Excellent processability and draw drown. - Outstanding toughness and impact properties. - Superior optical properties. - Excellent tensile and tear strength. Applications: - Light-produce bags - Soft goods packaging - Textile packaging - Good optical general purpose bags - Hygiene films - Food packaging films Complies with: - U.S. FDA 21 CFR 177.1520 (c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE 352E Low Density Polyethylene Resin is a high clarity resin designed for clarity over wrap applications. This resin does contain erucamide slip and antiblock additives. It can be readily extruded using conventional blown film techniques utilising melt temperatures between 160 and 175 °C. This resin when properly fabricated exhibits: - Excellent processability and draw drown. - Outstanding toughness and impact properties. - Superior optical properties. - Excellent tensile and tear strength. Applications: - Light-produce bags. - Soft goods packaging. - Textile packaging. - Good optical general purpose bags. - Hygiene films. - Food packaging films. Complies with: - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 Consult the regulations for complete details.

Dow Polyethylene LDPE 4010 is a general purpose Extrusion Coating Resin. It complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - European Commission Regulation (EU) No 10/2011. Consult regulations for complete details.

- A high melt index resin for thin coating applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2. - Complies with U.S. FDA-DMF - Complies with Canadian HPFB No Objection ( With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details. Polyethylene 4012 is used for a variety of applications such as condiment packaging, dry foods packaging, snack foods packaging, moist foods packaging, sugar pouches, lidding stock and medical packaging. DOW LDPE extrusion coating resins provide optimal neck-in and draw-down performance with minimal taste/odor contribution.

- A high melt index resin for high speed thin coating applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1. - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details. Polyethylene 4016 can be used for a variety of applications such as condiment packaging, dry foods packaging, snack foods packaging, moist foods packaging, sugar pouches, lidding stock and medical packaging.