HFDK-4201 NT is an unfilled, crosslinkable, low density polyethylene insulation compound designed for medium voltage power cable insulation applications. HFDK-4201 NT has been designed to have a low level of additive bloom for a long storage life, low dusting and an enhanced degree of scorch retardance. HFDK-4201 NT is suitable for the insulation of power distribution cables rated up to 46 kV. Specifications HFDK-4201 NT is designed for use in power distribution cables. Cables insulated with HFDK-4201 NT, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - CENELEC HD 620 S2 - IEC 60502, 60840 - GB/T 12706 - BSI BS 6622, 7870-4

HYPERTHERM -2399 NT BIMODAL POLYETHYLENE Resin is a Polyethylene resin with raised temperature capability produced using UNIPOL II process technology. This product is intended for use in piping systems where high temperatures and aggressive oxidation conditions exist. Suitable applications include hot and cold potable water. Industrial Standards Compliance: ASTM D 3350: cell classification PE445574A Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - HYPERTHERM 2399 NT BIMODAL POLYETHYLENE Resin -- ASTM PE4710 pipe grade - 1600psi HDB @ 23°C -- ASTM PE4710 pipe grade - 800psi HDB @ 82.2°C NSF International - Natural Pipe - HYPERTHERM 2399 NT BIMODAL POLYETHYLENE Resin -- Standard 14 and 61 Meets requirements of - ASTM F2769, F2623, & F1281

INNATE ST 30 Precision Packaging Resin is designed for excellent balance of stiffness and mechanical performance like tear resistance and dart impact resistance. Complies with: - Europe Commission Regulation (EU) No 10/2011 (See NOTES) - U.S. FDA 21 CFR 177.1520(c )3.2a Consult the regulations for complete details.

INNATE™ ST100 Precision Packaging Resin is designed for exceptional abuse performance at a medium density. It offers a unique combination of high stiffness with excellent toughness which enables new performance levels for all polyethylene flexible packaging. This product also delivers potential for downgauging, and it is easy to process at typical blown film lines. Complies with: • U.S. FDA 21 CFR 177.1520(c )3.2a • European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details

INNATE™ ST50 Precision Packaging Resin is designed for exceptional abuse performance. It offers a unique combination of high stiffness with excellent toughness which enables excellent performance on automated packaging equipment. This product also delivers robust processability. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details

INNATE ST51 Precision Packaging Resin is designed for exceptional abuse performance. It offers a unique combination of high stiffness with excellent toughness which enables excellent performance on automated packaging equipment. This product also delivers robust processability. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520(c )3.2a Consult the regulations for complete details.

INNATE™ ST70 Precision Packaging Resin is designed for excellent balance of stiffness and mechanical performance like tear resistance and dart impact resistance. Complies with: - Europe Commission Regulation (EU) No 10/2011 (See NOTES) - U.S. FDA 21 CFR 177.1520(c )3.2a Consult the regulations for complete details.

INNATE™ ST90 Precision Packaging Resin is designed for exceptional abuse performance , with an unprecedent dart impact resistance. It offers a unique combination of high stiffness with excellent toughness which enables excellent performance in industrial film and packaging applications. This product also delivers robust processability. Complies with: - U.S. FDA FCN 424 Consult the regulations for complete details

- Blown and cast extrusion process. Monolayer and co-extrusion film for packaging applications. - Critical for BOPE application. Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

INNATE™ TH60 Precision Packaging Resin is designed for exceptional toughness in combination with sealing performance while also delivering robust processability. It has exceptional low-temperature toughness and flex-crack resistance, making it a versatile resin that can meet the needs of demanding end-use applications. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INTREPID™ 2498 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is intended for use in industrial piping system where extreme conditions such as high pressures, elevated temperatures and aggressive chemicals or hydrocarbons exist. Suitable uses include oil & gas field pipelines, gas distribution pipelines, and other industrial applications. Industrial Standards Compliance: ASTM D 3350: cell classification - Black - PE445576C (MRS) (See NOTES 1) - Black - PE445574C (HDB) (See NOTES 1) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - INTREPID 2498 BK (See NOTES 1) -- ISO PE100 pipe grade - MRS 10 @ 20°C -- ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F NOTES: (1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).

INTREPID™ 2498 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is intended for use in industrial piping system where extreme conditions such as high pressures, elevated temperatures and aggressive chemicals or hydrocarbons exist. Suitable uses include oil & gas field pipelines, gas distribution pipelines, and other industrial applications. Industrial Standards Compliance: ASTM D 3350: cell classification - Black - PE445576C (MRS) (See NOTES 1) - Black - PE445574C (HDB) (See NOTES 1) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - INTREPID 2498 BK (See NOTES 1) -- ISO PE100 pipe grade - MRS 10 @ 20°C; -- ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F NOTES: (1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).

INTREPID™ 2499 NT Bimodal Polyethylene Resin is a Polyethylene resin produced with raised temperature capability (PE-RT) using UNIPOL™ II process technology. This product is intended for use in municipal and industrial piping systems where extreme conditions such as high temperatures, aggressive chemicals, hydrocarbons, or highly oxidative conditions exist. Suitable uses include oil and gas field pipelines, gas distribution pipelines, mining pipelines, district heating systems, municipal water distribution and other industrial applications. Industrial Standards Compliance: ASTM D3350: cell classification: -- Natural - PE445574A CCO -- Black - PE445574C CC3 (See Notes A and B) Plastics Pipe Institute (PPI): TR-4 -- Natural Pipe INTREPID 2499 NT Bimodal Polyethylene Resin -- ASTM PE4710 pipe grade - 1600psi HDB @ 73 °F (23°C) -- ASTM PE4710 pipe grade - 800psi HDB @ 180 °F (82.2°C) -- Black Pipe INTREPID 2499 BK Bimodal Polyethylene Resin (See Note B) -- ASTM PE4710 pipe grade - 1600psi HDB @ 73 °F (23°C) -- ASTM PE4710 pipe grade - 800psi HDB @ 180 °F (82.2°C) NSF International: Standard 14 and 61 -- Natural Pipe INTREPID 2499 NT -- Black Pipe INTREPID 2499 BK (See Note B) NOTES: (A)The first 5 numbers of the cell classification are based on natural resin. The last number and letter are based on black resin. (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 BK (6.5%)

REDI-LINK PE 是一种双组份的湿致固化、可交联体系，用于低压电力电缆。DFDA-5440 Natural的密度为0.922，在与密度为0.921的DFDA-5430 Natural催化剂母料按照50：50的比例混配，一同挤出之后, 在水分扩散进入绝缘材料的情况下可能发生交联反应。如果需要黑色电缆，则建议将DFDB-5410 Black 55炭黑母料加入DFDA-5430 Natural 和 DFDA-5440 Natural。 由于DFDA-5430 Natural 是与DFDA-5440 Natural分别运输的，所以其组分在保质期内非常稳定。只有在这些组分的熔体进行混配并接触水分的时候才能发生交联反应。 规格： 当DFDA-5440 Natural 使用DFDA-5430 Natural 进行交联，或者选用DFDB-5410 Black 55进行交联时，其产品一般均可满足以下低压电缆的规格要求： - IEC-60502 - GB 12706-91 - IS 7098 - 1988

REDI-LINK™ PE is a two component moisture curable crosslinkable system for use in low voltage power cable applications. DFDA-5440 Natural, with a density of 0.922, may be crosslinked after extruding with the DFDA-5430 Natural catalyst masterbatch, with a density of 0.921, in a 50:50 ratio and then allowing moisture to diffuse into the insulation. If a black product is required, the addition of DFDB-5410 Black 55 carbon black masterbatch to DFDA-5430 Natural and DFDA-5440 Natural is recommended. Specifications: When DFDA-5440 Natural is crosslinked with DFDA-5430 Natural and optionally, DFDB-5410 Black 55, it meets typical low voltage specifications such as those found in: - IEC-60502 - GB 12706-91 - IS 7098 - 1988

RESILITY™ DPDB-3135 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: RESILITY™ DPDB-3135 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-20+ stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a (with restrictions) - European Commission Regulation (EU) No 10/2011 - REACH - NSF51 and NSF 61 - UL94 HB, UL746C f1 - FMVSS 302 Consult the regulations for complete details.

RESILITY™ DPDB-3152 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: RESILITY™ DPDB-3152 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-20+ stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a (with restrictions) - European Commission Regulation (EU) No 10/2011 - REACH - NSF51 and NSF 61 - UL94 HB, UL746C f1 Consult the regulations for complete details.

RESILITY™ DPDB-3162 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: RESILITY™ DPDB-3162 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-20+ stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a (with restrictions) - European Commission Regulation (EU) No 10/2011 - REACH - NSF51 and NSF 61 - UL94 HB, UL746C f1 Consult the regulations for complete details.

RESILITY™ DPDB-3170 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for rotational and injection molding and is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: RESILITY™ DPDB-3170 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-20+ stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a (with restrictions) - EU No 10/2011 - REACH - NSF51 and NSF 61 - UL94 HB, UL746C f1 - FMVSS 302 Consult the regulations for complete details.

RESILITY™ DPDB-3220 NT 7 High Density Polyethylene Resin is produced via UNIPOLTM Process Technology from Dow and is intended for rotational and injection molding is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: RESILITY™ DPDB-3220 NT 7 High Density Polyethylene Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For Large Agricultural Tanks, Intermediate Bulk Containers, Potable Water, Chemical Tanks and Industrial Products - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-20+ stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a (with restrictions) - European Commission Regulation (EU) No 10/2011 - REACH - NSF51 and NSF 61 - UL94 HB, UL746C f1 Consult the regulations for complete details.

REVOLOOP™ 70-LD NA recycled plastics resin is a PCR-rich LDPE resin for film applications that require improved homogeneity and consistency over other film-based PCR resin offerings. REVOLOOP™ 70-LD NA recycled plastics resin is designed with 70% recycled content for use in shrink film and other secondary and tertiary film applications.*

REVOLOOP™ 70-LL NA recycled plastics resin is a PCR-rich LLDPE resin for film applications that require improved homogeneity, consistency and toughness over other film-based PCR resin offerings. REVOLOOP™ 70-LL NA recycled plastics resin is a PCR-rich solution is designed with 70% recycled content for use in secondary and tertiary packaging and potential use in some non-food contact primary packaging applications.*

DFDA-5488 NT 是一种与DFDB-5451 NT乙烯-硅烷共聚物配套使用的、可快速固化的催化剂母料。DFDA-5488 NT 的配方中含有EEA 共聚物，而且不久将推出牌号为SI-LINK™ AC DFDA-5488 Natural 的可交联聚乙烯。 由于催化剂母料是与硅烷改性聚乙烯分别运输的，所以这些组分在保质期内非常稳定。只有在这两个组分熔融混配之后在接触湿分和一定的温度条件下才可发生交联反应。在与DFDB-5451 NT混配之后，DFDA-5488 NT具有优异的抗焦烧性能。 DFDA-5488 NT具有足够的抗氧剂含量，因此，这种混配体系具有令人满意的加工性能和产品性能稳定性。这种体系对于铜导管或者铝导管都非常有效。 DFDA-5488 NT的推荐使用量大约为5% （重量比）。具体的用量水平取决于工艺和所采用加工条件。请就您的具体应用，联络您的陶氏销售代表或者技术代表以确定用量水平。

可交联、硅烷-乙烯共聚物，用于电力电缆绝缘材料 DFDB-5451 NT 是一种开发性的硅烷-乙烯共聚物，用于低于1kV的电力电缆和控制电缆的制造。DFDB-5451 NT 不久将上市销售，牌号为SI-LINK™ AC DFDB-5451 Natural 可交联聚乙烯。在与DFDA-5488 NT催化剂母料一同挤出，湿分扩散进入体系之后，DFDB-5451 NT可发生交联反应。如果需要黑色产品，建议将DFDB-5410 BK炭黑母料加入DFDB-5451 NT 和 DFDA-5488 NT。 由于催化剂母料和炭黑母料与DFDB-5451 NT是分别运输，所以各组分在保质期内均非常稳定。只有在组分的熔体混配并接触湿分和高温的条件下才能使整个体系发生交联反应。 规格 当使用DFDA-5488 NT与DFDB-5451 NT进行交联，或者选用DFDB-5410 BK与之交联时，其产品应该满足以下规格要求中对1kV以下低压电缆的要求： - UL: 854 - ICEA: S-66-524 - CSA: RW90 - IEC: 60502-1

DFDA-5445 BK 是一种阻燃的、炭黑填充的母料，与SI-LINK® PE 配套使用，用于需要满足UL-44 水平燃烧测试要求的大型电缆。这种产品可以在更粗的电缆上通过水平燃烧XHHW-2的要求。 规格 DFDA-5445 BK按照35%的比例与60% 的SI-LINK 可交联聚乙烯DFDA-5451 NT 和 5% 的DFDB-5480 NT 催化剂母料一同使用，用于2 AWG 或者更粗的导管。在这种比例时，UL-44 和UL-1571所规定的XHHW-2, RHW-2 和 RHH电缆规格以及UL-854 和 UL-1581所规定的地下进户线缆(USE-2)规格中要求的性能均可满足，这包括阻燃性能。DFDA-5445 BK浓度加大时，即使细至6 AWG 的线缆亦可满足水平燃烧测试要求。 DFDA-5445 BK 是一种高填充的、黑色阻燃母料，用于添加进标准的SI-LINK PE 挤出树脂 (DFDA-5451) 和催化剂(DFDB-5480) 湿致固化体系。DFDA-5445 BK 的柔软性使加入该组分的配方产品在多种线缆规格上均可满足水平燃烧测试的要求。一般情况下，添加了55% DFDA-5445 BK就可使细至 6 AWG的线缆通过水平燃烧测试；35%的添加量可以使细至2 AWG的线缆通过水平燃烧测试。可以根据所作制造的电缆规格和所选取的UL送样规格对配方进行优化以降低成本。诸如加工条件、固化程度和导管类型等因素均可能影响产品性能，所以必须由电缆制造商来决定其产品的最有配方。

SI-LINK™ 可交联聚乙烯DFDA-5451 NT是一种乙烯-硅烷共聚物，用于1 kV以下的电力电缆和控制电缆。 DFDA-5451 NT 在加入了DFDB-5480 NT催化剂母料后进行电缆的挤出之后可以发生湿致交联。如果为了防紫外线，需要黑色线缆，则建议添加DFDB-5410 BK 炭黑母料。 由于催化剂和炭黑母料是与DFDA-5451 NT 共聚物分别运输的，所以这些组分在保质期内非常稳定。只有在各组分熔融混配之后接触湿分的条件下才可发生交联反应。 规格 当使用DFDB-5480 NT，或者选用DFDB-5410 BK进行交联后，DFDA-5451 NT 的产品一般都可以满足以下标准中对不高于1 kV 电压的电缆要求： - UL 854 - ICEA：S-66-524 - 加拿大标准协会(CSA) RW90 - IEC：60502-1

用于SI-LINK聚乙烯材料的催化剂母料 DFDA-5481 Natural 是一种催化剂母料，用于更快速的固化。该产品与诸如SI-LINK™ 聚乙烯DFDA-5451 Natural之类的硅烷改性聚乙烯一同使用，以便催化材料的交联反应。由于催化剂母料是与硅烷改性聚乙烯分别运输的，所以这些组分在保质期内非常稳定。只有这两种组分在熔融混配之后才会发生交联反应。 在与DFDA-5451 Natural混配之后，DFDA-5481 Natural 具有优异的抗焦烧性能，DFDA-5481 Natural具有足够的抗氧剂含量，因此，这种双组份体系具有令人满意的加工性能和产品性能稳定性。这种双组份体系对于铜导管或者铝导管都非常有效。 DFDA-5481 Natural 的推荐使用量大约为5% （重量比）。具体的用量水平取决于工艺和所采用加工条件。请就您的具体应用，联络您的陶氏销售代表或者技术代表以确定用量水平。

SI-LINK 可交联聚乙烯：电力电缆绝缘材料 SI-LINK™ 可交联聚乙烯DFDA-6451 Natural 的密度为0.922，熔融指数为1.5，是一种硅烷-乙烯共聚物，应用于中等电压的电力电缆。在与DFDB-5480 Natural催化剂母料共挤出之后，DFDA-6451 Natural 在湿分扩散进绝缘材料之后可发生交联反应。 规格 SI-Link DFDA-6451 NT / SI-Link DFDB 5480 配套使用可作为XLPE中压电缆的绝缘材料。当采用可靠的挤出和交联工艺进行加工时，DFDA-6451 NT/DFDB 5480 NT能够满足IEC 60502中规定的对中压电缆的一般性要求。

SI-LINK™ DFDB-5400 NT is a RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5425 and is moisture curable. The specific gravity of the system is 1.04. It is recommended for use in low voltage power cable and industrial cable applications. SI-LINK™ DFDB-5400 NT is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030 in. insulation wall thickness, at a 25% loading with 70% SI-LINK™ DFDA-5451 NT and 5% SI-LINK™ DFDB-5480 NT. UV resistance allowing the wire to be printed "SunRes" may be achieved with the addition of a UV stabilizer package. The formulation for such an additive is available upon request and the resulting product is bulletinized by UL as DFDB-5425 UV. For accelerated curing applications SI-LINK™ DFDB-5400 NT can be used in conjunction with SI-LINK™ AC DFDB-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ AC DFDA-5488 NT Polyethylene to form a flame retardant SI-LINK™ AC polyethylene insulation system. This system is recognized by UL as DFDB-5425 AC. It is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030" wall thickness, at a 25% loading with 70% SI-LINK™ DFDB-5451 NT and 5% SI-LINK™ AC DFDA-5488 NT. SPECIFICATIONS The DFDB-5425 systems are bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2. They are also suitable for CSA RW-90, and RWU-90 applications.

DFDB-5410 Black 是一种与SI-LINK™ PE配套使用的、炭黑填充的母料。这种炭黑母料专门用于需要优异的防紫外线功能以及需要将湿分吸收降低至最低水平的应用领域。 优点： 在应用于SI-LINK聚乙烯绝缘材料体系的时候，DFDB-5410 BK 具有优异的处理性和加工性能。 - 与加工商研讨配方，以减少用量 规格： 在与SI-LINK PE可交联聚乙烯一同使用的时候，DFDB-5410 Black中的炭黑具有防紫外线的功用。为了在制品中达成2.5% 的炭黑含量，DFDB-5410 Black的加入量应该在6.3%。 加工技术： 炭黑的高用量填充使得体系具有了固有的吸湿性，经过一段时间就会开始吸收湿分。尽管DFDB-5410 Black的包装已经经过了特殊设计亦减少湿分的渗入，为了达成最佳质量，建议将物料放置在料斗干燥期内，使用除湿空气，在140°-160°F (60°-70°C)下干燥4至6个小时。如有需要，可在进行干燥之前，将其与陶氏的DFDB-5480 Natural催化剂母料进行混配。

SI-LINK™ DFDB-5445 BK is a RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5445 BK and is moisture curable. The specific gravity of the system is 1.02. It is recommended for use in low voltage power cable and industrial cable applications. It is formulated to pass the UL-44 horizontal burn test on larger cables. SI-LINK™ DFDB-5445 BK, a highly filled black flame retardant master-batch, is intended to be used at a 35% concentration along with 60% SI-LINK Polyethylene DFDA-5451 NT and 5% SI-LINK DFDB-5480 NT Catalyst Master-batch on size #2 AWG conductors and larger. At this concentration the requirements for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 cables as defined by UL-44, UL-854 are satisfied. . SI-LINK™ DFDB-5445 BK offers flexibility in tailoring the formulation to meet the horizontal burn requirement on a range of cable sizes. At increased concentrations, SI-LINK™ DFDB-5445 BK has been shown to provide horizontal burn test compliance in smaller sizes. The economics of the formulation may be optimized for a particular application depending on the cable sizes produced and the UL submittal sizes selected. Such factors as processing conditions, degree of cure and type of conductor can affect the results, so cable manufacturers must determine the optimal formulations for their applications. Recommendations are available upon request. SPECIFICATIONS The SI-LINK™ DFDB-5445 BK system is bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 on sizes 2 AWG and larger. It is suitable for CSA RW-90, and RWU-90 applications.

催化剂母料，用于SI-LINK聚乙烯材料 DFDB-5480 NT 是一种催化剂母料，与诸如Dow SI-LINK™聚乙烯DFDA-5451 NT在内的可湿致交联的乙烯-硅烷共聚物一同使用以提供交联反应所需要的催化剂。由于催化剂母料是与乙烯-硅烷共聚物分别运输的，所以这些组分在保质期内非常稳定。只有这两种绝缘材料组分在熔融混配，接触湿分之后才会发生交联反应。 DFDB-5480 NT 具有足够的抗氧剂含量，因此，这种绝缘材料体系具有优异的加工性能和产品性能。这种绝缘材料体系对于铜导管或者铝导管都非常有效。 DFDB-5480 NT 的推荐使用量大约为5% （重量比）。具体的用量水平取决于工艺和所采用加工条件。请就您的具体应用，联络您的陶氏销售代表或者技术代表以确定用量水平。

TUFLIN™ HS-7001 NT 7 线性低密度聚乙烯树脂是一种抗氧剂改性的乙烯-己烯共聚物树脂，用于流延挤出。该树脂以粒料形式供货。采用HS-7001 NT 7 制备的薄膜透明度高、拉伸强度高、伸长率高、抗刺穿强度好。该树脂具有优异的牵伸性能。 主要特性： - 适用于流延薄膜的加工，包括拉伸膜和自粘膜 - 透明度高 - 韧性优异 - 符合美国食品和药物管理局法规21 CFR 177.1520(c) 3.1a的要求 - 请查询法规以获取完备的细节资料。

TUFLIN™ HS-7028 NT 7 Linear Low Density Polyethylene Resin is an ethylene-hexene copolymer, linear low density (LLDPE) resin designed for good strength and processability. This product is recommended for general purpose packaging applications from thick gauge, heavy duty bags to high speed thin gauge applications - Hexene Linear Low Density Resin - General Purpose Resin - Excellent Strength - An additive present in this product limits use only in film form for food contact applications. Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a (with Restrictions) - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

- Hexene Linear Low Density Resin - Good Strength and Stiffness - Complies with U.S. FDA 21 177.1520 (c) 3.2a - Consult the regulations for complete details. TUFLIN™ HS-7066 NT 7 Linear Low Density Polyethylene Resin is a fractional melt, ethylene-hexene copolymer, linear low density (LLDPE) resin designed for good toughness and stiffness. This product is recommended for thin and thick gauge applications such as consumer trash bags and industrial heavy-duty shipping sacks that require strength and machinability.

TUFLIN™ HS-7094 NT 7 Linear Low Density Polyethylene Resin is a fractional melt, ethylene-hexene copolymer, linear low density (LLDPE) resin designed for good toughness and stiffness. This product is recommended for thin and thick gauge applications such as trash bags and heavy-duty shipping sacks that require strength and output. - Hexene Linear Low Density Resin - Good Strength and Stiffness - Good Processability at Narrow Die Gaps - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a - Consult the regulations for complete details.

TUFLIN™ HS-7098C NT 7 is an ethylene-hexene copolymer, linear low density polyethylene (LLDPE) resin designed for cast and blown film applications such as trash bags, industrial can liners, and retail bags. Films extruded with HS-7098C NT 7 exhibit superb toughness, high tensile strength and elongation, excellent tear and puncture resistance, and are readily heat sealable. Main Characteristics: - Hexene Linear Low Density Resin - High strength - Excellent toughness - Complies with U.S. FDA 21 CFR 177.1520(c)3.1a (with Restrictions). An additive present in this product limits use only in film form for food contact applications. Application: - Heavy Duty Industrial and Consumer Liners

TUFLIN™ HS-7098D NT 7 is an ethylene-hexene copolymer, linear low density polyethylene (LLDPE) resin designed for cast and blown film applications such as trash bags, industrial can liners, and retail bags. Films extruded with HS-7098D NT 7 exhibit superb toughness, high tensile strength and elongation, excellent tear and puncture resistance, and are readily heat sealable. Main Characteristics: - Hexene Linear Low Density Resin - High strength - Excellent toughness Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a (with Restrictions). An additive present in this product limits use only in film form for food contact applications. Application: - Heavy Duty Industrial and Consumer Liners

TUFLIN™ HS-7098E NT 7 is an ethylene-hexene copolymer, linear low density polyethylene (LLDPE) resin designed for cast and blown film applications such as protective packaging, trash bags, industrial can liners, and retail bags. Films extruded with HS-7098E NT 7 exhibit superb toughness, high tensile strength and elongation, excellent tear and puncture resistance, and are readily heat sealable. Main Characteristics: - Hexene Linear Low Density Resin - High strength - Excellent toughness Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a (with Restrictions). An additive present in this product limits use only in film form for food contact applications. - Europe Commission Regulation (EU) No 10/2011 Application: - Heavy Duty Industrial and Consumer Liners

TUFLIN™ HS-7098F NT 7 is an ethylene-hexene copolymer, linear low density polyethylene (LLDPE) resin designed for cast and blown film applications such as trash bags, industrial can liners, and retail bags. Films extruded with HS-7098F NT 7 exhibit superb toughness, high tensile strength and elongation, excellent tear and puncture resistance, and are readily heat sealable. Main Characteristics: - Hexene Linear Low Density Resin - High strength - Excellent toughness Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a (with Restrictions). An additive present in this product limits use only in film form for food contact applications. Application: - Heavy Duty Industrial and Consumer Liners