REPSOL ISPLEN ETV 70AW is a polypropylene homopolymer, 20% mineral fillers reinforced and high melt flow rate. It gives a high stiffness, and a low warpage and shrinkage behaviour. This product is high UV stabilised. Applications - Automotive: exterior parts - Technical pieces, in general. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN P3D630FV is a high fluidity polypropylene specially designed for 3D printing FFF and FGF technologies. It contains fiber glass as a reinforced compound. It shows a very high stiffness, keeping good impact strength at every range of temperatures. It also shows a low warpage and shrinkage behaviour. This product is UV stabilised. Recyclable. Applications REPSOL ISPLEN P3D820FM is specifically indicated for 3D Printing, either processed as filament or used directly as pellets, where the main requirement is high mechanical strength together with excellent processability and stability of the constructed part, such as: - Automotive: prototypes, aesthetic parts, specific tools or tools, etc. - Aerospace: prototypes. - Technical components: toys, textiles, footwear, jewelry, leisure, etc. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN P3D720FV is a high fluidity polypropylene specially designed for 3D printing FFF and FGF technologies. It contains fiber glass as a reinforced compound. It shows a very high stiffness, keeping good impact strength at every range of temperatures. It also shows a low warpage and shrinkage behaviour. This product is UV stabilised. Recyclable. Applications REPSOL ISPLEN P3D720FV is specifically indicated for 3D Printing, either processed as filament or used directly as pellets, where the main requirement is high mechanical strength together with excellent processability and stability of the constructed part, such as: • Automotive: prototypes, aesthetic parts, specific tools or tools, etc. • Aerospace: prototypes. • Technical components: toys, textiles, footwear, jewelry, leisure, etc. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN P3D800F is a medium fluidity polypropylene with an excellent impact resistance, specially designed for the FFF and FGF technologies. It is nucleated and contains a special antistatic formulation that provides an outstanding demoulding performance. Recyclable. Applications REPSOL ISPLEN P3D800F is specifically indicated for 3D Printing, either processed as filament or used directly as pellets, where the main requirement is high mechanical strength together with excellent processability and stability of the constructed part, such as: - Automotive: prototypes, aesthetic parts, specific tools or tools, etc. - Aerospace: prototypes. - Technical components: toys, textiles, footwear, jewelry, leisure, etc. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN P3D800FG is a medium fluidity polypropylene with an excellent impact resistance, specially designed for the FFF and FGF technologies for its excellent processability. Recyclable. Applications REPSOL ISPLEN P3D800FG is specifically indicated for 3D Printing, either processed as filament or used directly as pellets, where the main requirement is high mechanical strength together with excellent processability and stability of the constructed part, such as: - Automotive: prototypes, aesthetic parts, specific tools or tools, etc. - Aerospace: prototypes. - Technical components: toys, textiles, footwear, jewelry, leisure, etc. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN P3D820FM is a copolymer which contains mineral load and high processability, with high fluidity specially designed for the FFF and FGF technologies. Recyclable. Applications REPSOL ISPLEN P3D820FM is specifically indicated for 3D Printing, either processed as filament or used directly as pellets, where the main requirement is high mechanical strength together with excellent processability and stability of the constructed part, such as: - Automotive: prototypes, aesthetic parts, specific tools or tools, etc. - Aerospace: prototypes. - Technical components: toys, textiles, footwear, jewelry, leisure, etc. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN PB110H2E is a high melt viscosity propylene heterophasic copolymer with a reinforced formulation designed for extrusion process. Due to their good flow and outstanding mechanical properties it is suitable to be processed into pipes and its good flexural modulus is specially intended for extrusion of doubled corrugated drainage and sewage pipes The grade REPSOL ISPLEN PB110H2E characterized by high impact strength at low temperatures and stress cracking resistance assure the good performance of this material under critical conditions. It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. Applications - Structured doubled wall pipes for underground drainage and sewage without pressure. - Corrugated pipes in general. Recommended melt temperature range from 205-225 ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB120G1F is a phthalate free heterophasic copolymer with low fluidity, especially designed for extrusion applications where excellent mechanical properties are required, for instance for monoaxial oriented tapes with high stiffness. It can also be used for both cast and blown film with outstanding impact resistance. Applications Due to its good mechanical properties, REPSOL ISPLEN PB120G1F is suitable for extrusion and blow-moulding processes, such as: • Monoaxial oriented film. Adhesive Tapes. • Blown Film and Extrusion Blow molding • Lamination films and co-extrusion. • Boards and sheets Recommended melt temperatures range between 190 and 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB130G1F is a phthalate free heterophasic copolymer designed for extrusion applications. It includes thermal stabilisers to protect the polymer during processing and handling. It offers optical processability and high impact strength, even at low temperatures. Applications Due to its optimal balance of properties the grade REPSOL ISPLEN PB130G1F is especially suited for applications that require excellent mechanical properties, such as: • Films with excellent tear resistance and impact strength for special applications • Sheets and profiles • Pipes • Blow-moulding Recommended melt temperatures range between 190 and 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB130G1M is a phthalate free heterophasic copolymer with high molecular weight. It is designed for injection moulding applications, where extremely high impact, even at low temperatures, is necessary in addition with good processability. Among other technical advantages, it offers: - Production of articles with extra high toughness as a main requirement. - Good stiffness. - Because of its better stackability and stress cracking resistance, it can replace HDPE. Applications REPSOL ISPLEN PB130G1M is particularly intended for articles which primary requirement is very high toughness: industrial handling or packaging, houseware and garden containers, luggage, toolboxes, professional organizers and maintenance systems, pallets, crates and disposal containers. Also is suitable for technical components: toys, sports (bikes or sky equipment), leisure goods, automotive, fittings for pressure/non pressure pipes, parts of domestic appliances, use in cable compounds. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB130G809 is a heterophasic copolymer with high molecular weight designed for injection moulding applications where high impact (even at low temperatures) is necessary in addition with moderate processability. This material contains carbon black as UV stabilization. Applications • Automotive: Profiles. • Technical pieces, in general. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN PB131N5E is a nucleated phthalate free heterophasic copolymer with medium-flow fluidity designed for extrusion applications. It has good processability and high mechanical properties especially high impact strength, even at low temperatures. Due to its melt flow properties, high impact strength and excellent ESCR, it is suitable for profiles and pipes requiring excellent mechanical properties. Applications In extrusion and blow-moulding processes, such as: • Films with excellent tear resistance and impact strength for special applications • Sheets and profiles • Pipes • Thermoforming Recommended melt temperatures range between 190 and 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB140G1F is a phthalate free heterophasic copolymer designed for extrusion applications. It offers good processability and good impact-stiffness balance. Applications • Flat, alveolar and corrugated sheet. • Film and thermoforming sheet. • Injection-blown moulding. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB140G2M is a phthalate free heterophasic copolymer with medium-low fluidity. It is designed for injection moulding applications where very high impact properties, even at low temperatures, is necessary combined, with good procesability. Among other technical advantages, it offers: - Production of items exposed to heavy loads that needs high toughness. - Good flow properties enable to fill complex moulds. - It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. Applications Due to its excellent balance of properties some of the major applications of REPSOL ISPLEN PB140G2M are consumer goods as industrial handling or packaging containers, housewares and indoor furniture, suitcases and boxes with living hinge (i.e. tool boxes). Also is suitable for technical components: toys, sports equipment, leisure goods, automotive, pallets, crates and pails, use in cable compounds, general purposes pipe. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB150G1F is a free phthalate medium fluidity heterophasic ethylene-propylene copolymer characterised by its good balance of properties: excellent impact strength, even at low temperatures, good stiffness, low gel level, good clarity films and easy processability in film cast extrusion lines. Applications Non oriented film extrusion processes, cast or tubular quench: • Single layer films • Core-layer in co-extruded cast films • Packaging of foodstuffs and non-food stuffs • Stationery packaging Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB150G2M is a phthalate free medium fluidity heterophasic copolymer, characterised by its good balance of properties: excellent impact strength, even at low temperatures, good stiffness and easy processability. Due to its excellent flow properties is very suitable to fill complex or large moulds with long flow paths. Applications The particular characteristics of REPSOL ISPLEN PB150G2M offer a multi-purpose grade used for packaging and in a wide variety of appliance industries. Typical applications are: - Crates, containers, pails and buckets for domestic and industrial uses. - Tool boxes and organizers with integral hinge. - Battery boxes and other automotive components. - Appliance industries: stadium seats, flooring slats, farm equipments, toys, sports... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB151U5M is a phthalate free low-medium fluidity heterophasic copolymer with specific structural modifications. It is intended for injection moulding applications that combines very high impact strength, even at low temperatures, and high stiffness and good processability. It is UV stabilized to be used in exterior applications. Among other technical advantages REPSOL ISPLEN PB151U5M offers: - Highly suitable for manufacturing of articles with outstanding strength and impact resistance balance even at very low temperatures - Easy flow enables to fill moulds with complex geometry or large articles that is not common in a grade with this melt flow rate. - Low warpage and high dimensional stability. Applications REPSOL ISPLEN PB151U5M characteristics performs a grade particularly designed for technical components and containers exposed to heavy loads: heavy duty crates, suitcase shells, professional organizers, automotive components, extra high impact battery boxes and industrial components (sports, leisure, packaging...) Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

The grade REPSOL ISPLEN PB154M1F is a phthalate free heterophasic propylene copolymer, especially designed for cast film applications, where high impact strength even at low temperatures is required. It is suitable for the manufacturing of non-oriented films with high tear strength. REPSOL ISPLEN PB154M1F provides the film with lower haze than conventional heterophasic copolymers. This grade is formulated with slip (1700 ppm) and antiblocking (1700 ppm) agents to provide the film with the best processability in high-speed transformation equipment. Applications Non-oriented film extrusion where high impact and tear strength are essential: • Single layer films / Core-layer in co-extruded cast films • Packaging of foodstuffs and non-food stuffs Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB170FR0 is a polypropylene copolymer. The product contains Halogen-free flame retardant. Burning test V-0 according to UL94 can be achieved. The product is not UL-LISTED. Applications • Flame retardant • Technical pieces, in general.

REPSOL ISPLEN PB170FR2 is a polypropylene copolymer. The product contains Halogen-free flame retardant. Burning test V-2 according to UL94 can be achieved. The product is not UL-LISTED. Applications • Technical pieces in general. • Flame Retardant Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN PB170G1F is a phthalate free high fluidity heterophasic ethylene-propylene copolymer characterised by its good balance of properties: excellent impact strength, even at low temperatures, good stiffness, low gel level, good clarity films and very easy processability in film cast extrusion lines. This grade is also suitable for the injection moulding manufacturing of thin-walled articles. Applications Non oriented film extrusion processes, cast or tubular quench: • Single layer films • Core-layer in co-extruded cast films • Packaging of foodstuffs and non-food stuffs • Stationery packaging Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB170G2M is a phthalate free medium-high fluidity heterophasic copolymer, characterised by its good balance of properties. Its molecular structure determines low viscosity and very good flow that permits to fill complex or large moulds with long flow paths obtaining short cycle times and an excellent balance of impact strength and high stiffness to allow the manufacturing of thin-walled articles with good mechanical resistance. Applications The particular characteristics of REPSOL ISPLEN PB170G2M offer a multi-purpose grade intended for use in applications in which high mechanical properties are appreciated, in addition to good processability: - Domestic and leisure furniture. - Square boxes and round storage containers for consumer appliances. - Lids, caps and closures. - Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... - Suitable as compounding-based preparations. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB171H1M is a phthalate free medium-high fluidity heterophasic copolymer with specific molecular structure. It is intended for injection moulding applications that combines very high impact strength, even at low temperatures and excellent processability. Other technical advantages of this grade are: - Highly suitable for manufacturing of articles with very high impact strength at low temperatures. - Low viscosity that enables to fill moulds with complex geometry, large articles or long flow paths. - Low warpage and high dimensional stability. Applications The particular characteristics of REPSOL ISPLEN PB171H1M perform a grade widely used for technical components, transport systems and storage equipment: crates, suitcase shells, professional storage solutions, automotive components, battery boxes, buckets, waste and disposal management systems, industrial components (sports, leisure, electrical...) Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB176N4M is a phthalate free nucleated heterophasic copolymer. It combines the impact strength of a conventional copolymer with the high stiffness level of homopolymers, as well as an excellent processability. At the same time, it exhibits a higher crystallisation temperature and a low shrinkage tendency. REPSOL ISPLEN PB176N4M clearly outperforms standard products and allows the same application performance with a potential cost reduction for finished articles due to: - Potential reduction of wall thickness. - Shorter cooling time: higher mould opening temperatures. - Can replace mineral filled or blends among polypropylenes. Applications REPSOL ISPLEN PB176N4M performance profile expands the final application to broad and diverse goods: packaging (cylindrical containers for paints, leisure chemicals, pool maintenance products), food rounded containers, baskets, garden furniture, flowerpots, toys, trays and technical items for domestic appliances or automotive industries. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB179K1M is a phthalate free medium fluidity heterophasic copolymer with an outstanding mechanical balance. It provides a high level of stiffness with an excellent impact resistance. It is nucleated and contains a special antistatic formulation which provides good long-term aesthetic finished as well as an excellent demoulding performance. Applications REPSOL ISPLEN PB179K1M performance profile expands the final application to broad and diverse goods: packaging (cylindrical containers for paints, leisure chemicals, pool maintenance products), caps and closures, food rounded containers, baskets, garden furniture, flowerpots, toys, trays and technical items for domestic appliances or automotive industries. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB180G2M is a phthalate free medium-high fluidity heterophasic copolymer. It is characterised by its excellent flow properties and by its good balance of mechanical properties: impact strength and stiffness. It is particularly suitable for injection moulding applications of thin walled articles. The material also shows very low tendency to warp and it is used in goods where dimensional stability is important. Applications The particular characteristics of REPSOL ISPLEN PB180G2M permit a grade intended for use in applications where good processability is appreciated in addition to good mechanical properties: - Domestic and leisure furniture. - Square boxes and round storage containers for consumer appliances. - Trays and containers for cold storage of foodstuffs: ice creams, fresh vegetables, fruit processed... - Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... - Suitable for compounding-based preparations. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB183N2M is a phthalate free nucleated and antistatic heterophasic copolymer. It is characterised by its excellent flow properties and good balance of mechanical properties: very high impact strength, even at low temperatures, and high stiffness. It is particularly intended for injection moulding applications used in the manufacture of thin wall articles. Also, the material has a very low tendency to warp and it is used in goods where dimensional stability is important. Applications The particular characteristics of REPSOL ISPLEN PB183N2M make it suitable for applications in which very high impact strength at high fluidity is required as well as good processability: • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Trays and containers for cold storage of foodstuffs: ice creams, fresh vegetables, fruit processed... • Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... • Suitable for compounding-based preparations. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB190K2M is a phthalate free high fluidity heterophasic copolymer, characterised by its excellent flow properties and a good balance of mechanical properties: good impact strength and high stiffness. It is suitable for injection moulding applications in the manufacture of very thin wall articles. It provides a tailored molecular structure allowing to the articles exhibit a low tendency to warp, excellent flow, high dimensional stability and easy demoulding, reaching faster cycle times. Applications The particular characteristics of REPSOL ISPLEN PB190K2M permit the manufacture of articles that combine good toughness, excellent processability and good dimensional stability. It is widely used in: • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Thin-walled containers for exhibiting food products: ice creams, fast food, dairy products... • Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line

REPSOL ISPLEN PB196K1M is a phthalate free very high fluidity heterophasic copolymer, intended for injection moulding applications. It shows a very high stiffness and excellent impact properties in a grade with a very high melt flow index value. In addition, it shows a good shrinkage performance which avoids warpage problems. It is a nucleated grade and also contains a special antistatic formulation which provides good long-term aesthetic appearance and easy demoulding, allowing to achieve faster cycle times. Applications The particular characteristics of REPSOL ISPLEN PB196K1M provide a grade with excellent balance of mechanical properties with very high stiffness and excellent impact properties, as well as a good dimensional stability. It is widely used in: • Pails • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Thin-walled containers for exhibiting food products: ice creams, fast food, dairy products... • Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB199A3M is a phthalate free very high fluidity heterophasic copolymer. It is characterised by its excellent flow properties and good balance of mechanical properties, impact strength and high stiffness. It is particularly suitable for injection moulding applications used in the manufacture of very thin walled articles. It provides a specific molecular structure that allows the articles made with PB199A3M exhibit a low tendency to warp, ultra light flow and high dimensional stability. Antistatic additive package also facilitates material processing, reduces internal stresses and makes the articles extraction from the mould easier reaching high cadence of production. Applications The specific characteristics of REPSOL ISPLEN PB199A3M are particularly suitable for applications requiring good toughness, excellent processability and dimensional stability. It is widely used in very thin-walled articles as: - Containers for exhibiting food products: ice creams, dairy products... - Trays, boxes, cups and rounded containers for processed food. - Flowerpots, buckets, waste containers, lids, caps, cosmetic flasks... - Video boxes. Cases for DVD, CD-R, CD-RW and optical storage systems. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB300A3M is a phthalate free very high fluidity and nucleated heterophasic copolymer. It is characterised by its excellent flow properties and good balance of mechanical properties: impact resistance and high stiffness. It is particularly suitable for injection moulding applications used in the manufacture of very thin walled articles where exceptional organoleptic properties are highly demanded. Articles made with it, exhibit a low tendency to warp, ultra light flow and high dimensional stability. Antistatic additive package also facilitates material processing and makes the articles extraction from the mould easier reaching shorter cycle times. Applications The specific characteristics of REPSOL ISPLEN PB300A3M are particularly suitable for applications with very thin- walled articles as: • Containers for exhibiting food products: ice creams, dairy products... • Trays, boxes, cups and rounded containers for processed food. • Flowerpots, buckets, waste containers, lids, caps, cosmetic flasks... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PB500K1M is a phthalate free ultra high fluidity and nucleated heterophasic copolymer, intended for the manufacturing of thin walled articles due to its excellent balance of mechanical properties. Its antistatic additive package improves demoulding properties providing shorter cycle times and better aesthetic finished. Applications REPSOL ISPLEN PB500K1M is specially designed for: • Thin wall containers with good behaviour at low temperatures: ice creams. • Trays, boxes, cups and rounded containers for processed food. • Household goods. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PC250BS is a low melt flow rate polypropylene homopolymer filled with 20% mineral fillers. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN PC270AV is a homopolymer compound with 20% calcium carbonate, high melt flow rate. It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilized an antistatic formulated. Applications Aesthetic applications which require good gloss surface. - Garden furniture - Toys - Household Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN PC270BS is a homopolymer compound charged with 20% mineral fillers and medium melt flow rate. It shows high stiffness, low warpage and shrinkage behaviour, good aesthetic properties and high gloss surface. Applications Aesthetic applications which require good gloss surface. • Hygienic product. • Adhesive backed hook and loop fasteners. • Electrodomestical appliances. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN PC272AV is a copolymer compound with 20% calcium carbonate and high melt flow rate. It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilized and antistatic formulated. Applications Aesthetic applications which require good gloss surface. - Garden furniture. - Toys. - Household. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® PC272ZV is a sustainable polypropylene with post-consumer recycled material. REPSOL RECICLEX® PC272ZV is a copolymer compound with 20% calcium carbonate and high melt flow rate. It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilized and antistatic formulated. Applications Aesthetic applications which require good gloss surface. • Garden furniture. • Toys. • Household. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN PC370AV is a homopolymer compound with 30% calcium carbonate and high melt flow rate. It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilized and antistatic formulated. Applications Aesthetic applications which require good gloss surface. - Garden furniture - Toys - Household Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL ISPLEN PC372AV is a polypropylene copolymer, 30% mineral fillers reinforced, high melt flow rate and excellent aesthetic properties. It shows a good contrast between stiffness and impact resistance, and a contained level of post-molding contraction. This product is high UV stabilized and has antistatic additives. Applications REPSOL ISPLEN PC372AV is particularly suitable for aesthetic applications that require high gloss and good surface appearance. - Garden furniture - Toys - Household Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL ISPLEN PC390AV is a homopolymer compound with 30% calcium carbonate and high melt flow rate. It shows good impact strength, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilized and antistatic formulated. Applications Aesthetic applications which require good gloss surface. • Garden furniture • Toys • Household Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.