P438J is a medium density LLDPE natural resin and TNPP free designed for extrusion applications. This grade combines stiffness, toughness, high melt strength and low gel content coupled to excellent processability due to its tailored molecular weight distribution and flow properties. It contains an optimized level of stabilizers and is free from any slip or anti-block additives.

SABIC® LLDPE PCG61 is a hexene-linear low density polyethylene typically used for healthcare applications. Films made from this resin exhibit good mechanical, optical and hottack properties. Typical application for SABIC® LLDPE PCG61 are pharmaceutical films, bags and pouches requiring good impact strength, tear resistance,optical performance andhottack properties. Film properties: Film of 50 µm and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7 mm. Compliance to RegulationsSABIC® LLDPE PCG61 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

PO COMPOUND SABIC® P1600A shows superior abrasion resistance, excellent chemical and corrosion resistance, easy processing ability, and good compatibility with HDPE pipes. Typical customer applications are mining and dredging application, a section of piping for use in transporting abrasive slurries requires pipeline with improved abrasion resistance.

R40039E is a linear low density polyethylene grade with elevated density and higher viscosity designed to provide excellent mechanical properties with high rigidity, toughness, good impact strength, low warpage as well as excellent internal and external surface finish. It is in pelletized form, UV-stabilized and has good stress cracking resistance which can be suitable for outdoor applications.

R50035 is a Linear Low Density Polyethylene grade with balanced density and viscosity designed to provide excellent stress cracking resistance, good mechanical properties with high rigidity, toughness, and low warpage. R50035 is a non-UV stabilized grade in pellet form

R50035E is a Linear Low Density Polyethylene grade with balanced density and viscosity designed to provide excellent stress cracking resistance, good mechanical properties with high rigidity, toughness, and low warpage. R50035E is an antioxidant and UV stabilized grade in pellet form.

SABIC® LLDPE R50035EE is a LLDPE copolymer that provides good stress crack resistance, rigidity, toughness, gloss and very low warpage. The resin contains UV stabilizer. It is recommended that SABIC® LLDPE R50035EE is grinded before use in rotational moulding applications. Typical Applications. SABIC® LLDPE R50035EE is used for rotational moulding of large industrial and agricultural tanks, trash containers and chemical shipping drums. Because of its good mechanical properties and low warpage, it is used for injection moulding of screw closures, caps and housewares. SABIC® LLDPE R50035EE is UV stabilised; which provides good protection for the final product. Processing conditions. Oven temperature °C (°F) = 315 (600) Typical processing temperature for injection moulding machines: 210 - 240 °C. Mechanical properties. Test specimens are prepared from compression moulded sheet made according to ASTM D-1928, procedure C. This product is not intended for and must not be used in any pharmaceutical/medical applications.

R50035ET is a Linear Low Density Polyethylene grade with balanced density and viscosity designed to provide excellent stress cracking resistance, good mechanical properties with high rigidity, toughness, and low warpage. R50035ET is an antioxidant and UV stabilized grade in pellet form.

RG50035 is a Linear Low Density Polyethylene grade with balanced density and viscosity designed to provide excellent stress cracking resistance, good mechanical properties with high rigidity, toughness, and low warpage. RG50035 is a non-UV stabilized reactor powder grade.

SABIC® LLDPE RVL4068 is typically used for rotational molding. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 5061 is a natural bimodal high density polyethylene (HDPE) resin. Typical applications include semi-finished goods like sheets as well as non-pressure pipe applications such as cable conduits. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 5061R 10000 (black) is a grade, which has a high densityand a bimodal distribution of the molecular mass. An universal grade for pipe extrusion which, due to a keen combination of properties, is typically used for drinking water and waste water piping. This material meets (inter)national standards for use in drinking water and wastewater piping. MRS class ISO 12162 MPa = 8.0 (PE 80). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 5061R 65308 (blue) is a high density polyethylene (HDPE). With its colour similar to RAL 5012 it is typically used for coextrusion of blue identification stripes on potable water pipes out of SABIC® Vestolen A 5061R black. It is stabilized against UV- and thermal degradation. This product is not intended for and must not be used in any pharmaceutical/medical applications.

Description. SABIC® Vestolen A 6060 is a natural bimodal high density polyethylene (HDPE) resin. Typical applications include semi-finished goods like sheets as well as non-pressure pipe applications such as cable conduits. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060R 10000 (black) is a grade which has a high density and a bimodal distribution of the molecular mass. Due to its profile of properties this material is typically used for gas, drinking water and waste water piping. This material meets (inter)national standards for use in gas, drinking water and waste water piping. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060R 65307(blue) is a grade wich has a high densityand a bimodal distribution of the molecular mass. Due to its profile of properties this material is typicallyused fordrinking water piping.This materialmeets (inter)national standards for use indrinking water piping. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060S 62434 (orange-yellow) is a high density polyethylene (HDPE). With its colour similar to RAL 1033 it is typically used for coextrusion of orange-yellow identification stripes on gas pipes out of SABIC® Vestolen A 6060R black. It is stabilized against UV- and thermal degradation. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060S 63363 (brown) is a high density polyethylene (HDPE). With its colour similar to RAL 8023 it is typically used for coextrusion of brown identification stripes on sewage pipes out of SABIC® Vestolen A 6060R black. It is stabilized against UV- and thermal degradation. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A 6060S 65306 (blue) is a high density polyethylene (HDPE). With its colour similar to RAL 5005 it is typically used for coextrusion of blue identification stripes on potable water pipes out of SABIC® Vestolen A 6060R black. It is stabilized against UV- and thermal degradation. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A RELY 5922R 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to its resistance against slow crack growth (SCG) the material SABIC® Vestolen A RELY 5922R 10000 is considered as PE100-RC and may be used for no dig applications. Moreover it may be used for the production of thick walled (large diameter and low SDR) pipes for infrastructure and industrial application due to its low sagging characteristics and it shows favorable processing behavior. This material meets (inter)national standards for use in gas, drinking water and waste water piping.MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A RELY 5923R 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to the extra low sag characteristics of this material it may be used for the production of thick walled (large diameter and low SDR) pipes for infrastructure and industrial applications and shows favorable processing behaviour. The grade is typically used for gas and drinking water piping. This material meets (inter)national standards for use in gas, drinking water and waste water piping. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A RELY 5924R 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to the low sag characteristics of this material it may be used for the production of thick walled (large diameter and low SDR) pipes for infrastructure and industrial applications and shows favorable processing behaviour. This material meets (inter)national standards for use in gas, drinking water and waste water piping. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A RELY 5933RD 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to its resistance against slow crack growth (SCG) the material SABIC® Vestolen A RELY 5933RD 10000 may be used for no dig applications. Moreover it may be used for the production of thick walled (large diameter and low SDR) pipes for infrastructure and industrial application due to its low sagging characteristics and it shows favorable processing behavior. SABIC® Vestolen A RELY 5933RD 10000 is typically used for potable water pipe systems where improved resistance to chlorinated disinfectants is desired. This material meets (inter)national standards for use in gas, drinking water and waste water piping.MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® Vestolen A RELY 5944HT 10000 is a grade which has a high density and a bimodal distribution of the molecular mass. Due to its heat ageing stability SABIC® Vestolen A RELY 5944HT 10000 fulfils PE-RT II thermal stability requirements according to EN ISO 22391-2 by hydrostatic pressure testing. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7115A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. SUPEER™ 7115A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7115LA is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. The resin contains slip and antiblock additive. SUPEER™ 7115LA is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. SUPEER™ 7118A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118LA is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. The resin contains anti-block and slip agent. SUPEER™ 7118LA is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118LE is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. The resin contains anti-block and slip agent. SABIC® mLLDPE 7118LE is typically used for applications like heavy duty bags, agriculture film, stretch hood, lamination film, frozen bags. Properties have been measured on blown film of 25 µm (mono layer) and BUR = 2.5 Typical processing conditions for SABIC® mLLDPE 7118LE: processing temperatures 180 - 230 °C. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118NE is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118NE is typically used for applications like heavy duty bags, agriculture film, stretch hood, lamination film, frozen bags. Properties have been measured on blown film of 25 µm and BUR = 2.5 Typical processing conditions for SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7118NE : processing temperatures 180 - 230 °C Blow up ratio: 2.0 - 4.0 This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7158A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. SUPEER™ 7158A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7158LA is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance blown film applications. Films produced with this grade offer good tensile and impact strength, puncture resistance and sealing properties. The resin contains anti-block and slip agent. SUPEER™ 7158LA is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7318BE is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance cast film applications. Films produced with this grade offer good impact strength, puncture resistance, sealing and optical properties. SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7318BE is typically used for stretch and lamination films. Processing temperatures 210- 260 °C. Properties have been measured on cast film of 25 µm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7358A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance cast film applications. Films produced with this grade offer good impact strength, puncture resistance, sealing and optical properties. SUPEER™ 7358A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7458A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance cast film applications. Films produced with this grade offer good impact strength, puncture resistance, sealing and optical properties. SUPEER™ 7458A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8112 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and have excellent processability.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8112L is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and have excellent processability. It contains slip and antiblock additives.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8115 is an ethylene-octene copolymer produced via Nexlene™ Technology. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and has good processablity. The grade offers better performance in terms of tensile properties, stiffness / toughness ratio and optical properties.

SABIC® SUPEER™ 8115L is an ethylene-octene copolymer produced via Nexlene™ Technology. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and has good processablity. The grade offers better performance in terms of tensile properties, stiffness / toughness ratio and optical properties.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 8118 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and have excellent processability.