M75056F is a butene-1 copolymerized medium flow high density polyethylene with a good balance between toughness and stiffness performances. It is intended for injection molded articles for general uses.

SABIC HDPE M80063S is an UV stabilized high density polyethylene resin with very narrow molecular weight distribution. It was developed to impart excellent stiffness, combined with good impact strength to injection molded parts.

M80064 is a High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good rigidity, toughness and low warpage.

M80064S is a UV stabilized, High Density Polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required..Typical moulding conditions for SABIC® HDPE M80064S are:This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE M864EG is a high density polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required. SABIC® HDPE M864EG is available with UV stabilizer as SABIC® HDPE M864SE and M864SG. Typical applications: Crates & Boxes: SABIC® HDPE M864EG is typically used for the manufacture of injection molded cases, crates, trays, industrial pails and other similar items. Caps & Closures: SABIC HDPE® M864EG is typically used for Juice, Milk and Edible Oil applications. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE M864SE is an UV stabilized, high density polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required. SABIC® HDPE M864SE is typically used for the manufacture of injection molded cases, crates, trays, industrial pails and other similar items. Processing conditions. Typical molding conditions for SABIC® HDPE M864SE are: Melt temperature: 230 - 275 °C (450 - 525 °F); Mold temperature: 32 - 38 °C (90 - 100 °F); Injection pressure: 69 - 89 MPa (10000 - 13000 PSI) This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC HDPE P4200RT is a high-density polyethylene (HDPE) with high melt viscosity for extrusion. The product provides excellent stress crack resistance properties (ESCR) combined with very good long-term hydrostatic strength, high heat & extremely high extraction stability. It fulfills the requirements of DIN 16833 / ISO 24033 for PE-RT Type II. The material is classified as MRS 10 (PE100) according to ISO 12162.

P4808 is a natural multimodal high density polyethylene (HDPE) resin, specifically designed for non-pressure pipe extrusion application. It provides good stress crack resistance properties (ESCR).

P4808NA is a high density Polyethylene with multimodal distribution of the molecular mass. This is natural color grade suitable for non-pressure pipe applications. It provides good ESCR (environmental stress cracking resistance)

P4909NA is a natural bimodal high density polyethylene (HDPE) resin, specifically designed for non-pressure pipe extrusion application. It provides good stress crack resistance properties (ESCR).

HDPE P5305N is a multimodal high density polyethylene Natural grade specially developed for non-pressure pipe applications. The material offers high stiffness, toughness and excellent combination of stiffness/ESCR.

HDPE P5307N is a multimodal high density polyethylene Natural grade specially developed for non-pressure pipe applications. The material offers high stiffness, good processability and excellent combination of stiffness/ESCR.

P5410NM is a high density polyethylene with very high stiffness, good ESCR and high toughness properties for extrusion process. This product has no additives added.

SABIC® HDPE 5510 10000 (black) is a grade, which has a high density (class MRS 8 - PE 80) and a bimodal distribution of the molecular mass. An universal grade for pipe extrusion which, due to a keen combination of properties, is particularly suitable for drinking water and waste water piping. It is also used for the manufacture of chemical apparatus and containers. This material meets (inter)national standards for use in drinking water and wastewater piping.

HDPE P5616N is a multimodal high density polyethylene Natural grade specially developed for f non-pressure pipe applications. The material offers easy flow, higher stiffness, very good ESCR and sufficient impact strength.

P6006 is black compound high density (class MRS 10 - PE 100) Polyethylene with multimodal distribution of molecular mass. It is specifically designed for pressure Pipe applications. It provides excellent stress crack resistance properties (ESCR) combined with very good long term hydrostatic strength.

P6006AD is black compound multimodal high density polyethylene (classified as PE112 & PE4710) specially designed for pressure pipe applications. It delivers exceptional processing performance.

P6006ADM is black compound multimodal high density polyethylene (supposed to be classified as PE100, and full ISO pipe certificate tests will be done) specially designed for pressure pipe applications. It delivers exceptional processing performance.

P6006AO is an orange compounded multimodal high density polyethylene classified as PE100 pressure gas pipe applications. it delivers exceptional processing performance

P6006LS is black compound multimodal high density (classified as PE112 ) specifically designed for pressure Pipe low sagging (LS) applications. It delivers exceptional low sag performance for large-diameter pipes and pressure pipes with low standerd dimension ratio (SDR).

P6006N is a grade which has a high density (classified as PE4710) and multimodal distribution of the molecular mass. An universal grade for pipe extrusion which, due to keen combination of properties. It can be used for telecommunication, corrugated and spiral pipes.

P6006NA is a high density Polyethylene classified as PE4710 with multimodal distribution of the molecular mass. This is natural color grade suitable for pipe extrusion with excellent combination of properties. It is also suitable for use in telecommunication ducting, corrugated pipes and spiral pipes.

P952 is a natural high density polyethylene (HDPE) resin, specifically designed for non-pressure pipe extrusion application.

SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® HDPE PCG3054 is a high density polyethylene copolymer injection molding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, good gloss and fast molding cycles. SABIC® HDPE PCG3054 is typically used for healthcare packaging applications like, syringes, caps and closures, thin wall articles and other parts for medical devices. Compliance to regulations. SABIC® HDPE PCG3054 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® HDPE PCG453 is typically used for the injection molding of healthcare packaging, caps and closures and other parts for medical packaging. This grade has a very high impact resistance, even at low temperatures. Compliance to regulations. SABIC® HDPE PCG453 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® HDPE PCG5421 is typically used for the blow molding of healthcare packaging (bottles and cans). The product features a good stiffness/ESCR balance combined with good process ability. Compliance to regulations. SABIC® HDPE PCG5421 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® HDPE PCG863 is typically used for the injection molding of healthcare packaging, caps and closures and other parts for medical packaging. It is an easy-to-process, stiff grade. Compliance to regulations. SABIC® HDPE PCG863 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® HDPE PCGF0863 resin is a high density homopolymer with good barrier properties. The grade offers high stiffness, high temperature resistance and relatively high grease resistance. The resin has a low gel level. SABIC® HDPE PCGF0863 is typically used for flexible packaging, pharmaceuticals and devices and release liners. Film properties have been measured at cast film of 25 µm. Water vapor permeability at 38 °C and 100 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h. Compliance to regulations. SABIC® HDPE PCGF0863 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® HDPE T5E01BB Blue is a polyethylene resin, which is formulated with 50% post-consumer recycled plastics. The grade is part of SABIC’s TRUCIRCLE™ portfolio and services. It can be used for blow molding of consumer packaging up to 5 l for household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE T5E01BG Green is a polyethylene resin, which is formulated with 50% post-consumer recycled plastics. The grade is part of SABIC’s TRUCIRCLE™ portfolio and services. It can be used for blow molding of consumer packaging up to 5 l for household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE T5E01BN Natural is a polyethylene resin, which is formulated with 50% post-consumer recycled plastics. The grade is part of SABIC’s TRUCIRCLE™ portfolio and services. It can be used for blow molding of consumer packaging up to 5 l for household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE T5E01BW White is a polyethylene resin, which is formulated with 50% post-consumer recycled plastics. The grade is part of SABIC’s TRUCIRCLE™ portfolio and services. It can be used for blow molding of consumer packaging up to 5 l for household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE W1464 is a high density polyethylene with a narrow molecular weight distribution. To this grade, additives are not intentionally added. This product is not intended for and must not be used in any pharmaceutical/medical applications.

HDPE Y10048M is a High Density Polyethylene having medium molecular weight and a narrow molecular weight distribution for the production of tapes.

SABIC® LDPE 1905U0 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 1905U0 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 1922N0 is an additive free LDPE grade produced by SABIC??s CTR® tubular technology. This grade is typically used for food contact applications that require high product quality, consistency and high level of purity. SABIC will offer for SABIC® LDPE 1922N0 the full food compliance service package. Application SABIC® LDPE 1922N0 is typically used for applications that require a good balance between flow properties and mechanical properties. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 1965N0 is an additive free standard CTR® tubular grade with a high flow rate for masterbatch. This grade has a high filler acceptance. Application SABIC® LDPE 1965N0 is a masterbatch grade typically used for injection moulding applications, where high filler acceptance and good flow properties are required. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2004CX3 is typically used in foam applications. This grade contains anti block and slip agents. Application SABIC® LDPE 2004CX3 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2005EC is the first commercially proven tubular LDPE grade for extrusion coating. The product gives a good combination of processing and end-performance properties. SABIC® LDPE 2005EC can be used on low and (very) high line speed extrusion coating and lamination processes. Due to its excellent draw down performance and good adhesion, very thin coating layers can be applied on the substrate. Application SABIC® LDPE2005EC is typically used in extrusion coating and lamination applications, such as liquid packaging, food packaging and building & construction. Typical substrates for coating or lamination are paper, board, aluminum, PET or PA. Properties Mechanical properties determined on compression moulded specimen (2 mm thick) at test speed of 50 mm/min. Film properties have been measured at film of 25 µm, produced on lab scale equipment. Water vapour permeability at 38 °C and 90 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LDPE 2008N0 is a LDPE tubular grade without additives. SABIC® LDPE 2008N0 is produced using SABIC Clean Tubular Reactor (CTR) Technology with typically high purity. Application SABIC® LDPE 2008N0 is typically used as carrier resin for masterbatch and compounding applications. This product is not intended for and must not be used in any pharmaceutical/medical applications.