Rilsan® 8020 resin is a translucent flexible copolyamide based on renewable resources and without plasticizer. This grade is specially designed for medical uses.

Rilsan® BECNO TL resin is a polyamide produced from a renewable source. This natural grade is designed for cable coating. 11

Rilsan® BECV BLUE T8L resin is a polyamide 11 produced from a renewable source. This blue coloured grade is designed for cable coating but is also suitable for extrusion.

Rilsan® BES BLACK PR resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion.

Rilsan® BESN BLACK P123 TL resin is a flexible polyamide 11 produced from a renewable source. This black grade is designed for extrusion typically for cooling application and for Adblue circuits (SCR).

Rilsan® BESN BLACK P126 T6L resin is a flexible polyamide 11 produced from a renewable source. This grade is designed for tube extrusion and has a high thermo-oxidative resistance. The material described in this document is a development grade. This product is not fully industrialized and has not reach full commercial status. As a consequence Arkema reserve the right to change the composition or optimize the process or suppress the material at any time without notice.

Rilsan® BESN BLACK P20 TL resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion.

Rilsan® BESN BLACK P210 TL resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion. Rilsan® BESN BLACK P210 TL resin falls into the PA11-PHLY category according to DIN 73378 and fulfills all specifications according to DIN 74324, ISO 7628, NFR 12632, and SAEJ844. The biobased carbon content of Rilsan® BESN BLACK P210 TL resin is measured at 89% according to ASTM D6866.

Rilsan® PA 11 G BESN BLACK P212 CTL resin is a polyamide 11 produced from a renewable source. This black grade is specially designed for conductive multi-layers fuel line applications.

Rilsan® BESN BLACK P40 TL resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion.

Rilsan® BESN BLACK P40 TL01 resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and designed for extrusion.

Rilsan® BESN BLACK TL resin is a polyamide 11 produced from a renewable source. This black grade is designed for extrusion.

Rilsan® BESN G9 TL resin is a polyamide 11 produced from a renewable source. This black grade with improved friction properties is designed for extrusion.

Rilsan® BESNO 23 TL4 CC resin is a polyamide 11 produced from a renewable source. This grade with good translucence properties is designed for extrusion.

Rilsan® BESNO MED resin is a polyamide 11 produced from a renewable source. This grade dedicated to extrusion offers the highest quality and it is specifically designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request, letters regarding USP Class VI compliance can be provided.

Rilsan® BESNO P20 TL resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is 94%.

Rilsan® BESNO P20 TLO resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. This grade contains a low amount of oligomers.

Rilsan® BESNO P210 TL resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. Rilsan® BESNO P210 TL resin falls into the PA11-PHLY category according to DIN 73378 and fulfils all specifications according to DIN 74324, ISO 7628, NFR 12632 and SAE J844

Rilsan® BESNO P40 TL resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. The percentage of renewable carbon according to ASTM D 6866 (calculated) is 89%.

Rilsan® BESNO P40 TLO resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. This grade contains a low amount of oligomers. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >85%.

Rilsan® BESNO P40 TLX resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion of large pipe as used in Oil and Gaz applications. According to ASTM D6866, the biobased carbon content is measured at 89%.

Rilsan® BESNO P40 W6 TL resin is a polyamide 11 produced from a renewable source. This grade is plasticized and designed for extrusion. This grade is classified as Halogen Free Flame Retardant (HFFR).

Rilsan® BESNO P400 TL NL resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion.

Rilsan® BESNO TL NB resin is a polyamide 11 produced from a renewable source. This natural grade is designed for extrusion and it does not contain any optical brightener.

Rilsan® BESNO TL resin is a polyamide 11 produced from a renewable source. This natural grade is designed for extrusion.

Rilsan® BESVO A FDA resin is a polyamide 11 produced from a renewable source. This natural grade, dedicated to extrusion, contains a negligible amount of oligomers and is specially designed for food contact applications.

Rilsan® BESVO A MED resin is a polyamide 11 produced from a renewable source. This natural grade, dedicated to extrusion, contains a negligible amount of oligomers. Rilsan® BESVO A MED resin offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request letters regarding USP Class VI compliance can be provided.

Rilsan® BMN BLACK TLD resin is a polyamide 11 produced from a renewable source. This black grade is designed for injection molding.

Rilsan® BMN G8 TLDA resin is a polyamide 11 produced from a renewable source. This grade is designed for injection molding with improved friction properties and approuved for drinking water contact : WRAS (UK).

Rilsan® BMN Y TLD resin is a polyamide 11 produced from a renewable source. This grade is "self-lubricated" and designed for injection molding.

Rilsan® BMNO MED resin is a polyamide 11 produced from a renewable source. This natural grade dedicated to injection offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request letters regarding USP Class VI compliance can be provided.

Rilsan® BMNO P20 TLD resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for injection molding.

Rilsan® BMNO P40 TLD resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for injection molding.

Rilsan® BMNO SG FILAGE resin is a polyamide 11 produced from a renewable source. This natural grade is particularly suitable for textile applications. The percentage of renewable carbon measured according to ASTM D6866 is 98%.

Rilsan® BMNO TLD resin is a polyamide 11 produced from a renewable source. This natural grade is designed for injection molding.

Rilsan® BMNO resin is a polyamide 11 produced from a renewable source. This natural grade contains no additive and is specially designed for food contact application. According to ASTM D6866, the biobased carbon content is measured at 98%.

Rilsan® BMV WHITE 5 P20 D resin is a polyamide 11 produced from a renewable source. This white coloured grade is platicized and designed for injection molding.

Rilsan® BMVO TLD resin is a polyamide 11 produced from a renewable source. This natural grade is designed for injection molding.

Rilsan® BSR 30 resin is a polyamide 11 produced from a renewable source. Light and rigid, this grade is carbon fiber reinforced and designed for injection molding. According to ASTM D6866, the biobased carbon content is measured is 62%.

Rilsan® BUM 30 BLACK resin is a glass bead reinforced polyamide 11 produced from a renewable source. The incorporation of glass beads yields a virtually isotropic reinforced product. This black grade is dedicated to injection molding.