Rilsan® BUM 30 O resin is a glass bead reinforced polyamide 11 produced from a renewable source. The incorporation of glass beads yields a virtually isotropic reinforced product. This natural grade dedicated to injection is specially designed for drinking water application: WRAS (UK).

Rilsan® BZM 23 G9 is a fiberglass reinforced polyamide 11 produced from a renewable source. This black grade with improved friction properties is designed for injection molding.

Rilsan® BZM 30 BLACK TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This black grade is designed for injection molding.

Rilsan® BZM 30 O T3L is a fibreglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection molding.

Rilsan® BZM 30 O TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection molding.

Rilsan® BZM 30 O TLDA is a fibreglass reinforced polyamide 11 produced from a renewable source. This natural grade dedicated to injection is specially designed for drinking water applications: ACS (France), WRAS (UK), NSF61 (USA), KTW and DVGW/W270 (Germany).

Rilsan® BZM 7 O TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection. According to ASTM D6866, the biobased carbon content is measuered at 93%.

Rilsan® BZM 8 O T3L is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection. This grade has been engineered and stabilized to improve color stability. According to ASTM D6866, the biobased carbon content is measured at 100%. Note that this document is a temporary technical data sheet.

Rilsan® BZM 8 O TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection.

Rilsan® Clear G 850 Rnew® MED is a high performance transparent copolyamide having outstanding purity level, partially based on renewable resources. This grade offers highest quality and is specifically designed to meet the stringent requirements of the medical applications. According to ASTM D6866, the biobased carbon content is measured at 45%.

Rilsan® Clear G170 MED is a high performance transparent polyamide resin with outstanding thermal resistance. This grade offers the highest quality and is specifically designed to meet the stringent requirements of the medical applications. Upon request letters regarding USP class VI compliance can be provided.

Rilsan® Clear G170 is a high performance transparent polyamide resin with outstanding thermal resistance. This grade has been designed for injection molding applications.

Rilsan® Clear G820 Rnew® is a high performance transparent polyamide with outstanding chemical resistance and stress cracking resistance.This grade has been designed for injection molding applications. According to ASTM D6866, the biobased carbon content is measured at 62%.

Rilsan® Clear G850 Rnew® is a high performance transparent copolyamide, partially based on renewable resources. This grade has been specially designed for injection molding applications, ideally suited for optic as high end eyewear frames. The percentage of renewable carbon measured according to ASTM D6866 is 45%.

RILSAN® D30 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 21 - 27 µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D40 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 27 - 31 µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D50 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 40 - 46 µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D60 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 43 - 55µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D80 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 95 - 105µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

Rilsan® EVOLUTION ENO P210 TL resin is a flexible polyamide produced from a renewable resource. This grade is designed for high pressure fuel contact application.

Rilsan® FMNO is a natural Polyamide produced from a renewable source. It is unreinforced and designed for injection molding or melt spinning process. The percentage of renewable carbon according to ASTM D6866 is >98%.

Rilsan® KNO resin is a polyamide 11 resin produced from a renewable source. This natural grade is specially designed for injection molding. According to ASTM D6866, the biobased carbon content is measured at 98%.

Rilsan® MB 3000 NAT resin is a polyamide 11 produced from a renewable source. This natural grade is designed for injection molding and is classified as Halogen Free Flame Retardant (HFFR).

Rilsan® MB 3610 BLACK resin is a polyamide 11 produced from a renewable source. This black grade is plasticized and specially designed for pneumatic applications. It combines very high flexibility with good impact resistance.

Rilsan® MB 3610 NAT resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and specially designed for pneumatic applications. It combines very high flexibility with good impact resistance. The percentage of renewable carbon according to ASTM D 6866 (calculated) is >59%.

Rilsan® ROTO 11 NATURAL+ resin is a polyamide 11 powder produced from a renewable source. This natural grade is designed for Rotomolding.

Rilsan® ROTO 11 NATURAL resin is a polyamide 11 powder produced from a renewable source. This natural grade is designed for Rotomolding.

Rilsan® TESNO F resin - Rilsan® POLYAMIDE 1010 (PA1010) Rilsan® TESNO F resin is an undried polyamide 1010 neat resin produced from a renewable source. This natural grade is a designed for compounding.

Rilsan® TIEFLEX R463 BLACK TLCP resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for air brake application (tie layer for air brake tubing).

Rilsan® TIEFLEX R463 NAT TL resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for air brake application (tie layer for air brake tubing).

Rilsan® TIEFLEX R473 NAT TL resin is a flexible and partially bio based tie layer alloy. This grade is designed for air brake application (tie layer for air brake tubing).

Rilsan ® TIEFLEX S442 NAT TL resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for multilayer automotive and trucks fuel lines (tie layer for fuel line).

Rilsan® TIEFLEX S452 BLACK T6L resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for multilayer automotive and trucks fuel lines (tie layer for fuel line). In the case of direct contact with fuel, contact Arkema representative for recommendations.

Rilsan® TIEFLEX S452 NAT T6L resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for multilayer automotive and trucks lines (tie layer for fuel line). In the case of direct contact with fuel, contact Arkema representative for recommendations.