Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength. The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

Description: Thermoplastic Elastomer, TPS-SBS Colour: Black, but can easily be coloured Form: Free flowing pellets Service Temperature Range: -50 to +125°C (unstressed material) Recycling: 100% recyclable Special Features: This material has good adhesion to PC/ABS, ABS, PC and other similar polar substrates.

Description: Thermoplastic Elastomer, TPS-SEBS Service Temperature: -50 to +125°C (unstressed material) Colour: Natural, but can easily be coloured Form: Free flowing pellets Recycling: 100% recyclable

Description: Thermoplastic Elastomer, TPS-SBS Colour: Natural, but can easily be coloured Form: Free flowing pellets Service Temperature: -50 to +125°C (unstressed material) Recycling: 100% recyclable

Dryflex 51309: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 70 Shore A Service Temperature Range: -50 to +120°C (Unstressed Material). Colour: Natural, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

Dryflex 51331 SE: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 50 Shore A Service Temperature Range: -50 to +125°C (Unstressed Material). Colour: Natural Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Moderate (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

Dryflex 51506 SB: Thermoplastic Elastomer Base Material: TPS-SBS Hardness: 60 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material) Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Moderate Ozone / UV Resistance: Moderate Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% Recyclable Mould Shrinkage: Approximately 0.75 - 2% depending on shape of the detail and placement of the gate Bonds to: PP, PS

Description: Thermoplastic Elastomer, TPS-SBS Colour: Natural, but can easily be coloured Form: Free flowing pellets Service Temperature: -50 to +125°C (Unstressed Material) Recycling: 100% Recyclable Special Features: This material has good adhesion to PC/ABS, ABS, PC and other similar polar substrates.

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Black, but can easily be coloured Form: Free flowing pellets Service Temperature: -50 to +125°C (unstressed material) Recycling: Recyclable in closed-loop systems Special Features: This material has good adhesion to PC/ABS, ABS, PC and other similar polar substrates.

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Natural, but can easily be coloured Form: Free flowing pellets Service Temperature: -50 to +125°C (unstressed material) Recycling: Recyclable in closed-loop systems Special Features: This material has good adhesion to PC/ABS, ABS, PC and other similar polar substrates.

Dryflex 51616 PS: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 30 IRHD Service Temperature Range: -50°C to 120°C Colour: Black, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Special Features: Designed for waste water pipe seal applications.

Dryflex 51695 SB: Thermoplastic Elastomer Base Material: TPS-SBS Hardness: 60 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material) Colour: Natural Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Moderate Ozone / UV Resistance: Moderate Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% Recyclable Mould Shrinkage: Approximately 0.75 - 2% depending on shape of the detail and placement of the gate Bonds to: PP, PS

Dryflex 51712 SE: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 60 Shore A Service Temperature Range: -50 to +125°C (unstressed material) Colour: Natural, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (Excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

Description: Thermoplastic Elastomer, TPS-SEBS Colour: Translucent, but can easily be coloured Presentation: Free flowing pellets Service Temperature Range: -50 to +125°C (unstressed material) Recycling: Recyclable in closed-loop systems

Dryflex 51738 SE: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 42 Shore A Service Temperature Range: -50 to +125°C (unstressed material) Colour: Natural, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (Excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE