- Nylamid 311-02 HS BK SP-LL is an economical, impact-modified nylon 6/6 molding resin with increased flexibility for injection molded parts.

Nylamid 4628 HS BK is a pigmented, heat-stabilized, impact-modified,mineral-filled nylon 6/6. This product has good properties and is a good alternative for applications where cost and performance are equally important.

Nylamid 5113-02 HS is a heat stabilized, 13% glass fiber-reinforced nylon 6/6 molding resin offering the good strength properties expected from glass filled materials.

Nylamid 5113-04 BK is an economical, 13% glass fiber-reinforced nylon 6/6 used for injection molding.

Nylamid 5133-02 is a 33% glass fiber-reinforced nylon 6/6 molding resin offering the good strength properties expected from glass filled materials.

Nylamid 5220-02 BK is a 20% glass fiber-reinforced nylon 6 featuring good tensile strength, stiffness and impact resistance.

Nylamid 5305 BK is an economical, 35% glass fiber-reinforced nylon 6,6 used for injection molding.

- Nylamid 8005 is an impact-modified, compounded nylon 6,6 based on low cost feed stocks. - This product is a good alternative for applications where cost and performance are equally important.

Nylamid 9110 G40 BK is a 40% glass fiber-reinforced nylon 6/10 molding resin offering the good strength properties expected from glass filled materials.

- Nylene 132L is a lubricated, low viscosity nylon 6/6 molding resin. - Suitable for a variety of applications, such as clips, fasteners, and levers

- Unreinforced nucleated heat-stabilized nylon 6/6 molding resin - Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with nucleation for faster part set-up - Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

- Heat-stabilized, UV stable nylon 6/6 homopolymer for use in injection molding processes - Exhibits the same part toughness, wear resistance, heat and chemical resistance as standard nylon 6/6 grades while adding a UV resistance package to retain appearance under weathering conditions

- Nylene 201 MS3 is a molybdenum disulfide lubricated nylon 6 molding resin with high ductility. - Optimum processing conditions should provide a melt temperature of 430 - 480 °F at the nozzle. - The abrasion resistance of nylon is enhanced by the addition of molybdenum disulfide. - Excellent wear properties

- High viscosity nylon copolymer with enhanced impact and high flexibility. - Specifically designed for convoluted tubing, but can also be used for other extrusions and some molded parts. - Optimized with good melt strength for high line speeds in thin wall sections. - Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.

- High viscosity nylon copolymer with enhanced impact and high flexibility - One of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts. - Optimized with good melt strength for high line speeds in thin wall sections. - Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.

- High viscosity nylon copolymer with high impact resistance and superior flexibility - Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black - 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts - Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.

- High viscosity nylon copolymer with high impact resistance and superior flexibility - Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black - One of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

Nylene 2408 HSSP BK is a modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles. Especially useful for convoluted tubing.

- Nylene 2408 HSSP UV is a modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles. Especially useful for convoluted tubing. - Resistance to UV light.

- Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles - Especially useful for convoluted tubing.

- High viscosity nylon copolymer with enhanced impact and high flexibility - Optimized with good melt strength for high line speeds in thin wall sections - 2409 HSSP BK is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts.

- High viscosity nylon copolymer with high impact resistance and superior flexibility - Optimized with good melt strength for high line speeds in thin wall sections - Optimized with good melt strength for high line speeds in thin wall sections. - Very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles.

Nylene 311 HS BK is an impact-modified, heat-stabilized nylon 6/6 molding resin with increased flexibility.

- Exhibits an improved impact resistance and flexibility over unmodified nylons - Impact-modified nylon 6,6 molding resin with increased flexibility - Retains the excellent chemical and heat resistance typical of all nylon products

Nylene 311 is an impact-modified nylon 6/6 molding resin with increased flexibility.

- Nylamid 311-02 is an economical, impact-modified, compounded, nylon 6/6 molding resin with increased flexibility for injection molded parts.

Nylamid 311-02 is an economical, impact-modified nylon 6/6 molding resin with increased flexibility for injection molded parts.

- Heat stabilized nylon 6 copolymer for both extrusion and injection molding - Suitable for flexible tubing and overmolding extrusions as well as molding applications that require maximum flexibility from a nylon type resin - Exhibits excellent flexibility and impact resistance in addition to the heat and chemical resistance of nylon 6 resins

Flexurally modified nylon 6 molding resin with excellent impact resistance.

- Specially polymerized, low viscosity nylon 6 resin. - Designed specifically for use in manufacturing concentrates and other compounding uses. - The low viscosity of Nylene 400 aids in dispersion and mixing of concentrates and pigments, and can be used as a carrier for both type 6 and type 6/6 nylons

- Food-contact FDA compliant un-reinforced nylon 6 injection molding resin - Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding - High flow characteristics at minimal processing temperatures

- General purpose un-reinforced nylon 6 injection molding resin - High flow characteristics at minimal processing temperatures - Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding

- General purpose, fast cycling nylon 6 molding resin - Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle - Crystallization initiators provide fast molding cycles through rapid melt set-up - Parts molded have better dimensional stability at moisture equilibrium than parts molded from conventional nylon

- General purpose, fast cycling nylon 6 molding resin - Crystallization initiators provide fast molding cycles through rapid melt set-up - Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding - Parts molded from Nylene 406F have better dimensional stability at moisture equilibrium than parts molded from conventional nylon

- Heat stabilized version of 406 which is a general purpose, fast cycling nylon 6 molding resin - Crystallization initiators provide fast molding cycles through rapid melt set-up. In addition to protection from heat degradation - Parts molded have better dimensional stability at moisture equilibrium than partsm olded from conventional nylon - Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle

Nylene 411 HS is a heat stabilized, impact-modified nylon 6/6 molding resin with medium impact strength.

Nylene 411 is an impact-modified nylon 6/6 molding resin with medium impact strength.

- Nylene 4114 BK SP DSD is an impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility. - Good flow characteristics

Nylene 4114 HS BK is a heat-stabilized, impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility.

Nylene 4114 HS BK is a heat-stabilized, impact-modified nylon 6/6 molding resin with high impact strength and increased flexibility.