Improved Viscosity, Heat Stabilized, Lubricated, Nylon 6

Improved Viscosity, Heat Stabilized, Lubricated, Fast Molding, Nylon 6

Improved Viscosity, Lubricated, Nylon 6

Improved Viscosity, Lubricated, Fast Molding, Nylon 6

33% Glass Reinforced, Pre-Colored Black, Post-Industrial Recycle Grade*, Nylon 6

UV Stabilized, Improved Impact Resistance, Nylon 6

UV Stabilized, Nylon 6

Very High Impact, Improved Chemical Resistance, Nylon 6/12 Compound

Performance Grade, Nylon 6/12

30% Glass Reinforced, Heat Stabilized, Improved Impact Resistance, Nylon 6/12

33% Glass Reinforced, Nylon 6/12

33% Glass Reinforced, Lubricated, Nylon 6/12

43% Glass Reinforced, Nylon 6/12

- Very high viscosity extrusion resin having an ASTM relative viscosity of 800. - Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles. - Optimum processing conditions should permit for a melt temperature of 550 - 575°F (289 - 301°C) at the die. - Properties promote dimensional control for extrusion of pipe, tubing, film, and sheet.

- Nylon 6, high viscosity, extrusion grade recommended for practically all types of extrusion including profile, film, and extrusion coating - Can also be used for blow molding applications - Optimum processing conditions should permit for a melt temperature of 550 - 575°F (289 - 301°C) at the die. - Especially recommended for flexible packaging where as a film or coating it is used for the outside layer in multi-ply film constructions

- Nylon-6 extrusion grade suitable for coating and film co-extrusion applications - Meets the requirements of FDA regulation for direct food contact - Nylene 615 does not absorb food odors

- High viscosity nylon 6 designed for the extrusion of blown film (both mono-layer and multi-layer film structures). - Suitable for profile extrusion such as tubing, shapes, etc. - Nylene 615SA has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. - Nylene films can be drawn to provide pockets for many food shapes. - Good oxygen and flavor barrier to increase shelf life - Offers chemical and heat resistance for hot filling wide range of food and chemicals

- Nylene 6250L is a low viscosity nylon 6/12 molding resin. This material use used in applications requiring good electrical insulation properties. When molding, Nylene 6250L has high flow characteristics at minimum temperatures.

- Cylinder temperatures should be in the 435 - 525°F range. - Designed for excellent cold temperature impact. - High impact modified nylon 6 suitable for both molding and extrusion. - Outstanding high strength and high cold temperature impact. - Parts molded from 743 have excellent impact strength right out of the mold without post conditioning.

- Designed for excellent cold temperature impact. - High impact modification nylon 6 suitable for both molding and extrusion. - Parts molded from 743 have excellent impact strength right out of the mold without post conditioning. - Outstanding high strength and high cold temperature impact. - Cylinder temperatures should be in the 435 - 525°F range.

- Nylene 764B is a heat stabilized, high impact modified nylon suitable for both blow-molding and extrusion. - In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 764B have excellent impact strength right out of the mold without post conditioning. - Outstanding features of Nylene 764B include high strength and high cold temperature impact. - Cylinder temperatures should be in the 435 - 525°F (224 - 274 °C) range. - Excellent melt strength to support large parisons

- Rotational Molding Engineered, High Impact Resistance, Heat Stabilized, Nylon Copolymer - CARB and EPA Fuel Permeation Regulation Compliant

- Rotational Molding Engineered, Heat Stabilized, Nylon Copolymer - CARB and EPA Fuel Permeation Regulation Compliant

- 43% glass fiber reinforced nylon 6/10 injection molding grade. - Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6/10. - Suitable for applications where moisture pickup may be a concern.

Compounding, general grade, Low RV, unlubricated.

- Nylene® BS 600 CR30 is a cationic resin containing 30% Recycled Caprolactam. - Nylene® BS 600 CR30 is a cationic resin formulated to include built-in Enhanced Acid Stain Resistance as either extruded white dyed BCF or as extruded SDN BCF. - Spinning Grade Polymer-Cationic Dye (low amine end group)

- Nylene® BS 600 CSDN is a cationic resin reformulated to include built-in Enhanced Acid Stain Resistance as either extruded white dyed BCF or as extruded SDN BCF . - Spinning Grade Polymer-Cationic Dye (low amine end group)

Compounding, General Grade, mid RV, unlubricated.

Spinning Grade Polymer-Medium Dye

Spinning Grade Polymer-Deep Dye

- Spinning Grade Polymer-Medium Dye - 50% post industrial recycled content

- BX3LF is processed under regular conditions - Medium Viscosity - low friction - Specialty Lubricant added to the polymer matrix to provide reduced surface friction for easier installation characteristics - BXLF's end product has a transparent appearance which leaves your sequential footage indicators readable. BX3LF can be applied to all THHN institutional, commercial and industrial applications. - BXFL is a self-lubricated polymer and has been developed to reduce the coefficient of friction which eliminates the need for additional lubrication in feeder-size THHN. - This self-lubricated polymer is a benefit to the Electrical contractors as it reduces labour costs associated with lubrication, it doesn't leave a messy residue on your hands, pulls faster, easier, cleaner, it's safer and will reduce nylon tear.

- Nylene BX3RF is a medium viscosity, heat stabilized, nylon 6 wire jacketing resin qualified for QMTM2 plenum applications as well as UV 720hr weatherometer. - Offering excellent performance through the range of THHN, THWN, and TFFN constructions. - Shields PVC from impact which causes cracking and breaking and general deterioration of the product. - Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion. - Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.

- Nylene BX3WQ662 is a medium viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions. - This product possesses higher extractables for a balance of performance properties. - Shields PVC from impact which causes cracking and breaking and general deterioration of the product. Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion. - Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.

- Nylene® BX3WQ662X is a medium viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions. This versatile wire jacketing resin provides exceptional performance across various wire and cable applications. - Meets the requirements of UL 83 for wire jacketing. - This product possesses higher extractables for a balance of performance properties. - Shields PVC from impact which causes cracking and breaking and general deterioration of the product. - Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion. - Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.

- Nylene BX3WQ662X-01 is a medium viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions. - Meets the requirements of UL 83 for wire jacketing. - This product possesses higher extractables for a balance of performance properties. - Shields PVC from impact, damage and general deterioration. - Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion. - Heat Stabilized for continuous use temperature to 250F (121C). - Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.

- Nylene NX1440 is a nucleated medium viscosity, fast cycle molding resin. - Parts molded from NX1440 have better dimensional stability at moisture equilibrium than parts molded from other nylon - Parts molded have better dimensional stability at moisture equilibrium than parts molded from conventional nylon. - Crystallization initiators provide fast molding cycles through rapid melt set-up. - Most useful for applications requiring greater stiffness and a higher heat distortion temperature.

- Nylene PAC900-120U is a high viscosity copolymer of nylon 6 and 6,9. - PAC900-120U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.

- Nylene PAC900-120UNL is a high viscosity copolymer of nylon 6 and 6,9. - PAC900-120UNL has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures.

- Nylene PAC9-140U is a high viscosity copolymer of nylon 6 and 6,9. - PAC9-140U has many of the properties desirable in nylon 6 coupled with the advantages of a copolymer, which include lower processing temperatures. - Effective processing is achieved with extruder and die temperatures in the range of 450 - 525 °F (232°C - 274°C) but may be processed as low as 420 °F (216 °C). - Nylene PAC900-140U advantages include high elongation, good clarity and flexibility, and lower processing temperatures.