Polyéthylène (PE): MDPE
Produit | Disponibilité | Description du produit |
---|---|---|
Qenos PE MD0592-1 | Asie Pacifique |
MD 0592-1 is a natural, high molecular weight MDPE co-polymer, developed as a general purpose resin for use in coloured resins for striping, pipe and wire & cable applications. MD 0592-1 contains antioxidants to protect it during extrusion and end use.
MD 0592-1 has been designed for extrusion into a full range of pipe and wire & cable products where Medium Density resins are required. Suitability for use in any application should be determined by appropriate performance testing.
MD 0592-1 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.
|
Qenos PE MD0898-1 | Asie Pacifique |
MD 0898-1 is a black, high molecular weight MDPE co-polymer, developed as a general purpose extrusion resin for use in wire & cable applications.
MD 0898-1 has been designed for uses as a jacketing compound for buried wires and cables where abrasion resistance and cut-through resistance in rocky terrain is required. It can also be used for line-wire and drop-wire applications in a wide range of environments. Suitability for use in any application should be determined by appropriate performance testing.
MD 0898-1 meets the requirements of the Telecommunications cables - Insulation, sheath and jacket standards AS 1049 - 1996. MD 0898-1 is suitable for food contact applications and conforms to the requirements of AS2070.
|
Ravago Compounds HM-304 (Comp) | Amérique du Nord |
Key Features:
- Excellent long term outdoor weatherability (UV8)
- Balance of toughness and rigidity
- Excellent low temperature impact
- Excellent environmental stress crack resistance, ESCR
- Compounded for uniform additive dispersion
- Standard, custom or special effect colors available
- Excellent opacity available in colors
- Standard, custom and natural colors available.
- Stock colors may be available. See Stock color bulletin
- UL component recognition listing (E141240)
- Also available in powder form as HMP-304
|
Ravago Compounds HM-305 (Comp) | Amérique du Nord |
Key Features:
- Good moldability
- Excellent long term outdoor weatherability (UV8)
- Balance of toughness and rigidity
- Excellent low temperature impact
- Excellent environmental stress crack resistance, ESCR
- Compounded for uniform additive dispersion
- Natural as well as standard, custom or special effect colors available
- Stock colors available. See Stock color bulletin
- UL component recognition listing (E141240)
- Also available in powder form as HMP-305
|
Ravago Compounds HM-306 (Comp) | Amérique du Nord |
Key Features:
- Excellent moldability
- Excellent long term outdoor weatherability (UV8)
- Balance of toughness and rigidity
- Excellent low temperature impact
- Excellent environmental stress crack resistance, ESCR
- Compounded for uniform additive dispersion
- Natural as well as standard, custom or special effect colors available
- Stock colors available. See Stock color bulletin
- Excellent opacity
- UL component recognition listing (E141240)
- Also available in powder form as HMP-306
|
Ravago Compounds HM-307 (Comp) | Amérique du Nord |
Key Features:
- Excellent moldability
- Excellent long term outdoor weatherability, (UV8)
- Balance of toughness and rigidity
- Excellent low temperature impact
- Excellent environmental stress crack resistance, ESCR
- Compounded for uniform additive dispersion
- Natural as well as standard, custom or special effect colors available
- Stock colors may be available. See Stock color bulletin
- Excellent opacity
- UL component recognition listing (E141240)
- Also available in powder form as HMP-307
|
Ravago Compounds HMP-305 (Roto) | Amérique du Nord |
Key Features:
- 35-mesh powder
- Good moldability
- Excellent long term outdoor weatherability (UV8)
- Balance of toughness and rigidity
- Excellent low temperature impact
- Excellent environmental stress crack resistance, ESCR
- Compounded for uniform additive dispersion
- Natural as well as standard, custom or special effect colors available
- Stock colors available. See Stock color bulletin
- UL component recognition listing (E141240)
- Also available in pellet form as HM-305
|
Ravago Compounds HMP-306 (Roto) | Amérique du Nord |
Key Features:
- 35-mesh powder
- Excellent moldability
- Excellent long term outdoor weatherability (UV8)
- Balance of toughness and rigidity
- Excellent low temperature impact
- Excellent environmental stress crack resistance, ESCR
- Compounded for uniform additive dispersion
- Natural as well as standard, custom or special effect colors available
- Stock colors available. See Stock color bulletin
- Excellent opacity
- UL component recognition listing (E141240)
- Also available in pellet form as HM-306
|
Ravago Compounds HMP-307 (Roto) | Amérique du Nord |
Key Features:
- 35-mesh powder
- Excellent moldability
- Excellent long term outdoor weatherability, (UV8)
- Balance of toughness and rigidity
- Excellent low temperature impact
- Excellent environmental stress crack resistance, ESCR
- Compounded for uniform additive dispersion
- Natural as well as standard, custom or special effect colors available
- Stock colors may be available. See Stock color bulletin
- Excellent opacity
- UL component recognition listing (E141240)
- Also available in pellet form as HM-307
|
Ravalene® CR M 3544 | Europe |
Recycled Medium Density Polyethylene Resin
|
RESILITY™ DPDB-3135 NT 7 | Amérique du Nord |
RESILITY™ DPDB-3135 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties.
Processing and Stabilization: RESILITY™ DPDB-3135 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy.
- Rotational molding or injection molding
- For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles
- Excellent impact strength, stress crack resistance and processability
- Long term UV stabilization: UV-20+ stabilizer package
Complies with:
- U.S. FDA 21 CFR 177.1520 (c)3.1a (with restrictions)
- European Commission Regulation (EU) No 10/2011
- REACH
- NSF51 and NSF 61
- UL94 HB, UL746C f1
- FMVSS 302
Consult the regulations for complete details.
|
RESILITY™ DPDB-3152 NT 7 | Amérique du Nord |
RESILITY™ DPDB-3152 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties.
Processing and Stabilization: RESILITY™ DPDB-3152 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy.
- Rotational molding or injection molding
- For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles
- Excellent impact strength, stress crack resistance and processability
- Long term UV stabilization: UV-20+ stabilizer package
Complies with:
- U.S. FDA 21 CFR 177.1520 (c)3.1a (with restrictions)
- European Commission Regulation (EU) No 10/2011
- REACH
- NSF51 and NSF 61
- UL94 HB, UL746C f1
Consult the regulations for complete details.
|
RESILITY™ DPDB-3162 NT 7 | Amérique du Nord |
RESILITY™ DPDB-3162 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties.
Processing and Stabilization: RESILITY™ DPDB-3162 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy.
- Rotational molding or injection molding
- For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles
- Excellent impact strength, stress crack resistance and processability
- Long term UV stabilization: UV-20+ stabilizer package
Complies with:
- U.S. FDA 21 CFR 177.1520 (c)3.1a (with restrictions)
- European Commission Regulation (EU) No 10/2011
- REACH
- NSF51 and NSF 61
- UL94 HB, UL746C f1
Consult the regulations for complete details.
|
RESILITY™ DPDB-3170 NT 7 | Amérique du Nord |
RESILITY™ DPDB-3170 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for rotational and injection molding and is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties.
Processing and Stabilization: RESILITY™ DPDB-3170 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy.
- Rotational molding or injection molding
- For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles
- Excellent impact strength, stress crack resistance and processability
- Long term UV stabilization: UV-20+ stabilizer package
Complies with:
- U.S. FDA 21 CFR 177.1520 (c)3.1a (with restrictions)
- EU No 10/2011
- REACH
- NSF51 and NSF 61
- UL94 HB, UL746C f1
- FMVSS 302
Consult the regulations for complete details.
|
Rigidex® HD3575UA | Europe |
RIGIDEX ® HD3575UA is a linear medium density polyethylene grade, supplied in pellet form for use in rotational moulding.
Benefits and Features
- Easy processing
- Good impact strength
- Good environmental stress cracking resistance
- UV stabilised (not guaranteed to EN13341 standard)
Applications
- General purpose rotational moulded articles
|
Rigidex® HD3855UA | Europe |
RIGIDEX ® HD3855UA is a linear medium density polyethylene grade, supplied in pellet form for use in rotational moulding.
Benefits and Features
- Good impact strength and stiffness
- Good environmental stress cracking resistance
- UV stabilised (not guaranteed to EN13341 standard)
Applications
- General purpose rotationally moulded articles
|
Rigidex® K38-20 | Europe |
RIGIDEX® K38-20 is a medium-density polyethylene copolymer designed for the extrusion of non-pressure pipe. RIGIDEX® K38-20 is also suitable for blown film extrusion.
Benefits & Features
- Natural medium density polyethylene with high stress crack resistance and broad molecular weight distribution.
Applications
- Non pressure pipes, corrugated pipes, conduits
- Blown film (as pure, in blend or co-extrusion)
|
SCG MDPE M345C | Amérique du Nord |
SCGC MDPE M345C is a medium density polyethylene designed for extrusion coating with excellent processability, heat stability and good organoleptic.
|
SCG MDPE M545WC | Amérique du Nord |
SCG MDPE M545WC is a black medium density polyethylene compound for jacketing in power cable and communication cable applications. It contains well—dispersed carbon black to provide excellent weathering resistance and UV resistance.
|
SCLAIR® 2316 | Amérique du Nord |
Butene Copolymer MDPE Injection Molding Resin
|
STAR MDPE F20937 | Afrique & Moyen-Orient | |
STAR MDPE FTR144 | Afrique & Moyen-Orient | |
SURPASS® FPs236-A | Amérique du Nord |
Octene Copolymer MDPE Film Resin
|
SURPASS® RMs539-U(UG) | Amérique du Nord |
Octene Copolymer MDPE Rotational Molding Resin
|
TABOREX® TA 1137 MD | Afrique & Moyen-Orient |
A chemically-crosslinkable MDPE compound for the production of flexible pipes with an improved surface quality for domestic hot and cold water, under floor heating and central heating application.
TABOREX-TA 1137 MD is a crosslinkable compound made by Silane grafted ethylene polymer. This graft polymer constitutes together with a TABOREX Masterbatch containing the crosslinking catalyst a "SIOPLAS-SYSTEM". Pipes which are produced with the SILON grade TABOREX-TA 1137 MD fulfil the requirements of ASTM F876-04a, CSA 137.5-03, EN ISO 15875, BS 7291 and all related standards.
This system allows the compound to be extruded as a normal thermoplastic polymer and will attain a high level of crosslinking in the processed form. The final product provides all the superior properties associated with crosslinked polyethylene.
|
TIPELIN® FA 381-10 | Europe |
TIPELIN FA 381-10 is a film grade of medium density polyethylene copolymer (with hexen-1 as comonomer) grade. The product has very good Elmendorf tear strength and Dart drop resistance, low gel content and good vapour barrier capacity. The grade contains antioxidants and acid scavenger.
TIPELIN FA 381-10 is recommended for bags, shopping bags, garbage bags, shrink films, multi-layer films and blend component for LDPE. Recommended film thickness is 0.015 to 0.06 mm.
|
TIPELIN® FS 340-03 | Europe |
TIPELIN FS 340-03 is a film grade of medium density polyethylene copolymer (with hexen-1 as comonomer) that has very good Elmendorf Tear Resistance and excellent Dart Drop Resistance. The grade contains antioxidants and acid scavenger.
TIPELIN FS 340-03 is recommended for bags, shopping bags, garbage bags, shrink films, multi-layer films and blend component for LDPE. Recommended film thickness is 0.015 to 0.06 mm.
|
TIPELIN® FS 383-03 | Europe |
TIPELIN FS 383-03 is a film grade of medium density polyethylene copolymer (with hexene-1 as comonomer) grade. The product has very good Elmendorf tear strength and Dart drop resistance. The grade contains antioxidants and acid scavenger.
TIPELIN FS 383-03 is recommended for bags, shopping bags, garbage bags, shrink films, multi-layer films and blend component for LDPE. Recommended film thickness is 0.015 to 0.06 mm.
|
Titanvene™ LL0214AA | Asie Pacifique |
Titanvene™ LL0214AA is a linear low density polyethylene suitable for a wide variety of extrusion coating applications with excellent draw-down, good seal ability, low neck-in and excellent adhesion properties. Titanvene™ LL0214AA has no slip and anti block additives (bare foot).
Applications
Titanvene™ LL0214AA is typically used for :
- Tarpaulin Coating
- Car-mat coating
- Paper Coating
- General Flexible
Recommended Processing Conditions
Titanvene™ LL0214AA can be easily processed on normal polyethylene extrusion coating machines at temperatures in the range of 300°C to 325°C.
Food Contact Compliance Titanvene™
LL0214AA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.
|
Titanvene™ LL3550UA | Asie Pacifique |
Titanvene™ LL3550UA is a medium density polyethylene, which has been specially developed for manufacturing large containers. Titanvene™ LL3550UA offers excellent UV light protection for outdoor exposure with high levels of UV light radiation where the use of inorganic pigments or carbon black is normally recommended.
Applications
Titanvene™ LL3550UA is designed for large rotational moulding containers, traffic cone and garbage bin.
Recommended Processing Conditions
Titanvene™ LL3550UA can be easily processed on normal polyethylene rotational moulding machines at temperatures in the range of 180°C to 230°C.
Food Contact Compliance
Titanvene™ LL3550UA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.
|
Titanvene™ LL3840UA | Asie Pacifique |
Titanvene™ LL3840UA is a medium density polyethylene, which has been specially developed for manufacturing large containers. Titanvene™ LL3840UA offers excellent UV light protection for outdoor exposure with high levels of UV light radiation where the use of inorganic pigments or carbon black is normally recommended.
Applications
Titanvene™ LL3840UA is designed for large rotational moulding containers, traffic cone and garbage bin.
Recommended Processing Conditions
Titanvene™ LL3840UA can be easily processed on normal polyethylene rotational moulding machines at temperatures in the range of 180°C to 230°C.
Food Contact Compliance
Titanvene™ LL3840UA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.
|
TotalEnergies Polyethylene MDPE 3802 (Blow Molding) | Europe |
MDPE 3802 is a medium density polyethylene with good resistance to impact and excellent Environmental Stress Crack Resistance (ESCR). It has been specifically designed for the blow moulding of flexible containers. It is particularly appropriate for the production of metal drum liners.
MDPE 3802 is a pellet grade and contains antioxidants.
|
TotalEnergies Polyethylene MDPE 3802 (Cable) | Europe |
MDPE 3802 is a natural medium density polyethylene particularly suited for coloured cable sheathing applications and designed to meet the requirements for telecommunication and power cables (medium and high voltage).
MDPE 3802 key characteristics are
- A superior resistance to crack formation and growth
- An optimal balance of flexibility and mechanical strength allowing easy coiling, handling and installation together with high surface hardness and excellent abrasion resistance.
- An optimised formulation of additives (antioxidants) providing outstanding long-term stability in service
- Low dielectric constant
- Easy processing
|
TotalEnergies Polyethylene MDPE 3802 B (Cable) | Europe |
MDPE 3802 B is a black medium density polyethylene particularly suited for cable sheathing applications and designed to meet the requirements for telecommunication and power cables (medium and high voltage).
MDPE 3802 B key characteristics are
- A superior resistance to crack formation and growth
- An optimal balance of flexibility and mechanical strength allowing easy coiling, handling and installation together with high surface hardness and excellent abrasion resistance.
- An optimised formulation of additives and finely dispersed carbon black providing outstanding long-term stability in service
- Low dielectric constant
- Easy processing
|
TotalEnergies Polyethylene MDPE 3802 B (Pipes & Fittings) | Europe |
MDPE 3802 B is a high performance hexene-based black compound, with a MRS 8 MPa - PE 80 classification, and primarily intended for potable water and gas pipe applications.
MDPE 3802 B key characteristics are
- a superior resistance to slow crack growth ensuring safe and long-term network operation
- an optimal balance of flexibility and mechanical strength that allows easy coiling, handling and installing of pipes
- an optimised formulation of additives and finely dispersed carbon black providing outstanding long-term stability in service.
Designation ISO 1872-PE,E/M-ACGHL,40-T012
|
TotalEnergies Polyethylene MDPE HF 513 | Europe |
MDPE HF 513 is a medium density polyethylene produced by slurry loop low pressure process with hexene as co-monomer.
MDPE HF 513 is a semi-high molecular weight polyethylene giving excellent mechanical properties. It shows a broad molecular weight distribution ensuring outstanding processability.
MDPE HF 513 can be used alone, blended or coextruded in a wide variety of blown film applications : consumer, industrial, food or hygiene packaging.
|
TotalEnergies Polyethylene MDPE HR 515 | Europe |
MDPE HR 515 is a medium density polyethylene produced with hexene as co-monomer. It shows a broad molecular weight distribution ensuring outstanding processability.
MDPE HR 515 is especially dedicated to high rigidity film applications, particularly in blend and/or coextrusion with LDPE and/or LLDPE.
MDPE HR 515 is suited for many film applications, in the field of consumer, industrial, food or hygiene packaging.
|
TotalEnergies Polyethylene MDPE HT 514 | Europe |
MDPE HT 514 is a medium density polyethylene produced by slurry loop process with hexene as co-monomer.
MDPE HT 514 is a semi-high molecular weight polyethylene giving excellent mechanical properties. It shows a broad molecular weight distribution ensuring outstanding processability.
MDPE HT 514 can be used alone, blended or coextruded in a wide variety of blown film applications : consumer, industrial, food or hygiene packaging.
|
VENELENE® 8405UV8D | Amérique latine |
Features:
- Good rigidity, Impact resistance.
- This product contains UV and antioxidant additives for outdoor long service life.
- High ESCR.
Applications:
- Large capacity tanks.
|
VENELENE® 8407APUV | Amérique latine |
Features:
- Good processability, rigidity, Impact resistance.
- This product contains UV and antioxidant additives for outdoor long service life.
Applications:
- Large and medium capacity tanks.
- Heavy-duty industrial parts.
- Toys.
|