DuraGrip DGR 6070NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6070NC has an excellent soft touch feel, will bond to olefinics, is easy to color, and is available in FDA compliant formulations. DuraGrip is not hygroscopic and under normal conditions does not require drying.

DuraGrip DGR 6080NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6080NC has an excellent soft touch feel, will bond to olefinics, and is easy to color. DuraGrip is not hygroscopic and under normal conditions does not require drying.

DuraGrip DGR 6090BK is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in injection molding and extrusion processes. DGR 6090BK has an excellent soft touch feel, will bond to olefinics, and is easy to color. DuraGrip is not hygroscopic and under normal conditions does not require drying.

DuraGrip 6150BK is designed to be a special purpose Melt Processible Elastomer (MPE) that is easy to use in injection molding and extrusion processes. DGR 6150BK has an excellent soft touch feel and will Bond to Nylon, ABS, PC, PC/ABS. DuraGrip 6100 series is hygroscopic and requires drying prior to use.

DuraGrip DGR 6150 is offered in an NC (colorable) version, and is designed to chemically bond to a wide variety of thermoplastic substrates including ABS, PC, Nylon 6, Nylon 6/6, glass filled Nylon, ASA, PC/ABS alloys, PBT, and PC/PBT alloys. It is easy to use in injection molding and extrusion processes. DGR 6150NC has excellent elastomeric properties and soft touch feel. DuraGrip bonding grades are hygroscopic, and for best results drying is recommended prior to use.

DuraGrip 6160BK is designed to be a special purpose Melt Processible Elastomer (MPE) that is easy to use in injection molding and extrusion processes. DGR 6160BK has an excellent soft touch feel and will Bond to Nylon, ABS, PC, PC/ABS. DuraGrip 6100 series is hygroscopic and requires drying prior to use.

DuraGrip DGR 6160 is offered in an NC (colorable) version, and is designed to chemically bond to a wide variety of thermoplastic substrates including ABS, PC, Nylon 6, Nylon 6/6, glass filled Nylon, ASA, PC/ABS alloys, PBT, and PC/PBT alloys. It is easy to use in injection molding and extrusion processes. DGR 6160NC has excellent elastomeric properties and soft touch feel. DuraGrip bonding grades are hygroscopic, and for best results drying is recommended prior to use.

DuraGrip 6170BK is designed to be a special purpose Melt Processible Elastomer (MPE) that is easy to use in injection molding and extrusion processes. DGR 6170BK has an excellent soft touch feel and will Bond to Nylon, ABS, PC, PC/ABS. DuraGrip 6100 series is hygroscopic and requires drying prior to use.

DuraGrip 6185BK is a black, special purpose Melt Processible Elastomer (MPE) that is easy to use in injection molding and extrusion processes. DGR 6185BK has an excellent soft touch feel and will Bond to varying Nylons, ABS, PC, PC/ABS. DuraGrip™ 6100 series is hygroscopic and requires drying prior to use.

DuraGrip 6260CL is a clear Thermoplastic Elastomer (TPE) designed for injection molding and extrusion processes. It has excellent clarity, soft-touch feel, high coefficient of friction, and bonds well to polypropylene. DuraGrip is not hygroscopic and under normal conditions does not require drying.

DuraGrip DGR 7800 is a specialty grade Thermoplastic Elastomers (TPE) that is formulated with FDA compliant raw materials and is easy to use in the injection molding and extrusion process. DGR 7800 has an excellent soft touch feel and will bond to olefinics.

Flame Retardant TPE Features: - Excellent Chemical Resistance - Low Temperature Properties - Ultra Low Smoke and Toxicity Applications: - Wire & Cable - Industrial - Aerospace

Dynaflex D3202-1000-03 YL is an easy processing TPE designed for general purpose applications and is suitable for injection molding, extrusion, blow molding, and thermoforming processes. - Dry Feel - Easy Processing - Good Melt Strength - Soft Touch

Dynaflex™ D3202-1000-03 is an easy processing TPE designed for general purpose applications and is suitable for injection molding, extrusion, blow molding, and thermoforming processes. - Dry Feel - Easy Processing - Good Melt Strength - Soft Touch

Dynaflex D3204-1000-03 YL is an easy processing TPE designed for general purpose applications and is suitable for injection molding, extrusion, blow molding, and thermoforming processes. - Dry Feel - Easy Processing - Good Melt Strength - Soft Touch

Dynaflex™ D3204-1000-03 is an easy processing TPE designed for general purpose applications and is suitable for injection molding, extrusion, blow molding, and thermoforming processes. - Dry Feel - Easy Processing - Good Melt Strength - Soft Touch

Dynaflex™ D3226-1000-03 EU is an easy processing TPE designed for general purpose applications. It is suitable for injection molding, extrusion, blow molding and thermoforming processes. - Dry Feel - Easy Processing - Good Melt Strength - Soft Touch

Dynaflex™ D3226-1000-03 is an easy processing TPE designed for general purpose applications. It is suitable for injection molding, extrusion, blow molding and thermoforming processes. - Dry Feel - Easy Processing - Good Melt Strength - Soft Touch

Dynaflex™ G2701-1000-02 is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Adhesion to Polypropylene - Excellent Colorability - High Flow For Long, Thin-Wall Parts - Rubbery Feel - Soft touch

Dynaflex™ G2701C is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Adhesion to Polypropylene - Excellent Colorability - Rubbery Feel - Soft Touch

Dynaflex™ G2703-1000-00 is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance and a low coefficient of friction. - Adhesion to Polypropylene - Excellent Colorability - Improved Mold Release - Rubbery Feel - Soft Touch

Dynaflex™ G2703C is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance and a low coefficient of friction. - Adhesion to Polypropylene - Excellent Colorability - Improved Mold Release - Rubbery Feel - Soft Touch

Dynaflex™ G2706-1000-00 is an easy processing TPE designed for injection molding and extrusion applications that require FDA and medical compliance. - High Puncture Reseal - Overmold Adhesion to Polypropylene - Rubbery Feel - Soft Touch

Dynaflex™ G2709-1000-00 is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Excellent Colorability - Overmold Adhesion to Polypropylene - Rubbery Feel - Soft Touch

Dynaflex™ G2711-1000-00 is an easy process compound designed for injection molding and extrusion applications that require FDA compliance. - Excellent Colorability - Overmold Adhesion to Polypropylene - Rubbery Feel - Soft Touch

Dynaflex™ G2711C is an easy process compound designed for injection molding and extrusion applications that require FDA compliance. - Excellent Colorability - Overmold Adhesion to Polypropylene - Rubbery Feel - Soft Touch

Dynaflex™ G2712-1000-02 is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Excellent Colorability - High Flow For Thin-Wall Parts - Overmold Adhesion to Polypropylene - Rubbery Feel - Soft Touch

Dynaflex™ G2730 is a soft, easy processing compound. - Excellent Weatherability - High Resilience - Soft, Rubbery Feel

Dynaflex™ G2745 is designed for injection molding, however, can also be process by extrusion and injection molding. - Easy Processing - Excellent Colorability - Excellent Ozone Resistance and Heat Aging

Dynaflex™ G2755-1000-00 is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Overmold Adhesion to Polypropylene - Rubbery Feel - Soft Touch

Dynaflex™ G2755C is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Overmold Adhesion to Polypropylene - Rubbery Feel - Soft Touch

Dynaflex™ G2780-0001 is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Excellent Colorability - Overmold Adhesion to Polypropylene - Bonds to Low Density Polyethylene (LDPE) - Rubbery Feel - Soft Touch

Dynaflex™ G2780C is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Excellent Colorability - Overmold Adhesion to Polypropylene - Rubbery Feel - Soft Touch

Dynaflex™ G6703-0001 is an easy processing compound designed for use in injection molding applications where extremely soft feel properties are desired. - Excellent Colorability - Good Ozone Stability - High Elongation - Tactile Feel - Ultra Soft Touch

Dynaflex™ G6713-0001 EU is an easy processing TPE designed for use in injection molding and extrusion applications where an extremely soft feel is desired. This product is formulated for certain food contact and pharmaceutical applications, for further Information please contact our Product stewardship. - Excellent Colorability - Overmold Adhesion To Polypropylene - Tactile Feel - Ultra Soft Touch

Dynaflex™ G6713-0001 is an easy processing TPE designed for use in injection molding and extrusion applications where an extremely soft feel is desired. - Excellent Colorability - Overmold Adhesion To Polypropylene - Tactile Feel - Ultra Soft Touch

Dynaflex™ G6713-9 Black is an easy processing TPE designed for use in injection molding and extrusion applications where an extremely soft feel is desired. - Overmold Adhesion To Polypropylene - Tactile Feel - Ultra Soft Touch

Dynaflex™ G6713C is an easy processing TPE designed for use in injection molding and extrusion applications where an extremely soft feel is desired. - Excellent Colorability - Overmold Adhesion To Polypropylene - Tactile Feel - Ultra Soft Touch

Dynaflex™ G6725-0001 is an easy processing compound designed for use in injection molding applications where extremely soft feel properties are desired. - Excellent Colorability - Good Ozone and UV Stability - Overmold Adhesion to Polypropylene - Tactile Feel - Ultra Soft Touch

Dynaflex™ G6730 is an easy processing TPE designed for use in injection molding applications where an extremely soft feel is desired. - Excellent Colorability - Good Elastic Memory - Overmold Adhesion to Polypropylene - Rubbery Feel - Ultra Soft Touch