Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times. Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE 80A301N U: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 80 Shore A Service Temperature: -50 to +125°C (Unstressed Material). Colour: Natural, but available in any colour shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series. Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times. Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE unfilled series is favourable when translucency and good scratch resistance are required, as well as when there are high surface finish requirements. The material enables an easy and secure pigmenting. Unfilled grades have excellent flow and mechanical properties. The low density results in lower weight compared to the filled and semi-filled series. Dryflex SE unfilled compounds are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE 90A001N U: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 90 Shore A Service Temperature Range: -50 to +125°C (Unstressed Material) Colour: Translucent, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (Excluding organic solvents, aromatic and vegetable oils) Recycling: 100% Recyclable Mould Shrinkage: Approximately 0.75 - 2% depending on shape of the detail and placement of the gate Bonds to: PP, PE

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The Dryflex SE semi-filled series is recommended when the properties of the produced detail requires the advantages of the unfilled series in combination with the filled series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the Dryflex SE semi-filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times. Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured.

Description: Thermoplastic Elastomer, TPS-SEBS Service Temperature: -50 to +125 °C (unstressed material) Colour: Orange Presentation: Free flowing pellets. Recycling: 100% recyclable

Dryflex T are a range of fully transparent thermoplastic elastomers (TPE) compounds. They offer hardnesses from 30 to 90 Shore A, allowing designers a wide degree of design freedom. Typical applications range from high value packaging for toiletries to components for personal care items and sporting goods and goggles. Dryflex transparent grades with food compliance to major food regulations are also available.

Dryflex T are a range of fully transparent thermoplastic elastomers (TPE) compounds. They offer hardnesses from 30 to 90 Shore A, allowing designers a wide degree of design freedom. Typical applications range from high value packaging for toiletries to components for personal care items and sporting goods and goggles. Dryflex transparent grades with food compliance to major food regulations are also available.

Dryflex T are a range of fully transparent thermoplastic elastomers (TPE) compounds. They offer hardnesses from 30 to 90 Shore A, allowing designers a wide degree of design freedom. Typical applications range from high value packaging for toiletries to components for personal care items and sporting goods and goggles. Dryflex transparent grades with food compliance to major food regulations are also available.

Dryflex T are a range of fully transparent thermoplastic elastomers (TPE) compounds. They offer hardnesses from 30 to 90 Shore A, allowing designers a wide degree of design freedom. Typical applications range from high value packaging for toiletries to components for personal care items and sporting goods and goggles. Dryflex transparent grades with food compliance to major food regulations are also available.

Dryflex T659: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 65 Shore A (4mm) Service Temperature Range: -50 to +100°C (unstressed material). Colour: Transparent, but can be available in any colour Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Processing: The material has excellent processing characteristics and can be processed using conventional thermoplastic fabricating methods, including injection moulding and extrusion.

Dryflex T709: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness 70 Shore A (4mm) Service Temperature Range: -50 -- +100 °C (unstressed material) Colour: Transparent, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable

Dryflex T are a range of fully transparent thermoplastic elastomers (TPE) compounds. They offer hardnesses from 30 to 90 Shore A, allowing designers a wide degree of design freedom. Typical applications range from high value packaging for toiletries to components for personal care items and sporting goods and goggles. Dryflex transparent grades with food compliance to major food regulations are also available.

Dryflex T909: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness 90 Shore A (4mm) Service Temperature Range: -50 -- +100 °C (unstressed material) Colour: Transparent, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable

Description: Thermoplastic Elastomer, TPS-SEBS Form: Free flowing pellets Recycling: Recyclable in closed-loop systems Mould Shrinkage: Approx. 0.75 – 2% depending on e.g. the shape of the moulded part and placement of the gate Bonds to: PP, PE

Description: Thermoplastic Elastomer, TPS-SEBS Form: Free flowing pellets Recycling: Recyclable in closed-loop systems Mould Shrinkage: Approx. 0.75 – 2% depending on e.g. the shape of the moulded part and placement of the gate Bonds to: PP, PE

With the Dryflex® WS range we have turned the usual water-resistant properties of thermoplastic elastomers (TPE) on their head to create materials that swell up to ten times their volume when immersed in water. These materials have been developed to expand upon contact with aqueous solutions (pH7 to 12) to form a positive seal and prevent the ingress or exit of water. Material Science A range of formulations have been developed which offer different swell rates when immersed in water. When there is no longer water present the compound shrinks back to its original size, a process of expansion and contraction that can be repeated an unlimited number of times. The compounds have solid structural integrity; unlike many of the equivalent clay based products which can erode and shatter over time. Compounded in any colour, the water swellable TPE is 100% recyclable and can be processed using conventional fabricating methods, including extrusion and injection moulding. Antimicrobial versions are available. Applications One of the main applications for Dryflex WS compounds are hydrophilic waterstops. These are typically used as part of a concrete structure and intended to prevent the passage of fluids (e.g. water) when embedded in and running continuously through concrete joints. We have developed softer grades which offer excellent drapability. They are an ideal choice for waterstops where the profiles may be coiled or need to be fitted around complex structures. Other applications for Dryflex WS TPE compounds include tunnels, water treatment plants, drains, sewers, tanks, glazing and cable protection.

With the Dryflex® WS range we have turned the usual water-resistant properties of thermoplastic elastomers (TPE) on their head to create materials that swell up to ten times their volume when immersed in water. These materials have been developed to expand upon contact with aqueous solutions (pH7 to 12) to form a positive seal and prevent the ingress or exit of water. Material Science A range of formulations have been developed which offer different swell rates when immersed in water. When there is no longer water present the compound shrinks back to its original size, a process of expansion and contraction that can be repeated an unlimited number of times. The compounds have solid structural integrity; unlike many of the equivalent clay based products which can erode and shatter over time. Compounded in any colour, the water swellable TPE is 100% recyclable and can be processed using conventional fabricating methods, including extrusion and injection moulding. Antimicrobial versions are available. Applications One of the main applications for Dryflex WS compounds are hydrophilic waterstops. These are typically used as part of a concrete structure and intended to prevent the passage of fluids (e.g. water) when embedded in and running continuously through concrete joints. We have developed softer grades which offer excellent drapability. They are an ideal choice for waterstops where the profiles may be coiled or need to be fitted around complex structures. Other applications for Dryflex WS TPE compounds include tunnels, water treatment plants, drains, sewers, tanks, glazing and cable protection.

With the Dryflex® WS range we have turned the usual water-resistant properties of thermoplastic elastomers (TPE) on their head to create materials that swell up to ten times their volume when immersed in water. These materials have been developed to expand upon contact with aqueous solutions (pH7 to 12) to form a positive seal and prevent the ingress or exit of water. Material Science A range of formulations have been developed which offer different swell rates when immersed in water. When there is no longer water present the compound shrinks back to its original size, a process of expansion and contraction that can be repeated an unlimited number of times. The compounds have solid structural integrity; unlike many of the equivalent clay based products which can erode and shatter over time. Compounded in any colour, the water swellable TPE is 100% recyclable and can be processed using conventional fabricating methods, including extrusion and injection moulding. Antimicrobial versions are available. Applications One of the main applications for Dryflex WS compounds are hydrophilic waterstops. These are typically used as part of a concrete structure and intended to prevent the passage of fluids (e.g. water) when embedded in and running continuously through concrete joints. We have developed softer grades which offer excellent drapability. They are an ideal choice for waterstops where the profiles may be coiled or need to be fitted around complex structures. Other applications for Dryflex WS TPE compounds include tunnels, water treatment plants, drains, sewers, tanks, glazing and cable protection.

With the Dryflex® WS range we have turned the usual water-resistant properties of thermoplastic elastomers (TPE) on their head to create materials that swell up to ten times their volume when immersed in water. These materials have been developed to expand upon contact with aqueous solutions (pH7 to 12) to form a positive seal and prevent the ingress or exit of water. Material Science A range of formulations have been developed which offer different swell rates when immersed in water. When there is no longer water present the compound shrinks back to its original size, a process of expansion and contraction that can be repeated an unlimited number of times. The compounds have solid structural integrity; unlike many of the equivalent clay based products which can erode and shatter over time. Compounded in any colour, the water swellable TPE is 100% recyclable and can be processed using conventional fabricating methods, including extrusion and injection moulding. Antimicrobial versions are available. Applications One of the main applications for Dryflex WS compounds are hydrophilic waterstops. These are typically used as part of a concrete structure and intended to prevent the passage of fluids (e.g. water) when embedded in and running continuously through concrete joints. We have developed softer grades which offer excellent drapability. They are an ideal choice for waterstops where the profiles may be coiled or need to be fitted around complex structures. Other applications for Dryflex WS TPE compounds include tunnels, water treatment plants, drains, sewers, tanks, glazing and cable protection.

With the Dryflex® WS range we have turned the usual water-resistant properties of thermoplastic elastomers (TPE) on their head to create materials that swell up to ten times their volume when immersed in water. These materials have been developed to expand upon contact with aqueous solutions (pH7 to 12) to form a positive seal and prevent the ingress or exit of water. Material Science A range of formulations have been developed which offer different swell rates when immersed in water. When there is no longer water present the compound shrinks back to its original size, a process of expansion and contraction that can be repeated an unlimited number of times. The compounds have solid structural integrity; unlike many of the equivalent clay based products which can erode and shatter over time. Compounded in any colour, the water swellable TPE is 100% recyclable and can be processed using conventional fabricating methods, including extrusion and injection moulding. Antimicrobial versions are available. Applications One of the main applications for Dryflex WS compounds are hydrophilic waterstops. These are typically used as part of a concrete structure and intended to prevent the passage of fluids (e.g. water) when embedded in and running continuously through concrete joints. We have developed softer grades which offer excellent drapability. They are an ideal choice for waterstops where the profiles may be coiled or need to be fitted around complex structures. Other applications for Dryflex WS TPE compounds include tunnels, water treatment plants, drains, sewers, tanks, glazing and cable protection.

With the Dryflex® WS range we have turned the usual water-resistant properties of thermoplastic elastomers (TPE) on their head to create materials that swell up to ten times their volume when immersed in water. These materials have been developed to expand upon contact with aqueous solutions (pH7 to 12) to form a positive seal and prevent the ingress or exit of water. Material Science A range of formulations have been developed which offer different swell rates when immersed in water. When there is no longer water present the compound shrinks back to its original size, a process of expansion and contraction that can be repeated an unlimited number of times. The compounds have solid structural integrity; unlike many of the equivalent clay based products which can erode and shatter over time. Compounded in any colour, the water swellable TPE is 100% recyclable and can be processed using conventional fabricating methods, including extrusion and injection moulding. Antimicrobial versions are available. Applications One of the main applications for Dryflex WS compounds are hydrophilic waterstops. These are typically used as part of a concrete structure and intended to prevent the passage of fluids (e.g. water) when embedded in and running continuously through concrete joints. We have developed softer grades which offer excellent drapability. They are an ideal choice for waterstops where the profiles may be coiled or need to be fitted around complex structures. Other applications for Dryflex WS TPE compounds include tunnels, water treatment plants, drains, sewers, tanks, glazing and cable protection.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

Description: Thermoplastic Elastomer, TPS-SEBS Service Temperature: -50 to +75°C (unstressed material) Colour: Translucent Form: Free flowing pellets Recycling: 100% recyclable Special Features A foamable compound, developed for the production of cellular profiles. Conforms to the BS 7412 deflection recovery requirements at -10C, 23C and 55C for Class A and B glazing gaskets and weatherstrips.

DURAFLEX 360ST UV is a UV-rated Thermoplastic Elastomer (TPE). It is specifically designed for over-molding on a variety of nylons and glass-filled nylons. It offers excellent surface appearance, good elasticity, and easy processability. It is available in natural, black, and colors. This grade is available in AMR, EUR, and APAC.

DURAFLEX TPC ET55 FR VO is a flame rated, high performance Polyester Elastomer with enhanced stability. It is available in natural, black, and colors. This grade is available in AMR, EUR, and APAC.

DURAFLEX TPC-ET40D is a general purpose, flexible polyester elastomer. If offers a unique combination of mechanical, physical, and chemical properties for high performance applications. This product has very high impact strength and flexibility at low temperatures, excellent fatigue resistance, and excellent oil / solvent resistance. It is available in natural, black, and colors. This grade is available in AMR, EUR, and APAC.

DURAFLEX TPC-ET55NHFR is a halogen-free flame retarded flexible polyester elastomer. It offers a unique combination of mechanical, physical, and chemical properties for high performance applications. It offers very high impact strength and flexibility at low temperatures, excellent fatigue resistance, excellent oil & solvent resistance, and is easy to process.

DURAFLEX TPE60A is designed to chemically bond to a wide variety of thermoplastic substrates including ABS, PC, Nylon 6, Nylon 6/6, glass filled Nylon, ASA, PC/ABS alloys, PBT and PC/PBT alloys. It is available in black or natural.

DURAFLEX TPE82AU is a UV rated Thermoplastic Elastomer (TPE). It is heat stabilized, weather resistant, and provides excellent adhesion to PP. It is available in black. This grade is available in AMR, EUR, and APAC.

DuraGrip DGR 6040 NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6040NC has an excellent soft touch feel and will bond to olefinics. DuraGrip is not hygroscopic and under normal conditions does not require drying.

DuraGrip DGR 6030NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6030NC has an excellent soft touch feel, will bond to olefinics, and is easy to color. DuraGrip is not hygroscopic and under normal conditions does not require drying.

DuraGrip 6040BK is a general-purpose Thermoplastic Elastomer (TPE) designed for injection molding processes. It has a high coefficient of friction, low melt viscosity and bonds well to polypropylene. DuraGrip 6040BK is not hygroscopic and under normal conditions does not require drying.

DuraGrip DGR 6050NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6050NC has an excellent soft touch feel, will bond to olefinics, and is easy to color. DuraGrip is not hygroscopic and under normal conditions does not require drying.

DuraGrip 6070BK is a general-purpose Thermoplastic Elastomer (TPE) designed for injection molding processes. It has a high coefficient of friction, low melt viscosity and bonds well to polypropylene. DuraGrip 6070BK is not hygroscopic and under normal conditions does not require drying.