This information has been secured during the course of product development. Both the product and its properties are subject to change before final commercialization. Hostacom TRC704D medium high melt flow, 1,500 MPa flexural modulus, UV-stabilized thermoplastic elastomeric olefin (TEO) resin has an excellent combination of properties and processability. It was designed for applications that require excellent aesthetics and a good balance of stiffness and impact performance.

This information has been secured during the course of product development. Both the product and its properties are subject to change before final commercialization. Hostacom TRC705N high melt flow, 1,700 MPa flexural modulus, precolored, UV-stabilized, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent combination of stiffness, impact resistance and processability. It was designed primarily for automotive interior applications that demand balanced performance characteristics, such as those that require compliance to FMVSS201 or FMVSS208.

Hostacom TRC787Y NATURAL is a thermoplastic polyolefin elastomer compound for injection molding. It is typically used for fully painted automotive interior parts including instrument panels, doors, and consoles. It has an excellent balance of processability, rigidity, and excellent impact strength.

Hostacom TYC727N C NATURAL is high melt flow, High flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, rigidity, impact, and scratch resistance. The material is available for color-matched, pellet form.

Hostacom TYC712N high melt flow, 1,900 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, rigidity, and impact resistance. It was designed for assorted automotive interior trim components.

Hostacom TYC727D high melt flow, 2,000 MPa flexural modulus, UV-stabilized, precolored, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, rigidity, and impact and scratch and mar resistance. It was designed primarily for molded-in color automotive instrument panels that require high durability.

Hostacom TYC727N CARBON high melt flow, 2,000 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, rigidity, impact, and scratch and mar resistance. It is typically used for molded-in color automotive instrument panels that require high durability.

Hostacom TYC727N NATRL high melt flow, 2,000 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, rigidity, impact, and scratch and mar resistance. It is typically used for molded-in color automotive instrument panels that require high durability.

Hostacom TYC727N PARCHMENT high melt flow, 2,000 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, rigidity, impact, and scratch and mar resistance. It is typically used for molded-in color automotive instrument panels that require high durability.

Hostacom TYC727N SHALE high melt flow, 2,000 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, rigidity, impact, and scratch and mar resistance. It is typically used for molded-in color automotive instrument panels that require high durability.

Hostacom TYC727N VAPOR high melt flow, 2,000 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, rigidity, impact, and scratch and mar resistance. It is typically used for molded-in color automotive instrument panels that require high durability.

Hostacom TYC727N JXW Black high melt flow, 2,000 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of processability, rigidity, impact, and scratch and mar resistance. It is typically used for molded-in color automotive instrument panels that require high durability.

Hostacom XFBR712 medium melt flow, 1,800 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of stiffness, impact resistance and dimensional stability. It was designed primarily for painted automotive interior components.

ICORENE® 1901 is an ethylene based octene plastomer powder developed for rotational moulding. This grade is particularly suitable for use in flexible applications such as buoys.

ICORENE® 2910 is an ethylene based octene plastomer powder specifically developed for rotational moulding. This grade is designed for use in applications requiring a very flexible material.

ICORENE® 9402 is a thermoplastic elastomer specifically developed for rotational moulding in collaboration with API Spa. This grade offers optimum cold and hot elasticity with UV resistance. It has an excellent appearance with excellent soft touch properties. ICORENE® 9402 is a tough material which will not break @ -40°C impact strength.

ICORENE® 9468 is a versatile thermoplastic copolyester elastomer. This grade combines resilience, heat and chemical resistance with strength and durability.

ICORENE N2004 is an ethylene based octene plastomer produced using a metallocene catalyst. This grade is designed for applications requiring excellent flow, high flexibility, outstanding toughness and excellent low temperature impact.

ICORENE N9810 is a Styrene Butadiene Styrene block copolymer (SBS). This grade is mainly used for bitumen modification.

Indure E1500HG-UV NAT thermoplastic olefinic elastomer (TPO) that is UV-stabilized. It is typically used for high-gloss thermoformed applications where excellent gloss retention after forming is required. It is also typically used as a coextrusion cap layer with other extrusion-grade TPOs from LyondellBasell Advanced Polyolefins.

Indure X210 engineered polyolefin material is designed for large, molded-in-color automotive applications that require ductile impact properties at low temperatures as well as processability. Typical Customer Applications: Exterior Applications, Bumpers

Indure X210A engineered polyolefin material is designed for large, molded-in-color automotive exterior applications that require good scratch-and-mar characteristics, ductile impact properties at low temperatures and processability

INDURE™ X220 engineered polyolefin material is designed for large, molded-in-color automotive exterior applications that require good scratch-and-mar characteristics, high stiffness, and good dimensional stability. Applications: Exterior Applications

Indure X76 engineered polyolefin material is designed for various automotive exterior-trim applications. It offers an excellent combination of scratch resistance, high-gloss part appearance, processability and a balance of stiffness and impact resistance. Applications: Exterior Applications

INVISIONTM GX 5055G2 is a stryrenic thermoplastic elastomer of 55 Shore A durometer, which has been formulated for superior injection molding processability, elasticity, and resiliency. It is targeted for applications requiring a material with the following properties:

Styrenic Polyolefin Thermoplastic Elastomer; Injection Molding Grade

SEBS COMPOUND - 70 SHORE A

TPE Styrenic Rubber

SEBS COMPOUND - 90 SHORE A

TPV Fully Crosslinked EPDM Rubber

Invision™ VX-5055UI is a TPV Partially Crosslinked EPDM Rubber.

TPV Partially Crosslinked EPDM Rubber

TPV Partially Crosslinked EPDM Rubber

TPV Partially Crosslinked EPDM Rubber

TPV Partially Crosslinked EPDM Rubber that is black in color.

TPV Partially Crosslinked EPDM Rubber

Koattro KT AR05 is a novel plastomeric material based on LyondellBasell technology with unique characteristics. The product shows an excellent compression set performance which is highly compatible with Polypropylene. Blended with PP it enhances softness, elastic recovery, elongation at break and impact resistance whilst improving transparancy and reducing stress whitening. Blended at low concentrations in PP, Koattro KT AR05 enhances also the thermal bonding strength. KT AR05 is available in free flowing pellet form. This product is not intended for use in medical and pharmaceutical applications.

Koattro KT MR05 is a novel plastomeric material based on Lyondellbasell technology with unique characteristics and is highly compatible with Polypropylene(PP). This product blended with PP enhances softness, elastic recovery, elongation at break and impact resistance whilst improving transparancy and reducing stress whitening. Koattro KT MR05 is available in free flowing pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lucalen A2910M is a natural adhesive low density polyethelene copolymer with a high thermal stability. Due to the acrylic acid/acrylate copolymer (E/A) content this grade offers excellent adhesion to polar materials (i.e. epoxy resin, steel, aluminium, etc.). It is design to be used by our customer in 2-layer anti corrosion coating as well as in wire & cable compounds. The material is available in pellet form.

Lucalen A3110M Q244 is a natural adhesive medium/high density polyethelene copolymer powder with a high thermal stability. Due to the acrilic acid/acrylate copolymer (E/A) content this grade offers excellent adhesion to polar materials (i.e. epoxy resin, steel, aluminium, etc.). It is design to be used by our customers in 3-layer anti corrosion coating applications where sprayable powder is requested. The material is available in powder form. The particle size distribution is mainly in the 90 - 500 µm range.