FUSABOND™ A560 is a chemically modified ethylene acrylate copolymer Uses - Polymer Modifier Composition - Proprietary Applications - Impact modifier with high polarity to provide a very good combination of flow and toughness for glass-filled polyamide compounds.

INFUSE™ 9000 Olefin Block Copolymer is a high performance olefin block copolymer that can be widely used in thermoplastic elastomer applications where higher service temperature requirements are needed. INFUSE 9000 also provides high filler loading capability along with low compression set and good processability. Main Characteristics: - High upper service temperature performance - Highly flexible with good elastic recovery - Fast set up times for processability - General purpose elastomer - Excellent for compounds and blends Complies with - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INFUSE™ 9007 Olefin Block Copolymer is a lower density higher performance olefin block copolymer that can be widely used in TPE applications where higher service temperature requirements are needed. INFUSE 9007 also provides high filler loading capability and gives good elastic recovery. Main Characteristics: - High upper service temperature performance - Highly flexible with good elastic recovery - General purpose elastomer - Excellent for compounds and blends - Talc dusted Complies with - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INFUSE 9010 烯烃嵌段共聚物是一种用于配制软质材料的粘性低、拉伸强度高的烯烃弹性体。它可以很容易地与众多其他材料进行结合以制造出从简单到复杂的共混物。其多变性使其在为众多的软质应用领域提供解决方案时能大显身手，这些软质应用涉及从手柄到玩具等很多产品。 主要特性： - 特别适宜于共混物和混炼物 - 产品的粘性低 - 在施工上限温度下性能优异 - 特别柔软，而且具有非常好的弹性回复 - 通用的弹性体

INFUSE™ 9077 is a high performance olefin block copolymer that can be compounded with a variety of polyolefins to make a thermoplastic elastomer suitable for XL foams and other applications This product is delivered with a nominal talc partitioning agent to assist in material handling. Main Characteristics - Highly flexible - Crosslinkable for foam applications Applications - Compounding to make soft XL foams

INFUSE™ 9100 Olefin Block Copolymer is a high performance olefin block copolymer that can be widely used in thermoplastic elastomer applications where higher service temperature requirements are needed. INFUSE 9100 exhibits very good processability in various extrusion processes. INFUSE 9100 also provides high filler loading capability along with low compression set over a wide temperature range. Main Characteristics - High upper service temperature performance - Highly flexible with good elastic recovery - Fast set up times for processability - General purpose elastomer - Excellent for compounds and blends Complies with - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INFUSE™ 9107 Olefin Block Copolymer is a lower density higher performance olefin copolymer that can be widely used in TPE applications where higher service temperature requirements are needed. INFUSE 9107 also provides high filler loading capability and gives good elastic recovery. Main Characteristics: - High upper service temperature performance - Highly flexible with good elastic recovery - Fast set up times for processability - General purpose elastomer - Excellent for compounds and blends - Talc dusted Complies with: - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INFUSE™ 9500 Olefin Block Copolymer is a olefin copolymer that has excellent flow characteristics and performs well in a wide range of general purpose thermoplastic elastomer applications, such as injection molding and profile extrusion. INFUSE 9500 provides outstanding haptics in over molding applications with polypropylene (PP) and Polyethylene (PE). In addition, its high crystallization temperature and lower density drive lower production costs by reducing cycle time and reducing part weight. Main Characteristics: - High upper service temperature performance - Highly flexible with good elastic recovery - Fast set up times for processability - General purpose elastomer - Excellent for compounds and blends Complies with: - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INFUSE™ 9507 Olefin Block Copolymer is a high performance olefin block copolymer that has excellent flow characteristics and performs well in a wide range of general purpose thermoplastic elastomer applications, such as injection molding and profile extrusion. INFUSE 9507 provides outstanding haptics in over molding applications with polypropylene (PP) and Polyethylene (PE). In addition its lower density can help control resin and production costs, while reducing the weight of end products. Main Characteristics: - High upper service temperature performance - Highly flexible with good elastic recovery - Fast set up times for processability - General purpose elastomer - Excellent for compounds and blends - Talc dusted Complies with - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details

INFUSE™ 9530 Olefin Block Copolymer is a high performance olefin block copolymer that has excellent flow characteristics and performs well in a wide range of general purpose thermoplastic elastomer applications, such as injection molding and profile extrusion. INFUSE 9530 provides outstanding haptics in over molding applications with polypropylene (PP) and Polyethylene (PE). In addition, its lower density can help control resin and production costs, while reducing the weight of end products. Main Characteristics: - High upper service temperature performance - Highly flexible with good elastic recovery - Fast set up times for processability - General purpose elastomer - Excellent for compounds and blends Complies with - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INFUSE™ 9807 is a high performance olefin block copolymer that offers excellent performance in durable, flexible injection molded industrial and consumer goods. INFUSE 9807 has a higher set up temperature, which allows for faster injection molding cycle times. In addition, its high crystallization temperature and lower density drive lower production costs by reducing cycle time and reducing part weight. Main Characteristics: - High upper service temperature performance - Highly flexible with good elastic recovery - Fast set up times for processability - General purpose elastomer - Excellent for compounds and blends - Talc dusted Complies with: - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INFUSE™ 9817 Olefin Block Copolymer is a high performance olefin block copolymer that offers excellent performance in durable, flexible injection molded industrial and consumer goods. INFUSE 9817 has a higher set up temperature, which allows for faster injection molding cycle times. In addition, its high crystallization temperature and lower density drive to lower production cost by reducing cycle time and reducing part weight. Main Characteristics: - High upper service temperature performance - Highly flexible with good elastic recovery - General purpose elastomer - Excellent for compounds and blends - Reduced part weight - Talc dusted Complies with - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INFUSE™ 9900 Olefin Block Copolymer is a high flow olefin elastomer. It is readily formulated for a variety of applications. Main Characteristics: - High flow product - General purpose elastomer

D9348.15 is a high-performance olefin block copolymer that offers excellent performance in durable, flexible injection molded industrial and consumer goods. D3948.15 has a higher set up temperature, which allows for faster injection molding cycle times. In addition, its high crystallization temperature and lower density drive lower production costs by reducing cycle time and reducing part weight. Main Characteristics: - High upper service temperature performance - Low density - Low crystallinity - Excellent thermal stability - Low Tg (excellent low temperature properties) - Excellent flexibility - Noncorrosive - Excellent color and odor - Excellent compatibility with a wide range of polymers - PE dusted Complies with: - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

INTUNE 10510 Olefin Block Copolymer is polyolefin modifier suitable for modifying polypropylene for excellent impact and clarity balance. Main characteristics: - Excellent compatibility with Polypropylene - Excellent clarity impact property balance - Excellent processability - Free Flowing pellets

NORDEL(TM) 3765 XFL EPDM is a medium viscosity, medium ethylene ethylene-propylene-diene terpolymer (EPDM) having a moderate cure rate that is suited to applications where low modulus, good elongation, as well as heat and weather resistance are required. Main Characteristics: - Medium crystalline - Low diene - High molecular weight - Heat and UV stable Applications: - Impact modification - Wire and cable - Peroxide cured heat resistant hose - Sulfur cured waterproofing membranes Complies with: - U.S. FDA 21 CFR 177.2600 - U.S. FDA 21 CFR 175.1520 (See NOTES 1) - U.S. FDA 21 CFR 175.105 (See NOTES 2) - U.S. FDA 21 CFR 177.1210 Consult the regulations for complete details. NOTES: (1) Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. (2) Adhesives only.

NORDEL™ 4572 XFM EPDM is an amorphous ethylene-propylene-diene terpolymer (EPDM) grade designed for extruded applications. It is ideally suited for dense extruded profiles, coolant hoses, and general-purpose moldings. The combination of high viscosity and low crystallinity allows for good balance of processability, extensibility, low-temperature properties, and performance. Main Characteristics: - Amorphous - Medium diene - High molecular weight - Good low temperature properties Applications: - Extruded profiles - Coolant hoses

NORDEL™ 4771 XFL EPDM is a high molecular weight semi-crystalline grade designed for extruded applications. Its broad molecular weight distribution provides good mixing and dispersion performance. Combination of high molecular weight and high crystallinity offers high green strength and high extensibility. It is suited for extruded applications such as profiles and hoses. It is also suitable TPV applications. Main Characteristics: - Semi-crystalline - Medium diene - High molecular weight - High green strength Applications: - Hoses - Extruded profiles/weatherstrip - TPV - Plastics modification Complies with - U.S. FDA 21 CFR 177.2600, - U.S. FDA 21 CFR 177.1520 (See NOTES 1), - U.S. FDA 21 CFR 175.105 (See NOTES 2), - U.S. FDA 21 CFR 177.1210. Consult the regulations for complete details. NOTES: (1) Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. (2) Adhesives only.

NORDEL™ 6530 XFC EPDM is an amorphous EPDM grade designed for extrusion and molded applications that require fast cure conditions and rapid property build. The combination of low viscosity, broad molecular weight distribution, and low crystallinity allows for good balance of processability, low-temperature properties and performance. It is ideally suited for fast extrusion, injection and transfer molded brake parts, corner moldings, general-purpose gaskets, and moldings. The combination of low viscosity and low crystallinity allows for good processability, low temperature properties, and product performance without the addition of a plasticizer. Main Characteristics: - Amorphous - High diene - Low viscosity - Good low temperature properties Applications: - Injection and transfer molded articles - Extruded profiles - General purpose gaskets Complies with: - U.S. FDA 21 CFR 175.105 (See Note 1) Consult the regulations for complete details. NOTES: (1) Adhesives only.

NORDEL 6555 OE Hydrocarbon Rubber is an amorphous EPDM grade designed for foamed extruded applications. It is ideally suited for sponge extruded profiles requiring fast cure conditions. The combination of high viscosity and low crystallinity allows for good balance of processability, extensibility, low-temperature properties and performance. The product features improved mixing and extrusion characteristics, suitable for class A surface manufacturing with improved shape stability of the green compound. Main Characteristics: - Amorphous - High diene - High molecular weight - Good low temperature properties Applications: - Extruded profiles - Coolant hoses Complies with: - U.S. FDA 21 CFR 175.105 (See NOTES 2), Consult the regulations for complete details. NOTES: (1) Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. (2) Adhesives only.

NORDEL 6565 XFC is an amorphous EPDM grade designed for extruded applications. It is ideally suited for solid and foamed extruded profiles requiring fast cure conditions. The combination of high viscosity and low crystallinity allows for good balance of processability, extensibility, low-temperature properties and performance. The product features improved mixing and extrusion characteristics, suitable for class A surface manufacturing with improved shape stability of the green compound. Main Characteristics: - Amorphous - High diene - High molecular weight - Good low temperature properties Applications: - Extruded profiles - Coolant hoses Complies with: - U.S. FDA 21 CFR 175.105 (See NOTES), Consult the regulations for complete details. NOTES: (1) Adhesives only.

NORDEL™ IP 3430 烃橡胶是一种无定形、二烯含量极低的乙烯-丙烯-二烯三元共聚物 (EPDM)，适用于过氧化物固化物品。NORDEL IP 3430 亦可与丁基橡胶共混，以提高其加工性能和硫化性能，应用于汽车和自行车的轮胎内胎材料。 主要特性： - 无定形 - 二烯含量极低 - 分子量低 - 耐热稳定以及对紫外线稳定 - 符合以下法规 -- 美国食品和药物管理局法规21 CFR 177.2600的要求， -- 美国食品和药物管理局法规21 CFR 177.1520的要求 (参见备注 1)， -- 美国食品和药物管理局法规21 CFR 175.105的要求 (参见备注 2)， -- 美国食品和药物管理局法规21 CFR 177.1210的要求。 -- 请查询法规以获取完备的细节资料。 应用领域： - 作为共混组分与丁基橡胶共混，用于轮胎内胎 - 过氧化物固化模塑部件 备注： (1) 可用于接触所有类型的食品，但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。

NORDEL™ IP 3640 烃橡胶是一种无定形、二烯含量低的乙烯-丙烯-二烯三元共聚物 (EPDM)，适用于耐热的、过氧化物固化制品。NORDEL IP 3640亦可与丁基橡胶共混，以提高其加工性能和硫化性能，应用于汽车和自行车的轮胎内胎材料。 主要特性： - 无定形 - 二烯含量低 - 耐热性能好 - 符合以下法规 美国食品和药物管理局法规 21 CFR 177.2600， 美国食品和药物管理局法规 21 CFR 177.1520 (参见备注 1)， 美国食品和药物管理局法规 21 CFR 175.105 (参见备注 2)， 美国食品和药物管理局法规 21 CFR 177.1210。 请查询法规以获取完备的细节资料。 应用领域： - 作为共混组分与丁基橡胶共混，用于轮胎内胎 - 耐热软管和带材 备注： (1) 可用于接触所有类型的食品，但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。

NORDEL™ IP 3720P 烃橡胶是一种半结晶、二烯含量极低的乙烯-丙烯-二烯三元共聚物 (EPDM)，其粘度低，使其具备了优异的加工特性，其不饱和度低使其稳定性好，可经受长期紫外线(UV)曝晒和长期受热。该产品应用于较低和中等延伸率共混物的挤出和模塑加工，并可采用过氧化物进行固化。此外，这种聚合物也应用于热塑性材料的改性，比如聚乙烯或者聚丙烯等。 主要特性： - 半结晶 - 二烯含量极低 - 分子量低 - 耐热和耐紫外线稳定 - 符合以下法规 美国食品和药物管理局法规 21 CFR 177.2600， 美国食品和药物管理局法规 21 CFR 175.105 (仅限粘合剂)。 请查询法规以获取完备的细节资料。 应用领域： - 诸如聚乙烯和聚丙烯在内的塑料改性 - 过氧化物固化，耐热模塑制品

NORDEL™ IP 3722P EL Hydrocarbon Rubber is a semi-crystalline, very low diene-containing polymer with low viscosity for good processability. The low unsaturation provides excellent long term thermal and UV stability. It is specially designed for medium voltage wire and cable applications. It can also be used in peroxide cured molded and other extruded applications. NORDEL IP 3722P EL is made via INSITE* technology. Main Characteristics: - Semi-crystalline - Very low diene - Low molecular weight - Heat and UV stable Applications: - Low and Medium voltage Wire & Cable - Peroxide cured, heat resistant moldings for Wire & Cable applications Complies with: - U.S. FDA 21 CFR 177.2600 - U.S. FDA 21 CFR 175.105 (Adhesives only) - EU, No 10/2011 - Consult the regulations for complete details.

NORDEL™ IP 3722P 烃橡胶是一种半结晶、二烯含量极低的聚合物，粘度低，加工性能好。其较低的不饱和度使其具有优异的长期热稳定性和抗紫外线稳定性。这种产品专门应用于中等电压的电线和电缆的加工。这种聚合物亦可应用于过氧化物固化的模制品和其他挤出加工。NORDEL IP 3722P 采用了INSITE*技术，是一种开发性产品。 主要特性： - 半结晶 - 二烯含量极低 - 分子量低 - 耐热和耐紫外线稳定 - 符合以下法规 -- 美国食品和药物管理局法规 21 CFR 177.2600， -- 美国食品和药物管理局法规 21 CFR 175.105 (仅限粘合剂)。 -- EU, No 10/2011 -- 请查询法规以获取完备的细节资料。 应用领域： - 中等电压的电线和电缆 - 过氧化物固化，耐热模制品

641 NORDEL™ IP 3745P 烃橡胶是一种半结晶、二烯含量极低的乙烯-丙烯-二烯三元共聚物 (EPDM)，分子量分布较窄。该产品应用于诸如聚乙烯和聚丙烯在内的性能改性，可用于过氧化物固化的橡胶共混物。 主要特性： - 半结晶 - 二烯含量极低 - 分子量中等，分子量分布窄 - 耐热和耐紫外线稳定 - 符合以下法规 美国食品和药物管理局法规 21 CFR 177.2600， 美国食品和药物管理局法规 21 CFR 177.1520 (参见备注 1)， 美国食品和药物管理局法规 21 CFR 175.105 (参见备注 2)， 美国食品和药物管理局法规 21 CFR 177.1210。 EU, No 10/2011 请查询法规以获取完备的细节资料。 应用领域： - 诸如聚乙烯和聚丙烯在内的塑料改性 - 过氧化物固化模塑制品 备注： (1) 可用于接触所有类型的食品，但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。

NORDEL™ IP 3760P 烃橡胶是一种中等粘度、二烯含量中等的乙烯-丙烯-二烯三元共聚物 (EPDM)，具有适中的固化速率，适用于需要模量低、伸长率好、同时也耐热、耐候的应用领域。供货形式为透明粒料。NORDEL IP 3760P的制备采用了INSITE™ 技术。 主要特性： - 结晶度中等 - 二烯含量低 - 分子量高 - 耐热和耐紫外线稳定 符合以下法规： 美国食品和药物管理局法规 21 CFR 177.2600 美国食品和药物管理局法规 21 CFR 175.1520 (参见备注 1) 美国食品和药物管理局法规 21 CFR 175.105 (参见备注 2) 美国食品和药物管理局法规 21 CFR 177.1210 请查询法规以获取完备的细节资料。 应用领域： - 抗冲击改性 - 电线和电缆 - 过氧化物固化的耐热软管 备注： (1) 可用于接触所有类型的食品，但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。

NORDEL™ IP 4520 烃橡胶是一种无定形、乙烯-丙烯-二烯三元共聚物 (EPDM)，应用于模塑加工。这种产品特别适宜于注塑和压铸刹车零部件、角模制品、通用型垫片和模制品。它综合了低粘度和低结晶度，使其在不添加塑化剂的情况下，依然具有较好的加工性能、低温性能和产品性能表现。 主要特性： - 无定形 - 二烯含量中等 - 分子量低 - 良好的低温性能 - 符合以下法规 美国食品和药物管理局法规 21 CFR 177.2600， 美国食品和药物管理局法规 21 CFR 175.105 (仅限粘合剂)。 请查询法规以获取完备的细节资料。 应用领域： - 注塑和压铸刹车零部件 - 通用型垫片

NORDEL™ IP 4570 烃橡胶一种无定形、乙烯-丙烯-二烯三元共聚物 (EPDM)，应用于挤出加工。这种产品特别适宜于异型材、制冷软管的挤出加工和通用的模塑加工。该产品综合了高粘度和低结晶度的性能，使其在加工性能、延伸率、低温性能和性能表现上具有良好的平衡性。 主要特性： - 无定形 - 二烯含量中等 - 分子量高 - 低温性能好 - 符合以下法规 美国食品和药物管理局法规 21 CFR 177.2600， 美国食品和药物管理局法规 21 CFR 177.1520 (参见备注 1)， 美国食品和药物管理局法规 21 CFR 175.105 (参见备注 2)， 美国食品和药物管理局法规 21 CFR 177.1210。 请查询法规以获取完备的细节资料。 应用领域： - 异型材挤出 - 制冷系统软管 备注： (1) 可用于接触所有类型的食品，但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。

644 NORDEL™ IP 4640 烃橡胶是一种半无定形的乙烯-丙烯-二烯三元共聚物 (EPDM)，应用于模塑和挤出加工。这种产品特别适宜于制造通用型垫片和模制品，以及异型材和软管的挤出加工。它综合了中等的粘度和结晶度低的性能，使其在加工性能、低温性能和产品性能上具有良好的平衡性。 主要特性： - 二烯含量中等 - 分子量中等 - 符合以下法规 美国食品和药物管理局法规 21 CFR 177.2600， 美国食品和药物管理局法规 21 CFR 177.1520 (参见备注 1)， 美国食品和药物管理局法规 21 CFR 175.105 (参见备注 2)， 美国食品和药物管理局法规 21 CFR 177.1210。 请查询法规以获取完备的细节资料。 应用领域： - 通用垫片和模制品 - 异型材和软管的挤出加工 备注： (1) 可用于接触所有类型的食品，但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。

NORDEL™ IP 4725P 烃橡胶是一种低粘度、半结晶牌号，加工简易，固化速率快，在标准的硫化固化体系之内具有较高的固化程度。这种产品应用于模制和挤出加工，这些加工需要粘度低、原始强度高、成品硬度高。它特别适宜于高硬度异型材挤出和模制品。它亦可采用过氧化物固化。 主要特性： - 半结晶 - 二烯含量中等 - 分子量低 - 原始强度高 - 符合以下法规 -- 美国食品和药物管理局法规 21 CFR 177.2600， -- 美国食品和药物管理局法规 21 CFR 175.105 (仅限粘合剂)。 -- 请查询法规以获取完备的细节资料。 应用领域： - 高硬度异型材挤出和模制品 - 软管

NORDEL™ IP 4760P 烃橡胶是一种半结晶的乙烯-丙烯-二烯三元共聚物 (EPDM)。这种聚合物具有独特的双态乙烯分布所产生的加工性能之间的平衡性是其他半结晶EPDM中所不具备的。与竞争性的对照聚合物相比，NORDEL IP 4760P具有更好的低温性能和更高的原始强度。 主要特性： - 半结晶 - 二烯含量中等 - 双态乙烯分布 - 低温性能和高原始强度之间的平衡性。 - 符合以下法规 美国食品和药物管理局法规 21 CFR 177.2600， 美国食品和药物管理局法规 21 CFR 177.1520 (参见备注 1)， 美国食品和药物管理局法规 21 CFR 175.105 (参见备注 2)， 美国食品和药物管理局法规 21 CFR 177.1210。 请查询法规以获取完备的细节资料。 应用领域： - 异型材挤出 - 软管 备注： (1) 可用于接触所有类型的食品，但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。

NORDEL™ IP 4770P 烃橡胶是一种高分子量、半结晶牌号，固化速率快，在标准的硫化固化体系之内具有较高的固化程度。它具有原始强度高和延伸率高的特点。该产品应用于诸如异型材和软管的挤出加工，亦适用于模制品。 主要特性： - 半结晶 - 二烯含量中等 - 分子量高 - 原始强度高 - 符合以下法规 美国食品和药物管理局法规 21 CFR 177.2600， 美国食品和药物管理局法规 21 CFR 177.1520 (参见备注 1)， 美国食品和药物管理局法规 21 CFR 175.105 (参见备注 2)， 美国食品和药物管理局法规 21 CFR 177.1210。 请查询法规以获取完备的细节资料。 应用领域： - 软管 - 异型材/密封条的挤出 - 塑料改性 备注： (1) 可用于接触所有类型的食品，但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。

NORDEL™ IP 4770R 烃橡胶是一种高分子量、半结晶牌号，固化速率快，在标准的硫化固化体系之内具有较高的固化程度。它具有原始强度高和延伸率高的特点。该产品应用于诸如异型材和软管的挤出加工，亦适用于模制品。为了提高混合速度和产能，这个牌号的产品以棒料的形式供货。 主要特性： - 半结晶 - 二烯含量中等 - 分子量高 - 原始强度高 - 符合以下法规 美国食品和药物管理局法规 21 CFR 177.2600， 美国食品和药物管理局法规 21 CFR 177.1520 (参见备注 1)， 美国食品和药物管理局法规 21 CFR 175.105 (参见备注 2)， 美国食品和药物管理局法规 21 CFR 177.1210。 请查询法规以获取完备的细节资料。 应用领域： - 异型材/密封条挤出 - 通用软管 - 制冷系统软管 - 通用模制品 备注： (1) 可用于接触所有类型的食品，但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。

NORDEL IP 4785HM Hydrocarbon Rubber is a high viscosity semi-crystalline grade which offers ease of processing, fast cure rates, and high states of cure with standard sulfur cure systems. It is designed for molded and extruded applications requiring high viscosities, high green strength, and high filler capacity. It is ideally suited for a wide range of extruded profiles and molded goods. It can also be peroxide cured. Main Characteristics - Semi-crystalline - Medium Diene levels - Good Green Strength - Pellet Form for Fast Mixing - Low Gel Content Complies with: - U.S. FDA 21 CFR 175.105: Adhesives only - U.S. FDA 21 CFR 177.1210 - U.S. FDA 21 CFR 177.1520(c)3.4 - U.S. FDA 21 CFR 177.2600 - Consult the regulations for complete details. Applications - Extruded Profiles - Automotive Weather Stripping - Hose and Tubing Storage and Handling - NORDEL IP 4785HM Hydrocarbon Rubber should be stored indoors in its original packaging. The quality of EPDM products may be affected by exposure to artificial or natural light. The polymer should be stored in a cool environment to maintain the as received pellet condition. Product Form - The product is typically a pellet but may with time change into a friable bale.

NORDEL IP 4820 Hydrocarbon Rubber is a crystalline ethylene-propylene-diene terpolymer (EPDM). It has a low viscosity for excellent flow characteristics and hot green strength. It has been designed for property modification of thermoset rubber and thermoplastic polyolefin compounds including polyethylene and polypropylene. It can be crosslinked via traditional techniques including sulfur, phenolic, peroxide, irradiation, and hydrosylilation. NORDEL IP 4820 is Commercial Active and made via INSITE* technology. Main Characteristics: - Highly crystalline - Medium diene - Low molecular weight - High green strength - Complies with -- U.S. FDA 21 CFR 177.2600 (See NOTES 1) -- U.S. FDA 21 CFR 177.1520 (See NOTES 1 & 2) -- U.S. FDA 21 CFR 175.105 (See NOTES 3) -- Consult the regulations for complete details. Applications: - High hardness extrusions and moldings - Plastics modification Storage and Handling: The quality of EPDM products may be affected by exposure to artificial or natural light. This product should be stored indoors in its original packaging and out of direct sunlight. NOTES: (1) Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. (2) Compliant as a blend component in compliant polymers at levels up to 25% for conditions of use E through G. (3) Adhesives only.

NORDEL™ IP 5565 烃橡胶是一种无定形的乙烯-丙烯-二烯三元共聚物 (EPDM)，应用于需要固化速率快的挤出加工领域。该牌号特别适宜于连续固化的实体和海绵异型材。其固化速率快的特性亦可使其模制加工减少循环时间。 主要特性： - 无定形 - 二烯含量高 - 分子量高 - 固化快速 - 低温性能好 - 符合以下法规 -- 美国食品和药物管理局法规 21 CFR 175.105 (仅限粘合剂)。 -- 请查询法规以获取完备的细节资料。 应用领域： - 异型材/密封条挤出 - 海绵异型材

NUCREL™ 0403 is a copolymer of ethylene and methacrylic acid, made with nominally 4 wt% methacrylic acid. The resin is available for use in conventional blown and cast film extrusion and coextrusion equipment designed to process polyethylene resins. Uses - Adhesives; Packaging; Sealants Composition - 4% By Weight Methacrylic Acid comonomer content

NUCREL™ 0411HS is a copolymer of ethylene and methacrylic acid made with nominally 4 wt% methacrylic acid. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment designed to process polyethylene resins. Uses - Adhesives; Packaging; Sealants Composition - 4% By Weight Methacrylic Acid comonomer content Characteristics/Benefits - High Stability, High Draw