聚丙烯 (PP) by Borealis AG
产品 | 可用性 | 产品说明 |
---|---|---|
Bormed™ RD804CF-11 | 北美洲 |
Bormed RD804CF-11 is a random copolymer with low ethylene content.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process, blown films on tubular water quenching process as well as injection moulding and ISBM (2-stage process) for ampoules and bottles.
|
Bormed™ RD808CF | 北美洲 |
Bormed RD808CF is a random copolymer with high ethylene content.
The current version of Bormed RD808CF has been scheduled for deletion.
Please refer to Bormed RD808CF-11 documentation for new projects.
In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process as well as injection moulding and ISBM (2-stage process) for ampoules and bottles.
CAS-No.: 9010-79-1
Applications
Bormed RD808CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RD808CF .
- Medical device packaging
- Secondary packaging
- Pouches for Continuous Ambulatory Peritoneal Dialysis
- Ampoules/small bottles for eye, ear & nose drops
- Parenteral nutrition bags
- Bottles for IV-solutions
- Pouches for IV solutions
- Bottles/ampoules for injectable solutions
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High gloss
- Low sealing initiation temperature
- Low haze
- High water vapour barrier
- High softness
- Sterilisability by means of water steam
- High impact strength
|
Bormed™ RD808CF-11 | 北美洲 |
Bormed RD808CF-11 is a random copolymer with high ethylene content.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process as well as injection moulding and ISBM (2-stage process) for ampoules and bottles.
|
Bormed™ RE816CF | 北美洲 |
Bormed RE816CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No. 9010-79-1
|
Bormed™ RF825MO | 北美洲 |
Bormed RF825MO is a resin intended for evaluation for use in Healthcare applications.
Bormed RF825MO is polypropylene random copolymer with high melt flow. Material is modified with a nucleating agent resulting in a fast crystallisation which gives possibilities for a fast cycle-time. Products produced from Bormed RF825MO are characterised with a very high transparency, high gloss and a good stiffness-impact balance. Material can be sterilised with ethylene oxide and steam.
Applications
Bormed RF825MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RF825MO .
- Needle hubs
- Blood collection systems
- Catheter connections
- Disposable non pre-filled syringes
- Laboratory disposable
- Diagnostic disposable
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
- Easy processability
- Excellent transparency
- Good printability
|
Bormed™ RF830MO | 北美洲 |
Bormed RF830MO is a resin intended for evaluation for use in Healthcare applications.
Bormed RF830MO is a transparent polypropylene random copolymer, modified with a nucleating agent, suitable for articles which need post sterilisation with radiation. Bormed RF830MO is characterized by easy processability, high transparency, high gloss and a good stiffness-impact balance. Products moulded from this grade and radiated with the dose of 25 kGy have a shelf-life of 5 years, if properly stored. Material can also be sterilised with ethylene oxide and steam.
Applications
Bormed RF830MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RF830MO .
- Disposable non pre-filled syringes
- Needle hubs
- Catheter connections
- Laboratory disposable
- Diagnostic products
- Blood collection tubes
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
|
Bormed™ RG835MO | 北美洲 |
Bormed RG835MO is a resin intended for evaluation for use in Healthcare applications.
Bormed RG835MO is a transparent polypropylene random copolymer with a high melt flow, modified with slip agent for products requiring a low surface friction. This grade is characterized by easy processability, high transparency, high gloss, controlled low friction and good stiffness-impact balance at ambient temperature. In addition it can be sterilized with ethylene oxide and steam.
Applications
Bormed RG835MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RG835MO .
- Needle hubs
- Needle protection
- Disposable non pre-filled syringes
- Caps and closures
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
- Improved gloss
- High transparency
- Easy processability
|
Bormed™ RJ880MO | 北美洲 |
Bormed RJ880MO is a resin intended for evaluation for use in Healthcare applications.
Bormed RJ880MO is a specially modified highly-transparent polypropylene random copolymer with very high melt flow rate. It is designed for high-speed injection moulding and contains nucleating agent and demoulding additives. Additivation has been optimized to provide good antistatic and demoulding properties without blooming or plate-out problems. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage. Products originating from this grade have excellent transparency, good organoleptic properties, good balance of stiffness and impact strength at ambient temperatures.
Applications
Bormed RJ880MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed RJ880MO .
- Lids
- Square containers
- Square boxes
- Closures
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- Good flow behaviour
- Very good clarity
- stiffness and impact balance
- Low blooming
|
Bormed™ SB815MO | 北美洲 |
SB815MO is a resin intended for evaluation for use in Healthcare applications.
SB815MO is a grade designed for production of bottles & ampoules for use in Pharmaceutical & Diagnostic applications manufactured via BFS, Extrusion or Injection blow moulding technologies. Final articles can be steam sterilised at 121 °C and are characterised by flexibility, allowing a good collapsibility and good optical properties. Haze of 0,5 mm and 1 mm injection moulded plaques is approximately 10 % and 28 % respectively.
CAS-No. 9010-79-1
|
Bormed™ SC820CF | 北美洲 |
Bormed SC820CF is a soft random heterophasic copolymer.
The current version of Bormed SC820CF has been scheduled for deletion.
Please refer to Bormed SC820CF-11 documentation for new projects.
In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown film on tubular water quenching process.
CAS-No.: 9010-79-1
Applications
Bormed SC820CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed SC820CF .
- Medical device packaging
- Pouches for IV solutions
- Pouches for Continuous Ambulatory Peritoneal Dialysis
- Secondary packaging
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High gloss
- High toughness at low temperatures
- High softness
- Sterilisability by means of water steam
- Low haze
- High water vapour barrier
- High impact strength at 23 °C
|
Bormed™ SC820CF-11 | 北美洲 |
Bormed SC820CF-11 is a soft random heterophasic copolymer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown film on tubular water quenching process.
CAS-No.: 9010-79-1
Applications
Bormed SC820CF-11 has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed SC820CF-11 .
- Medical device packaging
- Pouches for IV solutions
- Pouches for Continuous Ambulatory Peritoneal Dialysis
- Secondary packaging
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- High gloss
- High toughness at low temperatures
- High softness
- Sterilisability by means of water steam
- Low haze
- High water vapour barrier
- High impact strength at 23 °C
|
Bormed™ SC876CF | 北美洲 |
Bormed SC876CF is a very soft random heterophasic copolymer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown film on tubular water quenching process.
CAS-No. 9010-79-1
|
Bormed™ TD109CF | 北美洲 |
Bormed TD109CF is a propylene alpha olefin copolymer.
This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown films on tubular water quenching process.
CAS-No.: 25895-47-0
Applications
Bormed TD109CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed TD109CF .
- Medical device packaging
- Pouches for IV solutions
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special features
- Excellent optical properties
- Wide sealing window
- Low sealing initiation temperature
- Sterilisability by means of water steam
- High seal strength and hot tack force
|
Bormod™ BE961MO | 北美洲 |
BE961MO is a heterophasic copolymer. This grade is characterized by an optimum combination of high stiffness, low creep and very high impact strength.
This grade uses Borealis Nucleation Technology (BNT) to increase productivity by cycle time reduction. BNT in combination with excellent stiffness and good flow properties creates a high potential for wall-thickness reduction. Products originating from this grade have very good demoulding properties, well-balanced mechanical properties, excellent dimension consistency with respect to different colors and good organoleptic properties.
CAS-No.: 9010-79-1
Applications
- Crates and boxes
- Luggage
- Pails
- Technical parts
Special Features
- High stiffness
- Low creep performance
- High impact strength
- Good flow behaviour
|
Bormod™ BF970MO | 北美洲 |
BF970MO is a heterophasic copolymer. This product is characterized by an optimum combination of very high stiffness and high impact strength.
This grade uses Borealis Nucleation Technology (BNT) to increase productivity by cycle time reduction. BNT in combination with excellent stiffness and good flow properties creates a high potential for wall-thickness reduction. Products originating from this grade have very good demoulding properties, well-balanced mechanical properties, excellent dimension consistency with respect to different colors and good organoleptic properties.
CAS-No.: 9010-79-1
Applications
- Crates and boxes
- Technical parts
- Pails
Special Features
- High stiffness
- Good flow behaviour
- High impact strength
|
Bormod™ BH348MO | 北美洲 |
BH348MO is a polypropylene copolymer characterized by high impact strength, fast flow and crystallisation speed.
The material is nucleated with Borealis Nucleation Technology (BNT). This grade contains antistatic and demoulding additives which, together with enhanced nucleation, create a high potential for cycle time reduction.
CAS-No.: 9010-79-1
Applications
- Thin wall containers
- Ice cream containers
|
Bormod™ HD905CF | 北美洲 |
HD905CF is a polypropylene homopolymer
HD905CF is a nucleated, high crystalline film resin. This grade is suitable for the manufacturing of unoriented films on chill roll processes. Optical properties will not deteriorate as with conventional homo- or copolymers at elevated temperatures.
CAS-No.: 9003-07-0
Applications
HD905CF is recommended for:
- Twist film
- Textile packaging film
- Label film
- Hot fill
- Lamination films
Special features
HD905CF is optimised to deliver:
- Very high stiffness
- Excellent planarity
- Excellent temperature resistance
- Very good optical properties
|
Bormod™ HF955MO | 北美洲 |
HF955MO is a very stiff polypropylene homopolymer. This grade combines unique Borstar reactor design with Borealis Nucleation Technology (BNT) to produce highly-crystalline polypropylene. This combination also results in unique balance of properties especially suited for high-speed injection moulding.
Products originating from this grade have excellent demoulding properties, very high stiffness, good transparency and gloss and good impact strength at ambient temperatures.
CAS-No.: 9003-07-0
Applications
- Caps and closures
- Rectangular and flat products, like lids and trays
- Products with thicker wall sections requiring short cycle time
- Containers and products with medium to long flow length
Special features
- Good stiffness
- Improved gloss and excellent transparency
- Good impact strength
|
Borpact™ BC918CF | 北美洲 |
BC918CF is a heterophasic copolymer.
BC918CF is a high crystalline copolymer film resin. This grade is suitable for the manufacturing of unoriented films on cast lines, conventional blown film lines with air cooling as well as roll stack process for thermoformable films/sheets.
CAS-No. 9010-79-1
|
Borpact™ SH950MO | 北美洲 |
SH950MO is a random heterophasic copolymer intended for injection moulding. This grade yields high transparency and deep freeze impact resistance combined with excellent flow properties.
The material is nucleated with Borealis Nucleation Technology (BNT). This grade contains antistatic and demoulding additives which, together with enhanced nucleation, create a high potential for cycle time reduction.
Products moulded from this grade have an excellent balance of see-through transparency and deep freeze impact resistance. In addition, components have good gloss, very low stress whitening and excellent taste and odour properties. BNT in combination with excellent stiffness and good flow properties creates a high potential for wall-thickness reduction.
Applications
- Ice cream containers
- Crates
- Deep freeze boxes for food storage
- Bread boxes, crates
- Flip top caps, high gloss closures
Special Features
- Good flow
- Good impact strength
- Improved gloss and excellent transparency
- Very low influence on taste & odour
|
BorPure™ RB501BF | 北美洲 |
RB501BF is a random copolymer
CAS-No.: 9010-79-1
Applications
RB501BF has been developed especially for applications like:
- Food packaging
- Label film
- Over wrap film
- Shrink film
Additives
RB501BF contains no slip, antiblock, antistatic additives or nucleating additives
Additives Content
Calcium stearate Yes Borealis Method
Special features
- Excellent processability
- High oxygen barrier properties
- Excellent optical properties
- Very good oil and fat resistance
- High moisture barrier properties
- Good shrink performance
|
BorPure™ RD226CF | 北美洲 |
RD226CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
CAS-No.: 9010-79-1
Applications
RD226CF is recommended for:
- Food packaging
- Textile packaging film
- Stationary films
- Flower packaging
- Lamination films
Additives
RD226CF contains antiblock and slip agents
Additives Content
Antiblock (SiO2) 1800 ppm Borealis Method
Slip (EAA) 1000 ppm Borealis Method
Slip (OAA) 1000 ppm
Calcium stearate Yes Borealis Method
|
BorPure™ RD266CF | 北美洲 |
RD266CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
Applications
RD266CF is recommended for:
- Food packaging
- Stationary films
- Lamination films
- Textile packaging film
- Flower packaging
Additives
RD266CF is a slip, antiblock and antistatic formulated resin.
|
BorPure™ RE216CF | 北美洲 |
RE216CF is a random copolymer
This grade is suitable for the manufacturing of unoriented films on chill roll processes.
Applications
RE216CF is recommended for:
- Lamination films
- Stationary films
- Food packaging
- Textile packaging film
- Flower packaging
Additives
RE216CF contains antiblock but no slip agent
|
BorPure™ RG466MO | 北美洲 |
BorPure RG466MO is a specially modified high MFR transparent polypropylene random copolymer based on proprietary Borealis Nucleation Technology (BNT), with an excellent organoleptic performance. No tainting of taste & odour of food products and a faster crystallization speed offer benefits towards all parts of the value chain. It is designed for high-speed injection moulding and contains nucleating and demoulding additives.
CAS-No. 9010-79-1
Applications
- Closures
- Lids
- Pails
- Square containers
Special features
- Excellent organoleptic properties
- Very good transparency
- Good stiffness and impact balance
- Excellent antistatic properties
|
BorPure™ RJ377MO | 北美洲 |
BorPure RJ377MO is a specially modified high MFR transparent polypropylene random copolymer based on proprietary Borealis Nucleation Technology (BNT), with an excellent organoleptic performance. No tainting of taste & odour of food products and a faster crystallization speed offer benefits towards all parts of the value chain. It is designed for high-speed injection moulding and contains nucleating and demoulding additives.
CAS-No. 9010-79-1
|
BorPure™ RJ766MO | 北美洲 |
BorPure RJ766MO is a specially modified high MFR transparent polypropylene random copolymer based on proprietary Borealis Nucleation Technology (BNT), with an excellent organoleptic performance. No tainting of taste & odour of food products and a faster crystallization speed offer benefits towards all parts of the value chain. It is designed for high-speed injection moulding and contains nucleating and demoulding additives.
Applications
- Pails
- Square containers
- House ware and thin wall packaging
- Closures
Special Features
- Excellent organoleptic properties
- Very good transparency
- Good stiffness and impact balance
|
Borseal™ TD220BF | 北美洲 |
Borseal TD220BF is a C2/C4 terpolymer
This grade is designed for sealing layers of oriented and non oriented films
|
Borstar® NJ200AI | 北美洲 |
Borstar NJ200AI is a 20% natural fibre filled polypropylene compound intended for injection moulding.
This material has an excellent stiffness and gives a good surface quality.
Applications
Borstar NJ200AI has been developed especially for the car industry to be used in automotive interior parts.
Special Features
- Sustainable, renewable and European sourced Filler
- Excellent gloss and scratch
- Balancing cost, weight, performance and sustainability
- Light weight
|
Daplen™ BB077UBB | 北美洲 |
Daplen BB077UBB is a polypropylene compound intended for injection moulding.
|
Daplen™ BD020AIB | 北美洲 |
Daplen BD020AIB is a polypropylene compound intended for injection moulding.
Applications
- Crates and boxes
- Washing machine parts
Special features
- Very good stiffness and impact balance
- Excellent surface finish
|
Daplen™ ED117AE | 非洲和中东 |
Daplen ED117AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and gives a good surface quality.
Applications
Daplen ED117AE has been developed especially for the car industry to be used in automotive exterior parts.
- Bumpers
- Automotive exterior applications
Special features
Daplen ED117AE has been designed especially for outstanding paint adhesion.
- Excellent performance in the steam jet test
- Suitable for applications, which require low expansion over a broad temperature scale
|
Daplen™ ED306UBB | 北美洲 |
Daplen ED306UBB is a 30% mineral filled polypropylene compound intended for injection moulding.
|
Daplen™ EE103AE | 非洲和中东 |
Daplen EE103AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness, gives a good surface quality and is easy to process.
Applications
Daplen EE103AE has been developed especially for the car industry to be used in automotive exterior parts.
- Bumpers
- Exterior trims
Special Features
- Suitable for applications, which require low expansion over a broad temperature scale
- High flowability allowing to mould complex-structured parts with very high "flow path / wall thickness ratios"
- Available with and without UV-stabilisation
|
Daplen™ EE103AEB | 北美洲 |
Daplen EE103AEB is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding.
Applications
Daplen EE103AEB has been developed especially for the car industry to be used in automotive exterior parts.
- Bumpers
- Exterior trims
Special features
- Suitable for applications, which require low expansion over a broad temperature scale
- High flowability allowing to mould complex-structured parts with very high "flow path / wall thickness ratios"
- Excellent balance in stiffness and impact resistance
|
Daplen™ EE108AE | 非洲和中东 |
Daplen EE108AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding.
|
Daplen™ EE108U | 非洲和中东 |
Daplen EE108U is a 10% mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness, gives a good surface quality and is easy to process.
Applications
Daplen EE108U has been developed especially for applications like:
- Body side mouldings
- Bumpers
- Exterior trims
Special features
- UV stabilised
- High flowability allowing to mould complex-structured parts with very high "flow path / wall thickness ratios"
- Excellent Scratch resistant
- Excellent surface appearance on unpainted and grained parts
|
Daplen™ EE112AE | 北美洲 |
Daplen EE112AE is a mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material provides excellent paintability, very good impact/stiffness balance and low thermal expansion.
Applications
Daplen EE112AE has been developed especially for the automotive industry and is suitable for applications like:
- Bumpers
- Automotive exterior applications
Special Features
- Primerless paintable allowing optimisation of painting cycle time and reduction of system cost
- Low thermal expansion over a broad temperature scale for zero-gap applications
Low density with good impact/stiffness balance enabling weight reduction
|
Daplen™ EE158AI | 北美洲 |
Daplen EE158AI is a 13% mineral filled elastomer modified polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness, gives a good surface quality and is easy to process.
Applications
Daplen EE158AI has been developed especially for the car industry to be used in automotive interior parts.
- Dashboards
- Trunk claddings
- Pillar trims
- Other automotive interior parts
- Door panels and pockets
Special Features
- Excellent scratch resistance
- High dimensional stability
- No tendency to show stickiness after outdoor exposure
|
Daplen™ EE158AIB | 北美洲 |
Daplen EE158AIB is a 13% mineral filled polypropylene compound intended for injection moulding.
Applications
Daplen EE158AIB has been developed especially for the car industry to be used in automotive interior parts.
- Dashboards
- Door panels and pockets
- Automotive interior applications
Special features
- High scratch resistance
- No tendency to show stickiness after outdoor exposure
|