INNOPOL ® CS 1-7830 HGF is a 30 % glass-fibre-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-7830 HGF is recommended to be used for applications where the required properties are high strength and stiffness besides long term heat stability.

INNOPOL ® CS 1-7830 HL is a 30 % glass-fibre-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-7830 HL is recommended to be used for applications where the required properties are high strength and stiffness besides long term heat stability.

INNOPOL ® CS 1-8000 is a polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-8000 is highly suitable for manufacturing indoor waste water discharge systems where the required properties are high strength, high stiffness and chemical resistance.

INNOPOL ® CS 2-1000 is a polypropylene block-copolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-1000 is developed for producing injection moulded automotive components.

INNOPOL® CS 2-2000 TO is a polypropylene block-copolymer based compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 2-2000 TO is developed for producing injection moulded automotive components, where the required properties are good stiffness and processability besides excellent low-temperature impact resistance.

INNOPOL® CS 2-2110 is a 10% talc-filled compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-2110 is developed for producing injection moulded automotive components.

INNOPOL® CS 2-2120 is a 20% talc-filled compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-2120 is developed for producing injection moulded automotive components.

INNOPOL ® CS 2-2130 T25 is a 25% talc-filled compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-2130 T25 is developed for producing injection moulded components.

INNOPOL® CS 2-2130 TA is a 30% talc-filled compound based on polypropylene block- copolymer. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 2-2130 TA is developed for producing injection moulded components.

INNOPOL® CS 2-2513 MF is a mineral, micro-fibre filled, elastomer modified compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 2-2513 MF is developed for producing injection moulded automotive interior components where the required properties are good stiffness and impact resistance besides excellent scratch resistance at a lower density.

INNOPOL ® CS 2-2910 WF is a 10% wood fibre filled polypropylene block-copolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-2910 WF is recommended for producing injection moulded products, where the required properties are excellent processability besides good stiffness.

INNOPOL ® CS 2-3000 B is a polypropylene block-copolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-3000 B is developed for producing injection moulded automotive painted exterior components.

INNOPOL® CS 2-3000 TO is a polypropylene block-copolymer based compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 2-3000 TO is developed for producing injection moulded automotive components, where the required properties are good stiffness besides excellent low-temperature impact resistance.

INNOPOL® CS 2-3000 is a polypropylene block-copolymer compound. This grade is available in nature and custom coloured form. INNOPOL® CS 2-3000 is developed for producing injection moulded automotive component

INNOPOL® CS 2-3110 TO BU is a 10% talc-filled, black coloured and UV-stabilized compound based on polypropylene block-copolymer. INNOPOL® CS 2-3110 TO BU is developed for producing injection moulded automotive components, where the required properties are the good stiffness and excellent impact resistance.

INNOPOL® CS 2-3120 BPLU 9H0017 is a 20% talcum filled, UV stabilised compound based on polypropylene block-copolymer.

INNOPOL CS 2-3120 MO is a 20 % talcum filled compound based on polypropylene block- copolymer. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 2-3120 MO is developed for producing injection moulded automotive components.

INNOPOL CS 2-3120 OL is a 20 % talcum filled compound based on polypropylene block- copolymer. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 2-3120 OL is developed to produce injection moulded automotive components for interior applications.

INNOPOL® CS 2-3130 is a 30 % talc-filled polypropylene block-copolymer compound / PP-B TD30 (ISO 1043)/. This grade is available in nature and custom coloured form.

Product description INNOPOL ® CS 2-3302 TO BU is an elastomer modified, UV-stabilized compound based on polypropylene block-copolymer. Recommended application INNOPOL ® CS 2-3302 TO BU is developed for producing injection moulded automotive components.

INNOPOL® CS 2-4120 is a 20% talc-filled compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form as well. INNOPOL® CS 2-4120 is developed for producing injection moulded components.

INNOPOL ® CS 2-4610 FR is a flame retarded polypropylene block-copolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-4610 FR is developed for producing injection moulded parts, where the requested flame retardancy is V2 (UL-94)

INNOPOL® CS 2-4630 FR is a flame retarded polypropylene block-copolymer compound. This grade is available in nature and custom coloured form. INNOPOL® CS 2-4630 FR is recommended for producing injection moulded products, where the required properties are excellent flame retardancy (V0) besides balanced physical properties.

INNOPOL ® CS 2-5000 is a polypropylene block-copolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-5000 is developed for producing injection moulded automotive components.

INNOPOL ® CS 2-5512 is 10 % calcium-carbonate filled and 10 % elastomer-modified polypropylene block-copolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-5512 is developed for producing injection moulded components, where the required property is high stiffness besides low- temperature resistance.

INNOPOL® CS 2-5830 SA is a 30 % glass-fibre-filled polypropylene block-copolymer compound. This grade is available in nature and custom coloured form.

INNOPOL® CS 2-7120 is a 20 % talc-filled polypropylene block copolymer compound / PP-B TD20 (ISO 1043)/. This grade is available in nature and custom coloured form.

INNOPOL ® CS 2-8000 is a polypropylene block-copolymer. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-8000 is highly suitable for pipe manufacturing where the required property is high impact resistance besides good stiffness.

INNOPOL® CS 2-8302 is an elastomer modified compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-8302 is developed for extrusion of sheets, profiles and for blow moulding of different bottles.

INNOPOL ® CS 2-8940 BA42 GU 7035 is a grey coloured, UV-stabilized, 42% Barium-sulphate filled compound based on polypropylene block-copolymer. Recommended application INNOPOL ® CS 2-8940 BA42 GU 7035 is developed for production of pipe systems, where the required properties are the good noise insulation besides a good UV-light resistance.

INNOPOL ® CS 2-8960 BA60 is a 60% Barium-sulphate filled compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-8960 BA60 is developed for extrusion of pipes, sheets, profiles where one of the required properties is a good noise insulation.

INNOPOL® CS 2-9000 MA is a high melt flow copolymer with antistatic additivation. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 2-9000 MA is developed for producing injection moulded automotive components.

INNOPOL® CS 2-9000 OL is a high melt flow nucleated, UV-stabilized polypropylene copolymer compound. This grade is available in black and custom colour form. Recommended application INNOPOL® CS 2-9000 OL is developed for producing injection moulded automotive components especially for interior applications.

INNOPOL ® CS 2-9000 is a polypropylene block-copolymer based compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-9000 is developed for producing injection moulded components.

INNOPOL® CS 2-9120 SR is a 20% talc-filled compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-9120 SR is developed for producing injection moulded automotive components.

INNOPOL® CS 2-9301 is an elastomer modified compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-9301 is developed for producing injection moulded automotive components

INNOPOL® CS 2-9302 is an elastomer modified compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-9302 is developed for producing injection moulded automotive components.

INNOPOL® CS 2-9522 T15SR is a 15% mineral-filled, elastomer-modified compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 2-9522 T15SR is developed for producing injection moulded automotive interior- components where the required property is a good scratch resistance besides excellent processability.

INNOPOL® CS 2-9523 is a 20% talc-filled, elastomer modified compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-9523 is developed for producing injection moulded automotive components.

INNOPOL® CS 2-9524 is a 20% talc-filled, elastomer modified compound based on polypropylene block-copolymer. This grade is available in nature and custom coloured form. INNOPOL® CS 2-9524 is developed for producing injection moulded automotive components.