Light weight household and disposable articles

Household articles less hard and less rigid than I1

Transport and stacking crates, particular bottle crates

Milk bottles and shakers for power

Tick walled, highly stressed transport containers, e.g. refuse bin and fish crates, screw caps and cable clips.

For disinfectant bottles up to 2 liters. Tubes for cosmetics, containers up to 10 liters and petrol cans up to 5 liters.

Containers with capacities ranging from a few ml up to 10 also for thermoforming. Also for production of sheets for thermoforming.

Wire and cable insulation

Stretched films and tapes for production of high quality knitted and woven.

Tapes to be used for agricultural packaging and as protective cover.

Monofilament for fishing notes, geo textiles and civil engineering.

For hollow articles where high stress cracking resistance is not demanded, such as bottles and containers up to 10 liters, e.g. for fabric softeners.

High quality PE-80 pressure pipe for gas and water transportation (natural grade).

High quality PE-80 pressure pipe for gas and water transportation (natural grade).

Large containers above 5L capacity and for the production of semi-finished stock.

Large containers above 10L capacity and for the production of semi finished stock.

General purpose grade for containers from 1L to 200L capacity

For blown films with paperlike quality, suitable for counter bags, carrier bags and wrapping film, excellent processing with high tenacity.

For blown films with paperlike quality, suitable for counter bags, carrier bags and wrapping films, excellent processing.

For blown films with paperlike quality, suitable for counter bags, carrier bags and wrapping films, excellent processing and sealability.

For blown films with paperlike quality, suitable for counter bags, carrier bags and wrapping films, excellent processing stiffer than HM 9450 F.

For blown films with paperlike quality, suitable for counter bags, carrier bags and wrapping films, excellent processing, stiffer than HM9450 F1.

Leading PE-100,specially for drinking water (blue marker)

Top quality PE-100 pressure pipes for gas and water transportation at higher pressures or with thinner walls as PE-80(natural grade).

ARMCRP100B are high molecular weight high density polyethylene copolymers, developed as general purpose resin for use in pressure and non-pressure pipes. A minimum service life of 50 years is achievable under appropriate pressure and temperature conditions. ARMCRP100B offer excellent chemical resistance and environmental stress crack resistance. ARMCRP100B will provide excellent resistance to effects of ultra violet light exposure in outdoor applications. ARMCRP100B are suitable for use in transport of a wide range of fluids for industrial, rural and mining applications. Suitability for use in any application should be determined by appropriate performance testing. * ARMCRP100B are suitable for food contact.

EX3 (M5010T2N) is high molecular weight, high density polyethylene copolymers, developed as general purpose resin for use in pressure and non-pressure pipes. A minimum service life of 50 years is achievable under appropriate pressure and temperature conditions. EX3 (GM5010T2N) offer excellent chemical resistance and environmental stress crack resistance. EX3 (GM5010T2N) is suitable for extrusion into a full range of pipe and fittings sizes, where high density resins are required. EX3 (GM5010T2N) is suitable for use in transport of a wide range of fluids for industrial, rural and mining applications. Suitability for use in any application should be determined by appropriate performance testing. * EX3 (GM5010T2N) is suitable for food contact.

EX3B (GM5010T2) is a black, high molecular weight high density polyethylene copolymer, developed as a general purpose resin for use in pressure & nonpressure pipes. A minimum service life of 50 years is achievable under appropriate pressure & temperature conditions. EX3B (GM5010T2) offers excellent chemical resistance & environment stress crack resistance and will provide excellent resistance to the effects of ultra-violet light exposure in outdoor applications. EX3B (GM5010T2) is suitable for extrusion into a full range of pipe & fitting sizes, where high density, resins are required. EX3B (GM5010T2) is suitable for use in the transport of a wide range of fluids for industrial, rural & mining applications, including potable water. Suitability for use in any application should be determined by appropriate performance testing. * EX3B (GM5010T2) is suitable for food contact.

Heavy duty and High ESCR application.

High flow applications, Houseware, Food packaging.

UV stabilized for thin component, such as houseware and toys

Thin wall injection application, housewares, caps and closures.

Ropes, nets, knitted sacks, woven fabrics.

Housewares, boxes and closures.

BD24250AA is a linear low density polyethylene copolymer containing butene-1 as a co-monomer. BD24250AA is suitable for high flow injection moulding applications such as house wares, boxes and closures. The superior stress crack resistance makes it particularly good for caps and closures. * BD24250AA is suitable for food contact.

Tanks, containers and silos up to 30000 liters, technical parts, agricultural application.

HD2840UA is a linear, UV stabilized virgin medium density polyethylene copolymer grade (MDPE), with a narrow molecular weight distribution. Characteristics: - High stiffness. - Good impact stress. - Whiteness. - UV stabilized. - Good Stress Cracking Resistance. - Excellent process-ability. - Excellent internal and external surface finish. Typical applications are: - Rotational moulded items with good stiffness, such as: Septic tanks and Ordinary containers. - Injection moulded technical parts and closure. * HD2840UA is suitable for food contact.

HD3840UA is a linear, UV stabilized virgin medium density polyethylene copolymer grade (MDPE), with a narrow molecular weight distribution. Characteristics: - High stiffness. - Good impact stress. - Whiteness. - UV stabilized. - Good Stress Cracking Resistance. - Excellent process-ability. - Excellent internal and external surface finish. Typical applications are: - Rotational moulded items with good stiffness, such as: Septic tanks and Ordinary containers. - Injection moulded technical parts and closure. * HD3840UA is suitable for food contact.

HD5050EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection moulding applications where a good environmental stress-cracking resistance is required. Characteristics: - Good environmental stress cracking resistance. - Good impact strength. - Good weathering resistance. Typical applications are: - Caps & closures. - Technical mouldings. - Bins. - Crates, boxes, household items. * HD5050EA is not suitable for organoleptic applications.

HD5050UA is an ultra-violet light stabilised high density polyethylene copolymergrade with a narrow molecular weight distribution, specially developed forinjection moulding applications where a good resistance to environmental stress cracking is required. Characteristics: - Good environmental stress cracking resistance. - High impact resistance, especially at low temperatures. - Good weathering resistance. Typical applications are: - Large dustbins & pails. - Pallet boxes. - Caps & closures. - Fish crates. - Technical parts. * HD5050UA is suitable for food contact.

HD5211EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, suitable for a wide range of injection moulding applications. Characteristics: - Good flow. - Good impact strength. Typical applications are: - House wares. - Caps & closures. - Toys. - Pails. - Cartridges. * HD5211EA is not suitable for organoleptic applications.