J1007FA20 is a film grade Low Density Polyethylene (LDPE). It has been specially designed for easy processing on blown film plants. The grade is manufactured without any slip additive for lamination film application. The grade can be used alone or for blending in foam application for better melt strength.

These are film grades and can be processed easily on conventional blown film lines. J1020FS20 has been blended with necessary additives during manufacture to obtain good surface slip and easy open-ability. J1020FA20 is manufactured without any additive to facilitate adhesion during lamination. J1020FA20: - Slip: No - Antiblock: No

J1020FF20 is a natural Low Density Polyethylene (LDPE) resin for foam and film extrusion. It has very good melt strength which provides uniform cell structure, cell growth and stiffness in foam. The grade can be used for making foam using both physical and chemical blowing agents. It can be used for manufacturing films as well. It can be processed easily on conventional blown film lines. The grade is manufactured without any slip additive to facilitate adhesion during lamination.

J1020XA20 is a natural Low Density Polyethylene resin for Medium voltage cable insulation using direct peroxide addition. It is designed for easy processing on conventional cable extrusion lines. It does not contain any additive and is un-stabilized. Required amount of antioxidant must be added to achieve desired ageing performance.

These are blown film grades and can be extruded with considerable ease. J24FS040 has been blended with necessary additives during manufacture to obtain good surface slip and easy open-ability between two layers of the film. J24FA040: - Slip: No - Antiblock: No

These are blown film grades and can be extruded with considerable ease. J24FS040 has been blended with necessary additives during manufacture to obtain good surface slip and easy open-ability between two layers of the film. J24FS040: - Slip: Yes - Antiblock: Yes

JD22010 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), for Drip lateral applications. Drip laterals produced out of this grade has outstanding processability, tensile and elongation properties. This grade meets the requirements of material as per IS 12786: 1989 on 'Irrigation equipment-Polyethylene pipes for irrigation laterals-specification'. When incorporated with adequate quantity of carbon black as specified in clause 4.1 of IS 12786: 1989,the pipe made from this grade will meet the creep rupture stress requirement of PE-25 class. Additives details: - Heat Stabilizer: Yes

JE24065 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE), and designed for extrusion coating applications in blends with LDPE. Additives details: - Heat Stabilizer: Yes

JF18010 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants, but does not contain any slip or antiblock. This grade is designed for flexible packaging applications. It has excellent draw down characteristics with very good toughness, tensile strength and tear resistance. Additives details: - Slip: Nil - An/block: Nil - Heat Stabilizer: Yes

This is a butene based Linear Low Density Polyethylene grade with Optimum level of Antioxidants. This grade does not contain any slip or antiblock, designed for good processing on Blown & Cast Film lines with excellent balance of mechanical & optical properties. Additives details: - Heat Stabilizer: Yes

This is a Butene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants, slip and antiblock. This grade is designed for blown film applications. It has excellent draw down characteristics with very good toughness, tensile strength and tear resistance. Additives details: - Slip: Yes - Antiblock: Yes - Heat Stabilizer: Yes

JF19020 is a butene based Linear Low Density Polyethylene grade with Optimum level of Antioxidants, Slip and Antiblock, designed for good processing on Blown & Cast Film lines with balanced mechanical & optical properties. Additives details: - Slip: Yes - Antiblock: Yes - Heat Stabilizer: Yes

JLL36RA045 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants. This grade when blended with appropriate quantity of carbon black can withstand continuous exposure. This grade when pulverized into 20-30 mesh powder offers good processability. This grade has very good ESCR and balance of Impact and stiffness. JLL36RA045UV is a UV Stabilized version of JLL36RA045. JLL36RA045: - Heat Stabilizer: Yes - UV Stabilizer: No

JLL36RA045 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants. This grade when blended with appropriate quantity of carbon black can withstand continuous exposure. This grade when pulverized into 20-30 mesh powder offers good processability. This grade has very good ESCR and balance of Impact and stiffness. JLL36RA045UV is a UV Stabilized version of JLL36RA045. JLL36RA045UV: - Heat Stabilizer: Yes - UV Stabilizer: Yes

L60075 is a High Density Polyethylene (HDPE) grade suitable for injection moulding applications where good mechanical properties are essential with gloss, dimensional stability, good ESCR, required for technical mouldings like moulded crates, luggage shells, helmets, defence applications, etc. UV Stabilised version, L60075 is also available with recommended service life of more than 5 years. L60075 is suitable for applications where articles are exposed to sunlight e.g. soft drink crates, defence applications, helmets, paint pails, etc.

Relene LL24FA030 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE). It is designed for medium voltage insulation compounds for silane cross-linking process. The grade is designed with optimum level of antioxidants.

LL36RA045 is a Butene Comonomer based Linear Medium Density Polyethylene. This grade when blended with appropriate carbon black can withstand continuous exposure. LL36RA045 when pulverised into 20-30 mesh powder offers good processability. This grade has very good Environmental Stress Crack Resistance (ESCR) and a combination of hardness and impact strength. This grade contains normal dose of antioxidant.

LL36RA045UV is a Butene Comonomer based Linear Medium Density Polyethylene (LLDPE). This grade is stabilised with appropriate quantity of HALS to give a long service with continuous outdoor exposure with or without blending of any carbon black. LL36RA045UV when pulverised into 20-30 mesh powder offers good processability. This grade has very good Environmental Stress Crack Resistance (ESCR) and a combination of hardness and impact strength. This grade contains normal dose of AO and high dose of UV stabiliser.

M24200 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE) grade with narrow molecular weight distribution and optimum level of antioxidants. It offers excellent processability and is recommended as base resin for preparing masterbatch. It can also be used for producing injection moulded lids, containers, houseware & general purpose articles as this grade exhibits good flexibility and low warpage.

M24300 is a butene comonomer based Linear Low Density grade with narrow molecular weight distribution and optimum levels of antioxidants. It offers good fluidity and excellent processability, and is mainly recommended for preparing masterbatch. It can be also used for producing injection moulded lids, containers, houseware & general purpose articles as this grade exhibits good flexibility and low warpage.

M 26500 is a butene comonomer based Linear Low Density grade with narrow molecular weight distribution and optimum levels of antioxidants. It offers excellent processability and is mainly recommended for preparing masterbatch. This grade can also be used for producing injection moulded lids, containers, houseware & general purpose articles as it exhibits good flexibility, low warpage and good fluidity.

M60075 is a High Density Polyethylene (HDPE) grade suitable for injection moulding applications where good mechanical properties are essential with gloss, dimensional stability, good ESCR, required for technical mouldings like moulded crates, luggage shells, helmets, defence applications, etc.

Relene O18030 is an Octene based Linear Low Density Polyethylene grade with Optimum level of Antioxidants & without Slip & Anti block. The grade is designed for good processing on Cast Film lines with balanced mechanical & optical properties.

O19010 is an octene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidant, antiblocking agent, slip additive and polymer processing aid. The grade is designed to make blown film for ehavy duty applications and liquid packaging, where excellent seal through contamination, toughness, impact strength and tear resistance are desired.

O21010 is an octene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidant and polymer processing aid but without slip additive and antiblocking agent. The grade is designed for lamination film applications where good optical properties and adhesion to the substrate are required.

O35042, is a octene copolymer based Medium Density Polyethylene grade designed for rotational moulding applications. O35042 can be used for producing special products like automotive components, diesel fuel tanks, chemical tanks, manholes, insulated fish crates and pallets. Due to the octene comonomer and medium density of resin, articles exhivit excellent toughness, impact resistance and Environmental Stress Crack Resistance (ESCR).

Relene P4609 is a natural color grade for pipe extrusion. It possesses broad molecular weight distribution balancing processability and mechanical properties. This grade meets MFI and Density requirements of Material as per IS 4984:2016 for 'Polyethylene pipes for Water Supply - Specification'. The grade has good ESCR properties and suitable for blow molding applications also.

R 35042 is a Linear Low Density Polyethylene grade designed for rotational moulding applications. R 35042 can be used for producing chemical tanks, water storage tanks, loft tanks milk cans and pallets. Due to the medium density of resin, articles exhibit good toughness, impact resistance and Environmental Stress Crack Resistance (ESCR).

S42005 is a natural polyethylene grade recommended as a base resin for sheathing/ jacketing in jelly filled telecommunications cables. It is designed to provide excellent processing characteristics and formulated to offer superior physical / electrical insulation properties including good environmental stress crack resistance.

S46005 is a High Density Polyethylene grade suitable for sheathing/jacketing of optical fiber cables. This resin offers good mechanical properties and surface appearance during extrusion.

Relene X24065, is a Butene comonomer based Linear Low Density Polyethylene. This grade is designed for XLPE cable compounds. It offers superior Processability, ESCR and Abrasion resistance.