Akoaflex MR05 B30 is a compound based on Polybutene with unique characteristics and is highly compatible with Polypropylene (PP). Akoaflex MR05 B30 is available in free flowing pellet form.

Akoaflex MR05 B40 is a compound based on polybutene-1 (PB-1) plastomer and polypropylene radom copolymer with unique characteristics and is highy compatible with polypropylne (PP). Akoaflex MR05 B40 is available in free flowing pellet form.

Akoaflex MR05 P30 is a compound based Polybutene with unique characteristics and is highly compatible with Polypropylene (PP). Akoaflex MR05 P30 is available in free flowing pellet form.

Akoaflex MR05 P40 is a compound based on Polybutene with unique characteristics and is highly compatible with Polypropylene (PP).

Akoafloor PB 4235-1 ivory is a highly isotactic polyolefin homopolymer manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoafloor PB 4235-1 complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for extrusion into pipe and injection moulding into fittings for nonpotable heating water applications. Akoafloor PB 4235-1 is available in ivory colour in pellet form. Akoafloor PB 4235-1 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoafloor PB R 509 brown is a highly isotactic random copolymer manufactured from butene-1 monomer. The product provides good long term hydrostatic strength also at elevated temperatures combined with extremely high flexibility. Akoafloor PB R 509 complies with requirements specified in ISO 12230, DIN 16968/DIN 16969 for PB-1 pipe applications. The grade is typically used for under floor heating or surface cooling applications. Akoafloor PB R 509 is available in brown colour in pellet form. Akoafloor PB R 509 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoalit PB 4237 grey is a highly isotactic polyolefin homopolymer manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoalit PB 4237 complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for extrusion into pipe and injection moulding into fittings for potable hot and cold water distribution applications. Akoalit PB 4237 is available in grey colour in pellet form. Akoalit PB 4237 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoalit PB 4238 white is a highly isotactic polyolefin homopolymer manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoalit PB 4238 white complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for extrusion into pipe and injection moulding into fittings for potable hot and cold water distribution applications. Akoalit PB 4238 white is available in white colour in pellet form. Akoalit PB 4238 white may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoalit PB 4267 GREY is a premium highly isotactic polyolefin homopolymer manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoalit PB 4267 GREY complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for high-performance extrusion into pipe and injection moulding into fittings for potable hot and cold water distribution applications where improved organoleptic properties are required. Akoalit PB 4267 GREY is available in grey colour in pellet form. Akoalit PB 4267 GREY may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoalit PB 4268 white is a premium highly isotactic polyolefin homopolymer manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoalit PB 4268 complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for high-performance extrusion into pipe and injection moulding into fittings for potable hot and cold water distribution applications where improved organoleptic properties are required. Akoalit PB 4268 is available in white colour in pellet form. Akoalit PB 4268 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application

Akoalit PB DKG 300 is a glass fibre reinforced high flow polyolefin homopolymer manufactured from butene-1 monomer. It can be used where outstanding creep, high stiffness, low thermal expansion and property retention at elevated temperature are key requirements. The grade is typically used for fitting applications such as fitting bodies, support rings, etc. in combination with hot and cold potable water pipe installations. It provides improved surface aesthetic properties combined with excellent tensile and flexural creep performance. Akoalit PB DKG 300 is available in natural colour in pellet form. Akoalit PB DKG 300 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Akoalit PB R539 natural is a highly isotactic random copolymer manufactured from butene-1 monomer. The product provides good long term hydrostatic strength also at elevated temperatures combined with extremely high flexibility. The grade is typically used for inliners for potable water applications. Akoalit PB R539 is available in natural colour in pellet form. Akoalit PB R539 may not be used in the manufacture of pipe applications intended for sale or shipment to North America, without prior written approval by Seller for each specific product and application.

Icorene N3002 is a polybutene -1 homopolymer powder specifically designed for use as a layer adhesive. The powder is free flowing and easy to distribute using a scatter coating machine. This grade can be used in various applications as a hot melt adhesive. For example carpet backing or non woven layer lamination. It features very good adhesion to PP and PE polymer substrates and very low viscosity to give good flow around the fibres enabling superior mechanical adhesion.

Icorene N3012 is a powder version of polybutene -1 random copolymer with low ethylene content, specifically designed for use as a layer adhesive. The powder is free flowing and easy to distribute using a scatter coating machine. This grade can be used in various applications as a hot melt adhesive. For example carpet backing or tuft locking, non woven lamination. It features very good adhesion to PP and PE polymer substrates and very low viscosity to give good flow around the fibers enabling superior mechanical adhesion. MFI measured by ISO 1133-1 is 1200 g/10 minutes

Icorene N3025 is a powder version of polybutene -1 random copolymer with low ethylene content, specifically designed for use as a layer adhesive. The powder is free flowing and easy to distribute using a scatter coating machine. This grade can be used in various applications as a hot melt adhesive. For example carpet backing or tuft locking or non woven lamination. It features very good adhesion to PP and PE polymer substrates and very low viscosity to give good melt flow around the fibers enabling superior mechanical adhesion. Recycling of the finished PP carpet is possible due to the complete miscibility of the PB1 in PP polymer. MFR measured by ISO 1133-1 is 2500 g/10 minutes

Koattro KT MR05 is a plastomeric material based on Lyondellbasell technology with unique characteristics and is highly compatible with Polypropylene (PP). This product blended with PP enhances softness, elastic recovery, elongation at break and impact resistance whilst improving transparency and reducing stress whitening. Koattro KT MR05 is available in free flowing pellet form.

Polybutene-1 grade Koattro PB 0300M is a semi-crystalline homopolymer, which is used where creep, environmental stress crack resistance and elevated temperature performance are key requirements. This polymer is highly compatible with polypropylene due to its similar molecular structure. It is used to improve mechanical properties at elevated temperatures. It is less compatible in blends with polyethylene but it is still easily dispersible . It forms a 2 phase structure which is the basis of the seal peel technology for easy-opening packaging applications. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers.

Polybutene-1 grade Koattro PB0801M is a semi-crystalline homopolymer, which can be used where creep and environmental stress crack resistance and elevated temperature performance are key requirements. This polymers unique processing behaviour allows it to be used as a processing modifier (internal lubricant) in polyolefins and Thermoplastic elastomeric compounding applications. It can absorb high loads of filler. It allows to be used in masterbatch applications were an excellent pigment dispersion is a key requirement. Finally it is highly appreciated in hot melt adhesive applications for its high cohesive strength and excellent wetting behaviour towards non polar substrates.

Polybutene-1 grade Koattro PB M 0600M is a random copolymer of butene-1 with high ethylene content. Koattro PB M 0600M is primarily used as a blend component in woodworking, assembly and packaging hot melt adhesive (HMA) formulations and sealant compounds. It can be used in combination with a wide variety of non-polar resins and waxes and maintains good cohesive strength of the HMA and higher Shear Adhesion Failure Temperature (SAFT). Koattro PB M 0600M offers extended Open time, short Setting time and superior cleavage in HMA packaging applications. Koattro PB M 0600M enhances softness and flexibility and helps to reduce the amount of resin needed in HMA formulations. It is highly compatible with polypropylene.

Polybutene-1 grade Koattro PB M 1100M is a random copolymer of butene-1 with high ethylene content. Koattro PB M 1100M is primarily used as a blend component in hot melt adhesive (HMA) formulations and sealant compounds. It provides good cohesive strength of the HMA, higher Shear Adhesion Failure Temperature (SAFT) and can be used in combination with a wide variety of non-polar resins and waxes. ?Koattro PB M 1100M is used in carpet backing applications (Primary and Secondary backing), where it offers flexibility, high filler loading capability, recyclability and energy saving potential. Koattro PB M 1100M is also used as an adhesive layer in multilayer meltblown applications. It is highly compatible with polypropylene.

Polybutene-1 grade Koattro PB M 1200M is a random copolymer of butene-1 with low ethylene content. Koattro PB M 1200M is primarily used as a blend component in hot melt adhesive (HMA) formulations and sealant compounds. It provides good cohesive strength of the HMA, higher Shear Adhesion Failure Temperature (SAFT) and can be used in combination with a wide variety of non-polar resins and waxes. It offers high green strength in assembly applications and helps to reduce the amount of resin needed in a HMA formulation. Koattro PB M 1200M is used in carpet backing applications (Primary and Secondary backing), where it offers flexibility, high filler loading capability, recyclability and energy saving potential. It is also used as an adhesive layer in multilayer meltblown applications. It is highly compatible with polypropylene.

Polybutene-1 grade Koattro PB M 1500M is a random copolymer of butene-1 with high ethylene content. Koattro PB M 1500M is primarily used as a blend component in hot melt adhesive (HMA) formulations and sealant compounds. It provides good cohesive strength of the HMA, higher Shear Adhesion Failure Temperature (SAFT) and can be used in combination with a wide variety of non-polar resins and waxes. ?Koattro PB M 1500M is used in carpet backing applications (Primary and Secondary backing), where it offers flexibility, high filler loading capability, recyclability and energy saving potential. Koattro PB M 1500M is also used as an adhesive layer in multilayer meltblown applications. It is highly compatible with polypropylene.

Polybutene-1 grade Koattro PB M 2500M is a random copolymer of butene-1 with low ethylene content. Koattro PB M 2500M is primarily used as a blend component in hot melt adhesive (HMA) formulations and sealant compounds. It provides good cohesive strength of the HMA, higher Shear Adhesion Failure Temperature (SAFT) and can be used in combination with a wide variety of non-polar resins and waxes. It offers high green strength in assembly applications and helps to reduce the amount of resin needed in a HMA formulation. Koattro PB M 2500M is used in carpet backing applications where its very low viscosity enables good penetration into the structure enabling fiber bonding, but it also offers flexibility, high filler loading capability, recyclability and energy saving potential Its compatibility with polypropylene, makes a one-step recycling process design possible

Polybutene-1 grade Koattro PB M 8510M is a random copolymer of butene-1 with high ethylene content. Koattro PB M 8510M is primarily used as a blend component in woodworking and assembly hot melt adhesive formulations. It can be used in combination with a wide variety of non-polar resins and waxes and maintains good cohesive strength of the HMA and higher Shear Adhesion Failure Temperature (SAFT). Koattro PB M 8510M is also used to improve rheological properties in blends. It is highly compatible with polypropylene due to its similar structure. Koattro PB M 8510M is less compatible but still easily dispersible in blends with polyethylene. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its high shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers. Koattro PB M 8510M can also be used in Spunbond applications offering reduced bonding temperature.

Polybutene-1 grade Koattro PB M 8911M is a random copolymer of butene-1 with high ethylene content. Koattro PB M 8911M is primarily used as a blend component in woodworking and assembly hot melt adhesive formulations. It can be used in combination with a wide variety of non-polar resins and waxes and maintains good cohesive strength of the HMA and higher Shear Adhesion Failure Temperature (SAFT). Koattro PB M 8911M is also used to improve rheological properties in blends. It is highly compatible with polypropylene due to its similar structure. Koattro PB M 8911M is less compatible but still easily dispersible in blends with polyethylene. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its high shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers. Koattro PB M 8911M can also be used in Melt Blown and Spunbond applications offering reduced bonding temperature and improved softness.

Polybutene-1 (PB-1) grade Toppyl PB 8310M is a random copolymer of butene-1 with high ethylene content. This product is primarily used to modify sealing properties or mechanical properties of other polyolefins such as polypropylene or polyethylene. Toppyl PB 8310M is highly compatible with polypropylene due its similar molecular structure. It is less compatible in blends with polyethylene but it is still easily dispersible.

Purell KT MR07 is a plastomeric material based on Lyondellbasell technology with unique characteristics and is highly compatible with Polypropylene (PP). This product blended with PP enhances softness, elastic recovery, elongation at break and impact resistance whilst improving transparency and reducing stress whitening. Purell KT MR07 is available in free flowing pellet form.

Polybutene-1 (PB-1) grade Toppyl PB 0110M is a semi-crystalline homopolymer, which is used where creep, environmental stress crack resistance and elevated temperature performance are key requirements. This polymer is highly compatible with polypropylene due to its similar molecular structure. It can be used to improve mechanical properties at elevated temperatures. It is less compatible in blends with polyethylene but it is still easily dispersible. It forms a 2-phase structure which is the basis of seal peel technology for easy-opening packaging applications. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers.

Polybutene-1 (PB-1) grade Toppyl PB 8220M is a random copolymer of butene-1 with medium ethylene content. This grade is highly compatible with polypropylene due to its similar molecular structure, and it is used to modify the sealing behavior of PP based films: a typical example is its use to reduce the seal initiation temperature of BOPP sealing layers. The relatively slow kinetics of crystallization allow an excellent wetting behavior. Toppyl PB 8220M highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers. Toppyl PB 8220M can also be used in seal-peel application. Compared with Toppyl PB 8640M or Toppyl PB 8340M, in blown film seal-peel Toppyl PB 8220M provides better optical properties (haze and clarity) but with narrow sealing window.

Polybutene-1 (PB-1) grade Toppyl PB 8340M is a random copolymer of butene-1 with low ethylene content. In blends with PE polymers, it forms a separate, but well-dispersed phase. Its primary use is as a minority blend component in the seal layer of easy-opening packaging films, produced by cast film extrusion. A typical PE blend partner for Toppyl PB 8340M could be any ethylene homo-or copolymer in the melt index range of 2.0 to 8.0 g/10min. PB-1 is also highly compatible with polypropylene due to its similar molecular structure, and it can be used to modify PP sealing behavior or mechanical properties such as impact strength. PB-1 crystallizes slowly and is very shear sensitive in its flow behavior.

Polybutene-1 (PB-1) grade Toppyl PB 8640M is a random copolymer of butene-1 with low ethylene content. In blends with PE polymers it forms a separate but well-dispersed phase. Its primary use is as a minority blend component in the seal layer of easy-opening packaging films, produced by blown film extrusion. A typical PE blend partner for Toppyl PB 8640M could be any ethylene homo-or copolymer in the melt index range of 0.7 to 2.0 g/10min. Toppyl PB 8640M is also highly compatible with polypropylene due to its similar molecular structure, and it can be used to modify PP sealing behavior or mechanical properties such as impact strength. PB-1 crystallizes slowly and is very shear sensitive in its flow behavior.