PRIMACOR™ 1321 Copolymer is an ethylene acrylic acid copolymer suitable for extruded blown and cast film. PRIMACOR™ 1321 Copolymer has been specifically designed for use as an adhesive layer in composite films or sealant layer in flexible packaging structures. PRIMACOR™ 1321 Copolymer exhibits: - Good interlayer adhesion to PE and PA - Good optical properties - Excellent toughness and strength - Excellent environmental stress crack and product resistance - Good hot-tack and sealability - Insensitivity to moisture Applications: - Multilayer films - Food packaging Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 1410 Copolymer is an ethylene acrylic acid copolymer suitable for monolayer or coextrusion blown films. PRIMACOR 1410 Copolymer has been specifically designed for use as a heat seal or adhesive layer in composite films. PRIMACOR 1410 Copolymer exhibits: - Excellent hot tack and sealability - Excellent toughness and strength - Excellent crack resistance - Insensitivity to moisture - Good optical properties Applications: - Speciality and skin packaging - Multilayer films Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 1430 Copolymer is an ethylene acrylic acid copolymer that provides good sealability, hot tack and excellent adhesion to polar (foil, nylon, etc.) materials. It also provides excellent toughness, clarity and tear resistance. PRIMACOR™ 1430 Copolymer exhibits: - Adhesive layer of sealant layer in flexible packaging structures - For blown or cast film extrusion - Used where adhesion to nylon or foil is desired Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3002 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion coating and extrusion lamination. PRIMACOR 3002 Copolymer exhibits: - Excellent draw-down and edge stability - Excellent organoleptic properties - Excellent toughness and strength - Outstanding environmental stress crack and product resistance - Excellent hot-tack and sealability - Adhesion to paper, paperboard, metals and polyethylenes - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3003 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion coating and extrusion lamination. PRIMACOR 3003 Copolymer exhibits: - Excellent draw-down and edge stability - Excellent organoleptic properties - Excellent toughness and strength - Outstanding environmental stress crack and product resistance - Excellent hot-tack and sealability - Adhesion to paper, paperboard, metals and polyethylenes - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3004 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3004 Copolymer exhibits: - Excellent draw-down and edge stability - Adhesion to paper, paperboard, metals and polyethylenes - High performance sealant or tie layer - Excellent hot-tack and sealability - Excellent seal through contamination - Excellent product resistance - Excellent toughness and strength - Outstanding environmental stress crack and product resistance Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3150 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3150 Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Good heat sealability - Good draw-down - Excellent oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Cost effective sealant or tie resin for foil-based structures Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3330 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3330 Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Excellent hot-tack and sealability - Excellent toughness - Excellent oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Plastic tube laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3330A Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3330A Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Excellent hot-tack and sealability - Excellent toughness - Excellent oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Plastic tube laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives - Antiblock: No - Slip: No

PRIMACOR™ 3340 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3340 Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Excellent hot-tack and sealability - Good oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3440 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR™ 3440 Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Excellent hot-tack and sealability - Excellent toughness - Excellent stress crack resistance - Insensitivity to moisture - Designed specifically for high line speeds Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3460 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR™ 3460 Copolymer has been specifically designed for use as a sealant and adhesive layer in flexible packaging laminates and thin paper coating. PRIMACOR™ 3460 Copolymer exhibits: - Excellent heat sealability and hot tack - Excellent adhesion to metallic, paper and polyethylene substrates - Good stress crack resistance - Designed specifically for high line speeds and low processing temperature - Insensitive to moisture Applications: - Flexible packaging - Thin paper coating - Metallic substrate lamination Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3540 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR™ 3540 Copolymer exhibits: - Extrusion coating adhesive polymer - Enhanced adhesion retention Complies with: - US. FDA 21 CFR 177.1310(b) - EU. No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 4608 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR™ 4608 Copolymer has been specifically designed for use as a sealant and adhesive layer for flexible packaging and liquid packaging laminates. PRIMACOR™ 4608 Copolymer exhibits: - Excellent heat sealability and hot tack - Excellent adhesion to metallic, paper and polyethylene substrates - Excellent draw down - Good oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 4810 is an ethylene acrylic acid copolymer adhesive designed for use with metallic, cellulosic, glass and other substrates. In dispersion form, it is a binder for nonwoven fibers, including polypropylene, polyester, glass, nylon, and others.

PRIMACOR™ 5980I Copolymer is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other substrates. In dispersion form, it can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates. PRIMACOR™ 5980I Copolymer exhibits: - Dispersible in aqueous amines and alkali - “Clean” dispersion requires no salts, surfactants or solvents - Dispersions use existing waterbourne application equipment - Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent grease and oil resistance, water hold-out and excellent product resistance for flexible packaging applications - Low odor Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Nonwoven binding - Metal/paper coating Complies with: - US. FDA 21 CFR 177.1310(a)(2) Additives: - Antiblock: No - Slip: No

PRIMACOR™ 5985 dispersible polymer is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other polar substrates. In dispersion form, it can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates. PRIMACOR™ 5985 Copolymer exhibits: - Dispersible in aqueous amines and alkali - “Clean” dispersion requires no salts, surfactants or solvents - Dispersions use existing waterbourne application equipment - Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent grease and oil resistance, water hold-out, and excellent product resistance for flexible packaging applications - Low odor Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Nonwoven binding - Metal/paper coating Complies with: - US. FDA 21 CFR 177.1310(a)(2) Additives: - Antiblock: No - Slip: No

PRIMACOR™ 5986 Copolymer is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other substrates. It can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates. PRIMACOR™ 5986 Copolymer exhibits - Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent grease and oil resistance and excellent product resistance for flexible packaging applications Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Metal/paper coating Complies with: - US. FDA 21 CFR 177.1 310(a)(2) Additives: - Antiblock: No - Slip: No

PRIMACOR™ 5990I Copolymer is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other substrates. In dispersion form, it is a versatile binder for nonwoven fibers, including polypropylene, polyester, glass, nylon and others. PRIMACOR™ 5990I Copolymer exhibits - Dispersible in aqueous amines and alkali - Clean dispersion requires no salts, surfactants or solvents - Dispersion s use existing waterbourne application equipment - Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent water, grease and oil resistance - Low odor Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Nonwoven binding - Metal/paper coating Complies with: - US. FDA 21 CFR 177.1 310(a)(2) Additives: - Antiblock: No - Slip: No

PRIMACOR™ 5995 is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other substrates. In dispersion form, it is a versatile binder for nonwoven fibers, including polypropylene, polyester, glass, nylon, and others. PRIMACOR™ 5995 exhibits: - Dispersible in aqueous amines and alkali - “Clean” dispersion requires no salts, surfactants or solvents - Dispersions use existing waterbourne application equipment - Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent water, grease and oil resistance - Low odor Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Nonwoven binding - Metal/paper coating Complies with: - US. FDA 21 CFR 177.1 310(a)(2) Additives: - Antiblock: No - Slip: No

PRIMACOR™ 698 Copolymer is a medium acid copolymer offering enhanced adhesion vs. LDPE, and thus potential for reduced processing temperatures or processing without substrate or melt pre-treatments. PRIMACOR™ 698 Copolymer exhibits: - Good adhesion to metallic, paper and polyethylene substrates - Good heat sealability and hot-tack - Excellent draw-down - Low neck-in Complies with: - US. FDA 21 CFR 177.1310(b) - EU. No 10/2011 Additives - Antiblock: No - Slip: No

PRIMACOR™ IO 3701 is an ionomer of ethylene acrylic acid copolymer, and is designed for blown, cast, and extrusion coating for flexible packaging applications. PRIMACOR™ IO 3701 can provide excellent sealability in coextrusions with Nylon and other film structures. Ion Type - Zinc Ionomer.

PRIMACOR™ IO 3701S Ethylene Acrylic Acid Ionomer is designed for blown film, cast film, and extrusion coating for flexible packaging applications. It provides excellent sealability in coextrusions with nylon and other film structures. PRIMACOR™ IO 3701S exhibits: - Excellent sealant for use in cast film and extrusion coating Additives: - Antiblock: No - Slip: Yes - Roll Release: Yes

PRIMACOR™ IO 3702 is an ionomer of ethylene acrylic acid copolymer, and is designed for extrusion coating for flexible packaging applications. PRIMACOR™ IO 3702 can provide excellent sealability in coextrusions with Nylon and other film structures. Ion Type - Zinc Ionomer.

PRIMACOR™ IO 3801 is an ionomer of ethylene acrylic acid copolymer, and is designed for blown and cast for flexible packaging applications. PRIMACOR™ IO 3801 can provide excellent sealability in coextrusions with Nylon and other film structures. Ion type - Sodium Ionomer.

PRIMACOR™ IO 3802 is an ionomer of ethylene acrylic acid copolymer, and is designed for blown and cast for flexible packaging applications. PRIMACOR™ IO 3802 can provide excellent sealability in coextrusions with Nylon and other film structures. Ion type - Sodium Ionomer.