POLYPROPYLENE, HIGH MELT FLOW HOMOPOLYMER Profax 6231 is a polypropylene homopolymer for fibers and general purpose designed for extrusion and injection molding. The base resin in this product meets the requirements of the US Food and Drug Administration (FDA) contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Short cycles for better productivity - Ease of processing - High dimensional stability Typical Applications: - Monofilament and multifilament - Thin walled light/heavy containers - Caps and closures

Profax 6231N is a high melt flow homopolymer with a narrow molecular weight distribution designed for spundbond and continuous filament applications that require superior spinnability and finer fibers. This product can be used for thin-wall injection molding. Profax 6231N is available in pellet form. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Controlled molecular weight distribution - High melt flow for short injection cycles - Good processing stability - Excellent dimensional stability - Excellent stability for high speed fiber spinning Typical Applications: - Thin-wall injection - Caps - Fiber extrusión - Continuous filament

Pro-fax 6301 polypropylene homopolymer is available in spherical particle form. This resin is typically used for mixing with pigments and other additives to make polymer concentrates or masterbatches. Pro-fax 6301 has very minimal stabilization, which allows wide design latitude for compounders. Additional stabilization is required to protect the resin during melt processing and throughout its useful life. Please note that any additives compounded into this resin will require a re-assessment of its FDA status.

Pro-fax 6323 general purpose polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications. ASTM and ISO-based versions of the technical data sheet are available for Pro-fax 6323.

Pro-fax 6329 polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications and offers good resistance to aging at elevated temperatures in both wet and dry environments.

Pro-fax 6331 general purpose polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications.

Pro-fax 6331NW polypropylene homopolymer resin is nucleated for fasted crystallization; and features antistatic properties and is designed for injection molding. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - High rigidity - Faster molding cycles - Better clarity - Improved deflection temperature - Antistatic properties Typical Applications: - Toys - Housewares - Containers - Caps and closures

Profax 6431 is a general purpose homopolymer designed for extrusion of mono-oriented film (cast film); it does not contain slip and antiblock and exhibits good organoleptic properties, good stiffness and good clarity. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Good processing stability - Good Stiffness - Good organoleptic properties - Good clarity Typical Applications: - Cast films - Closures - Injection

Pro-fax 6523 general purpose polypropylene homopolymer resin is available in pellet form. ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 6523.

Pro-fax 7523 impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding applications and offers good cold temperature impact resistance. ASTM and ISO-based versions of the technical data sheet are available for Pro-fax 7523.

Pro-fax 7531 impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding and extrusion applications and offers good cold temperature impact resistance.

Pro-fax 7624 impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion applications and offers a very good stiffness/impact balance as well as an excelllent resistance to aging at elevated temperatures in both wet and dry environments.

Pro-fax 7823 fractional melt flow polypropylene copolymer is available in pellet form. This resin is typically used in extrusion applications and offers high melt strength and excellent impact resistance. ASTM and ISO-based versions of the technical data sheet are available for Pro-fax 7823.

Pro-fax 8523 very high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion or injection molding applications and offers excellent low temperature impact resistance. ASTM and ISO-based versions of the technical data sheet are available for Pro-fax 8523.

Pro-fax 8623 very high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion and injection molding applications and offers excellent cold temperature impact resistance. ASTM and ISO-based versions of the technical data sheet are available for Pro-fax 8623.

Pro-fax EP348T high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good cold temperature impact resistance.

Pro-fax EP349U high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good low temperature impact resistance.

Pro-fax EP390S high impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding applications and offers excellent cold temperature impact resistance.

Pro-fax EP445P fully formulated impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding applications and offers excellent cold temperature impact resistance and stiffness/impact balance.

Pro-fax EP494T polypropylene is available in pellet form. This resin is typically used in injection molding applications.

Pro-fax EP495K nucleated, very high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion or injection molding applications and offers excellent low temperature impact resistance.

Pro-fax EP501V high flow, impact polypropylene copolymer is available in pellet form. This resin is typically used in compounding applications.

Pro-fax EP545U high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good stiffness/impact balance.

Pro-fax EP549U high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good stiffness/impact balance.

Pro-fax EP611H high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion applications, including corrugated board, and offers very good stiffness/low temperature impact balance.

Pro-fax EP648R is an impact polypropylene copolymer available in pellet form. The resin is typically used in injection molding applications and offers excellent stiffness and medium impact.

Pro-fax EP649U high melt flow, impact polypropylene copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers a very good stiffness/impact balance.

Pro-fax EP713H nucleated high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion applications such as thermoforming, blow molding, and sheet extrusion.

Pro-fax EP713HA nucleated high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion applications such as thermoforming and sheet extrusion and offers good antistatic properties.

Pro-fax EP714K impact polypropylene copolymer is available in pellet form. This resin is typically used in thermoforming and sheet extrusion applications and offers excellent stiffness and good antistatic properties.

Pro-fax HP403G is a general purpose homopolymer with good heat resistance and high tensile strength. It is available in pellet form, and it is typically used in extrusion applications.

Pro-fax HP423M is a polypropylene homopolymer available in pellet form. This resin is typically used in cast film applications. It is formulated with slip additive.

HP423MX02 is a polypropylene homopolymer available in pellet form. This resin is typically used in cast film applications. It is formulated with slip additive.

Pro-fax HP525J is a polypropylene homopolymer typically used in the production of biaxially oriented polypropylene films (BOPP). The product is suitable for metallizable film, both as monolayer and in coextruded structures. It contains a standard processing stabilization but does not contain any slip, antiblocking agents and no Calcium Stearate is intentionally added. Pro-fax HP525J offers good optical, easy processing and very good film profile. Typical applications are BOPP packaging films and Solid Phase Thermoforming sheets.

Profax HP530L is a polypropylene homopolymer that contains a slip agent. HP530L presents good processability and is suitable for injection molding. Profax HP530L is used for caps and closures and is available in pellet form. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Good processability - With slip agent Typical Applications: - Injection - Caps and closures - Toiletries - Dispensing systems

Pro-fax HP553J is a low water carryover raffia and tape grade polypropylene homopolymer resin with a nominal MFR target of 3.5 g/10 min and good tensile strength. It is available in pellet form and is typically used in extrusion applications, including raffia, strapping, tapes, rope, twine and cordage.

Pro-fax HP659S polypropylene homopolymer is available in pellet form. This resin is typically used in spunbond and continuous filament applications that require superior spinnability, finer fibers and good color stability. Pro-fax HP659S is also used in extrusion coating and cast film applications. This product is produced with a catalyst system that does not include intentionally added phthalates.

Pro-fax HP749R is a polypropylene homopolymer nucleated for faster cycle times. It contains anti-stat and is available in pellet form. This resin is typically used in injection molding applications such as caps and closures, containers and housewares.

Pro-fax HP793R is a polypropylene homopolymer nucleated for faster cycle times. It contains anti-stat and is available in pellet form. This resin is typically used in injection molding applications such as caps and closures, containers and housewares.

Pro-fax PD702 polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications.