RECICLEX® 10RXPG370A is a sustainable polypropylene with 10% post-consumer recycled material. It is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. RECICLEX® 10RXPG370A polypropylene homopolymer, 30% reinforced compound with glass fiber. It shows a very high stiffness, keeping good impact strength at every range of temperatures. It also shows a low warpage and shrinkage behaviour. Applications - Automotive: under the bonnet parts subjected to severe mechanical stresses (Light housings, heat and ventilation housings, filters) - Technical parts, in general. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® CBIOPB196 is a bio-based polyolefin derived from the use of alternative raw materials coming from renewable and sustainable plastic waste as well as from the biodegradable fraction coming from industrial and municipal waste. It is certified by a mass balance methodology according to the requirements of the International Sustainability and Carbon Certification (ISCC PLUS). REPSOL RECICLEX® CBIOPB196 is a phthalate free very high fluidity heterophasic copolymer, intended for injection moulding applications. It shows a very high stiffness and excellent impact properties in a grade with a very high melt flow index value. In addition, it shows a good shrinkage performance which avoids warpage problems. It is a nucleated grade and also contains a special antistatic formulation which provides good long-term aesthetic appearance and easy demoulding, allowing to achieve faster cycle times. Applications The particular characteristics of REPSOL ISPLEN PB196K1M provide a grade with excellent balance of mechanical properties with very high stiffness and excellent impact properties, as well as a good dimensional stability. It is widely used in: • Pails • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Thin-walled containers for exhibiting food products: ice creams, fast food, dairy products... • Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CIRCPB150 is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRCPB150 is a phthalate free medium fluidity heterophasic copolymer, characterised by its good balance of properties: excellent impact strength, even at low temperatures, good stiffness and easy processability. Due to its excellent flow properties is very suitable to fill complex or large moulds with long flow paths. Applications The particular characteristics of REPSOL RECICLEX® CIRCPB150 offer a multi-purpose grade used for packaging and in a wide variety of appliance industries. Typical applications are: • Crates, containers, pails and buckets for domestic and industrial uses. • Tool boxes and organizers with integral hinge. • Battery boxes and other automotive components. • Appliance industries: stadium seats, flooring slats, farm equipments, toys, sports... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CIRCPB183 is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRCPB183 is a phthalate free nucleated and antistatic heterophasic copolymer. It is characterised by its excellent flow properties and good balance of mechanical properties: very high impact strength, even at low temperatures, and high stiffness. It is particularly intended for injection moulding applications used in the manufacture of thin wall articles. Also, the material has a very low tendency to warp and it is used in goods where dimensional stability is important. Applications The particular characteristics of REPSOL RECICLEX® CIRCPB183 make it suitable for applications in which very high impact strength at high fluidity is required as well as good processability: • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Trays and containers for cold storage of foodstuffs: ice creams, fresh vegetables, fruit processed... • Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... • Suitable for compounding-based preparations. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CIRCPB195 is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRCPB195 is a phthalate free very high fluidity heterophasic copolymer, intended for injection moulding applications. It is characterised by its very high stiffness and excellent impact properties in a grade with a high melt flow index value. It is a nucleated grade and, in addition, its special antistatic formulation provides good long-term aesthetic appearance and easy demoulding, allowing to achieve faster cycle times. Applications The particular characteristics of REPSOL ISPLEN PB195K3M provide a grade with excellent balance of mechanical properties with very high stiffness and excellent impact properties, as well as a good dimensional stability. It is widely used in: • Pails • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Thin-walled containers for exhibiting food products: ice creams, fast food, dairy products... • Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CIRCPB300 is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRCPB300 is a phthalate free very high fluidity and nucleated heterophasic copolymer. It is characterised by its excellent flow properties and good balance of mechanical properties: impact resistance and high stiffness. It is particularly suitable for injection moulding applications used in the manufacture of very thin walled articles where exceptional organoleptic properties are highly demanded. Articles made with it, exhibit a low tendency to warp, ultra light flow and high dimensional stability. Antistatic additive package also facilitates material processing and makes the articles extraction from the mould easier reaching shorter cycle times. Applications The specific characteristics of REPSOL RECICLEX® CIRCPB300 are particularly suitable for applications with very thin-walled articles as: • Containers for exhibiting food products: ice creams, dairy products... • Trays, boxes, cups and rounded containers for processed food. • Flowerpots, buckets, waste containers, lids, caps, cosmetic flasks... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

REPSOL RECICLEX® CIRCPB500K1M is a circular polyolefin in which post-consumer plastic waste has been used as an alternative raw material, ensuring the circularity of the materials. Grade certified under ISCC PLUS (International Sustainability and Carbon Certification) with mass balance methodology. REPSOL RECICLEX® CIRCPB500K1M is a phthalate free ultra high fluidity and nucleated heterophasic copolymer, intended for the manufacturing of thin wall articles due to its excellent balance of mechanical properties. It is particularly suitable for injection moulding applications where exceptional organoleptic properties are highly demand. Its antistatic additive package improves demoulding properties providing shorter cycle times and better aesthetic finished. Applications REPSOL RECICLEX® CIRCPB500K1M is specially designed for: • Thin wall containers with good behaviour at low temperatures: ice creams. • Trays, boxes, cups and rounded containers for processed food. • Household goods. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimised for each production line.

RECICLEX® PG170ZS is a sustainable polypropylene post-consumer recycled material. It is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. REPSOL RECICLEX® PG170ZS is a polypropylene homopolymer whit coupled fiber glass and filler mineral reinforced compound. It shows a high stiffness, keeping good impact strength at every range of temperatures. Applications • Automotive and structural parts: under the bonnet parts subjected to severe mechanical stresses (Light housings, heat and ventilation housings, filters) • Technical pieces in general. • Furniture

RECICLEX® PG180ZS is a polypropylene homopolymer with post-consumer recycled material, coupled fiber glass reinforced compound. It shows a high stiffness, keeping good impact strength at every range of temperatures. It also shows a low warpage and shrinkage behaviour. Applications • Automotive and structural parts. • Electrical housings, power tools. • Technical pieces in general. • Garden furniture. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® PG272AT grade is a sustainable grade of polypropylene copopolymer, 20% chemically coupled fiber glass reinforced compound, that incorporates 100% recycled material. It is a compound formulated by Repsol to enable the use of recyclate in technical injection molding applications through improved material compatibility and product consistency. It shows a very high stiffness, keeping good impact strength at every range of temperatures. It also shows a low warpage and shrinkage behavior. Applications - Automotive: under the bonnet parts subjected to severe mechanical stresses (Light housings, heat and ventilation housings, filters) - Technical parts, in general. - Electrical housings, power tools - Washing machines cylinders Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® PG370ZS is a polypropylene homopolymer post-consumer recycled material, coupled fiber glass reinforced compound. It shows a very high stiffness, keeping good impact strength at every range of temperatures. It also shows a low warpage and shrinkage behaviour. Applications • Automotive: under the bonnet parts subjected to severe mechanical stresses (Light housings, heat and ventilation housings, filters) • Technical parts, in general. • Garden furniture. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® PM270ZS801 is a sustainable polypropylene with mechanical post-consumer material. It is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. REPSOL RECICLEX® PM270ZS801 is a homopolymer 20% mineral fillers and medium melt flow rate. It has a standard stabilization, able to be used in the main applications. Carbon footprint The estimated carbon footprint of REPSOL RECICLEX® PM270ZS801 grade is 1,10 kgCO2/kgPP (''Cradle to gate''). Applications • Automotive: Heating and air conditioning units, structural parts • Technical parts, in general. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® PM274ZS801 is a sustainable polypropylene with mechanical post-consumer material. It is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. REPSOL RECICLEX® PM274ZS801 is a copolymer 20% mineral fillers and medium melt flow rate. It has a standard stabilization, able to be used in the main applications. Carbon footprint The estimated carbon footprint of REPSOL RECICLEX® PM274ZS801 grade is 1,48 kgCO2/kgPP (''Cradle to gate''). Applications • Automotive: Insertion, steps, structural parts • Technical parts, in general. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® RX591V is a sustainable polypropylene with 50% post-consumer recycled material. RECICLEX® RX591V is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. The estimated carbon footprint* of the grade RECICLEX® RX591V is 1,15 kgCO2/kg (medium value of PP in Europe according to Plastic Europe Ecoprofiles is 1,63 kgCO2/kg). Therefore, the carbon footprint reduction of the compound RECICLEX® RX591V is around 260 kg CO2/ton PP. * Repsol is working with its recycling suppliers and the certification entities to validate the value of carbon footprint. This product is UV stabilized and available in different colours. Applications The excellent balance in properties and appearance allow the manufacture of aesthetic applications with excellent surface finish: - Technical pieces, in general - Indoor and outdoor furniture, design and decorative elements - Flowerpots, buckets, storage organizers, waste containers, trays… Recommended melt temperature range from 190 to 250 ºC. Processing conditions should be optimized for each production line.

REPSOL RECICLEX® RXI52BG000 is a sustainable polypropylene compound with 50% of post-industrial recycled material. It has excellent mechanical properties especially great stiffness and high impact strength, even at low temperatures. REPSOL RECICLEX® RXI52BG000 is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. Carbon footprint The estimated carbon footprint of REPSOL RECICLEX® RXI52BG000 grade is 1,16 kgCO2/kgPP, 29% less than virgin PP (''Cradle to gate''). *Transport is not included. Applications Due to its optimal balance of properties the grade REPSOL RECICLEX® RXI52BG000 is especially suited for applications that require excellent mechanical properties, such as: • Boards and Profiles • Blow-molding • Sheet extrusion with high superficial shine. • Pipes. Recommended melt temperatures range between 190 and 250ºC. Processing conditions should be optimised for each production line.

RECICLEX® RXP29HY is a sustainable polypropylene compound with 25% of pre-consumer recycled material, which has been developed for easy processing in fiber extrusion lines. RECICLEX® RXP29HY is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials and product consistency. Applications • Indicated for the extrusion of staple fibre and BCF/CF. • Recommended for the production of technical nonwovens in spunbond lines. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® RXP39AT is a sustainable polypropylene compound with 30% of post-consumer recycled material. Carbon footprint The estimated carbon footprint of RECICLEX® RXP39AT grade is 1,40 kgCO2/kgPP, 10% less than virgin PP (''Cradle to gate''). Applications The particular characteristics of RECICLEX® RXP39AT permit the manufacture of articles that combine good toughness, excellent processability and good dimensional stability. It is widely used in: • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Thin-walled containers • Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® RXP50AT is a sustainable polypropylene compound with 50 % of post-consumer recycled material for injection applications. RECICLEX® RXP50AT is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. Carbon footprint The estimated carbon footprint of RECICLEX® RXP50AT grade is 1,17 kgCO2/kgPP, 30% less than virgin PP (''Cradle to gate''). Applications The mechanical properties and excellent stiffness allow the manufacture of articles that combine good toughness, excellent processability and good dimensional stability. It is widely used in: • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Thin-walled containers for non-food contact. • Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX RXP52BG is a sustainable polypropylene compound with 50% of post-consumer recycled material. It has excellent mechanical properties especially great stiffness and high impact strength, even at low temperatures. RECICLEX RXP52BG is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. Carbon footprint The estimated carbon footprint of RECICLEX® RXP52BG grade is 1,24 kgCO2/kgPP, 20% less than virgin PP (''Cradle to gate''). Applications Due to its optimal balance of properties the grade RECICLEX RXP52BG is especially suited for applications that require excellent mechanical properties, such as: • Boards and Profiles • Blow-molding • Sheet extrusion with high superficial shine. • Pipes. Recommended melt temperatures range between 190 and 250ºC. Processing conditions should be optimised for each production line.

RECICLEX® RXP52BI is a sustainable polypropylene compound with 50% of post-consumer recycled material for injection applications. RECICLEX® RXP52BI is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. Carbon footprint The estimated carbon footprint of RECICLEX® RX52BI grade is 1,29 kgCO2/kgPP, 20% less than virgin PP (''Cradle to gate''). Applications The excellent balance between stiffness and impact strength performs a grade widely used for technical components, transport systems and storage equipment: crates, suitcase shells, professional storage solutions, automotive components, battery boxes, buckets, waste and disposal management systems, industrial components (sports, leisure, electrical...) Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® RXP59AN is a sustainable polypropylene compound with 50% of post-consumer recycled material for injection applications. RECICLEX® RXP59AN is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. Carbon footprint The estimated carbon footprint of RECICLEX® RXP59AN grade is 1,24 kgCO2/kgPP, 20% less than virgin PP (''Cradle to gate''). Applications Good balance between stiffness and impact strength allows the manufacture of articles that combine good toughness, excellent processability and good dimensional stability. It is widely used in: • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Thin-walled containers for non-food contact. • Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® RXP59HY is a sustainable polypropylene compound with 50% of pre-consumer recycled material, which has been developed for easy processing in fiber extrusion lines. RECICLEX® RXP59HY is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials and product consistency. Applications • Indicated for the extrusion of staple fibre and BCF/CF. • Recommended for the production of technical nonwovens in spunbond lines. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® RXP80AT is a sustainable polypropylene compound with 82% of post-consumer recycled material for injection applications. RECICLEX® RXP80AT is formulated by Repsol to enable the use of recycling in technical applications through a better compatibility of materials. Carbon footprint The estimated carbon footprint of RECICLEX® RXP80AT grade is 0,78 kgCO2/kgPP, 50% less than virgin PP (''Cradle to gate''). Applications Good balance between stiffness and impact strength allows the manufacture of articles that combine good toughness, high Melt Flow Index with excellent processability and good dimensional stability. It is widely used in: • Domestic and leisure furniture. • Square boxes and round storage containers for consumer appliances. • Thin-walled containers for non-food contact. • Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® RXP96AG is a sustainable polypropylene compound with more than 98% of post-consumer recycled material for injection applications. Carbon footprint The estimated carbon footprint of RECICLEX® RXP96AG grade is 0,65 kgCO2/kgPP, 60% less than virgin PP (''Cradle to gate''). Applications Good balance between stiffness and impact strength performs a grade widely used for technical components and general injection moulding applications. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.

RECICLEX® RXP97AG is a sustainable polypropylene compound with more than 98% of post-consumer recycled material for injection applications. Carbon footprint The estimated carbon footprint of RECICLEX® RXP97AG grade is 0,65 kgCO2/kgPP, 60% less than virgin PP (''Cradle to gate''). Applications Good balance between stiffness and impact strength performs a grade widely used for technical components and general injection moulding applications. Recommended melt temperature range from 190 to 250ºC. Processing conditions should be optimized for each production line.