Medium viscosity PA6.6 with 30% glass bead reinforcement as well as heat stabilisation. For low warpage parts with balanced shrinkage.

30 % glass beads reinforced Polyamide 6.6, medium viscosity and with UV-stabilisation. Warpage-free, accurate dimensionally moulding parts, well balanced shrinkage characteristics.

30 % glass beads reinforced Polyamide 6.6, medium viscosity. Warpage-free, accurate dimensionally moulding parts, well balanced shrinkage characteristics.

Medium viscosity standard Polyamide 6.6, 30% glass fibre reinforced, good flowability, good impact resistance and heat stabilised. For all kind of moulding parts wirh high stiffness at good heat resistance.

Medium-viscosity standard quality, 30 % glass fiber reinforced, good flowability, good toughness and bright natural colour. For all kind of moulding parts with high stiffness.

Medium viscosity PA66, 40 % mineral reinforced, heat stabilized. For all kind of molded parts with high stiffness.

Medium viscosity PA6.6 with 15% PTFE chemically bonded and 30% glass fibre reinforcement heat stabilizied. For moulding parts with high stiffness and sliding movement.

Medium viscosity standard grade with 30% glass fibre reinforcement as well as heat stabilization and UV stabilization. For molding parts with high stiffness, good thermal stability.

Medium viscosity PA66 with 30% glass fibre reinforcement and hydrolysis stabilisation. Moulding parts of high rigidity and good heat resistance.

PA66 with medium viscosity, 50% glassfiber reinforced and UV resistant For moulding parts with very high stiffness at good thermal stability.

Standard quality PA 6.6, medium viscosity, 30% glassfiber reinforced. Moulding parts of high rigidity and good heat resistance.

Medium viscosity industrial quality, 30% glassfiber reinforced, heat and hydrolysis resistant. For moulding parts with high stiffness at good heat stabilisation.

Medium-viscosity 30 % glass fibre reinforced Polyamide 6.6, industrial grade. Stiff moulding parts, good stability at increased temperatures.

PA66 standard type with medium viscosity with well flowability. For deep flow short cycle time.

Medium viscosity Polyamide 6.6, good flowability and heat stabilisation. For long moulding parts, short cycletime, good demoulding.

Unfilled Polyamide 6.6, good flowability and impact strength. Good for long moulding parts, short cycle times and good demoulding properties.

Medium viscosity Polyamide 6.6 with good flowability, good toughness and heat stabilisation. For long flow paths, short cycle time with good release properties.

Medium viscosity Polyamide 6.6, good flowability, good impact strength. For long moulding parts, short cycletime, good demoulding.

Medium-viscosity, unfilled Polyamide 6.6 industrial grade, good flowability and good impact strength Industrial parts of different kind, good demoulding properties.

Dry impact resistant Polyamide 6.6, 30% glass fibre reinforced. For all kind of moulded parts, with high impact properties and stiffness.

Dry impact modified Polyamide 6.6 with very good flowability, good demoldability and heat stabilizer. For all kind of moulding parts with increased demand of impact resistance.

Dry impact modified Polyamide 6.6 with good flowability, good demoldability and heat stabilizer. For all kind of moulding parts with increased demand of impact resistance.

Dry impact-modified polyamide 6.6 with good flow and good mold release. For moulding parts with improved impact resistance requirements.

Dry impact unfilled Polyamide 6.6, good flowability and demoulding properties. For all kind of moulding parts with high impact resistance.

Dry impact modified Polyamide 6.6 with very good flowability and good demouldability. For all kind of moulding parts with increased demand of impact resistance.

Modified Polyamid 6.6, 30 % Glassfiber reinforced. For stiff and tough moulding parts.

Dry impact modified Polyamide 6.6 with good flowability and good demouldability. For all kind of moulding parts with increased demand of impact resistance.