GLS 130-117C BLACK is an easy processing, general purpose material designed for a wide variety of applications.

GLS 130-117C BLACK is an easy processing, general purpose material designed for a wide variety of applications.

GLS 137-093 (HL-5B) is a custom thermoplastic elastomer.

GLS 230-166C (Natural) is an easy processing, general purpose TPE designed for a wide variety of applications. - Non-Slip Grip - Overmold Adhesion to Polypropylene - Soft Touch, Rubbery Feel

GLS 230-166C is an easy processing, general purpose TPE designed for a wide variety of applications. - Non-Slip Grip - Overmold Adhesion to Polypropylene - Soft Touch, Rubbery Feel

GLS 248-031 (A140W) is a custom thermoplastic elastomer.

GLS 382-192 is a custom TPE compound

GLS 385-093 Silver is designed for overmolding onto a wide variety of substrates including PC, ABS, SAN, ASA, COPE. Product highlights - Bonds to a Variety Of Substrates - Rubbery Feel - Good surface Aesthetics - Soft Touch - Short cycle time - Good UV resistance

GLS 385-105 Grey is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Non-Slip Grip - Overmold Adhesion to Polypropylene - Soft Touch, Rubbery Feel

GLS 388-138 Natural is a TPE compound designed for consumer applications. And the compound is formulated based on hydrogenated styrenic block copolymers(SEBS).

GLS 393-058 Natural is designed for a wide variety of applications. - Non-Slip Grip - Overmold Adhesion to PC, ABS, PC/ABS, Copolyester. - Soft Touch - Rubbery Feel

GLS 422-126 is designed to pass several fatty food extraction conditions identified in EU Directive 10/2011 and may be appropriate where FDA and EU 10/2011 compliances are required. GLS 422-126 will also overmold and co-extrude to polypropylene.

GLS 425-072 Grey is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Non-Slip Grip - Overmold Adhesion to Polypropylene - Soft Touch, Rubbery Feel

GLS 433-021 is a custom material for the use of Gillette and its molders. - Custom Material

GLS 446-141D Graphite is a custom TPE compound

GLS 446-141D is a custom TPE compound.

GLS 450-078 TRANSLUCENT is a customized supersoft thermoplastic elastomer and targeted for healthcare application.

GLS 451-083 is an exceptionally clear, high performance TPE developed for medical tubing for healthcare. GLS 451-083 has been specially formulated without the use of any plasticizers. New Product. Commercial specifications have not been established. - Flexible - Formulated without plasticizers - High Clarity

GLS 451-121 is a general purpose TPE compound designed for various consumer markets. And the compound is formulated based on hydrogenated styrenic block copolymers(SEBS).

GLS AD7-010B is customized TPE designed for injection molding with good processability and short cycle time.

GLS 453-075 is a white speckle material. It has good bonding to PC, ABS, PC/ABS, PC/PETG, and PC/PBT

GLS 457-125 TRANSLUCENT is a customized grade

GLS 458-140 is an easy processing, general purpose TPE designed for a wide variety of applications, and may be appropriate where FDA and EU 10/2011 compliances are required. - Non-Slip Grip - Overmold Adhesion to Polypropylene - Soft Touch, Rubbery Feel

GLS 458-141 is an easy processing, general purpose TPE designed for a wide variety of applications, and may be appropriate where FDA and EU 10/2011 compliances are required. - Non-Slip Grip - Overmold Adhesion to Polypropylene - Soft Touch, Rubbery Feel

GLS 458-142 is an easy processing, general purpose TPE designed for a wide variety of applications, and may be appropriate where FDA and EU 10/2011 compliances are required. - Non-Slip Grip - Overmold Adhesion to Polypropylene - Soft Touch, Rubbery Feel

GLS 460-115C is a vibration damping thermoplastic elastomer for polypropylene overmolding, featuring improved compression set

GLS 467-036 Translucent is a general purpose TPE compound designed for various consumer markets, including like toys, personal and infant care related applications. It has dry and comfortable hand feeling.

GLS 467-080 is a translucent, overmold designed to adhere to multiple substrates. - Good bond to PC, ABS, PC/ABS - Rubber Feel

GLS 470-011 TRANSLUCENT is an easy processing, general purpose TPE designed for a wide variety of applications.

GLS 471-020 TRANSLUCENT is a general purpose TPE compound customized for various consumer markets. This material is formulated based on hydrogenated styrenic block copolymers (SEBS).

GLS 471-022 is a customized thermoplastic elastomer and targeted for healthcare and medical application.

GLS 471-041 is a customized thermoplastic elastomer and targeted for healthcare and medical application.

GLS 473-076 is a thermoplastic elastomer compound based on hydrogenated styrenic block copolymers.

GLS 475-044 thermoplastic elastomer compound is based on hydrogenated styrenic block copolymers. This compound is specially formulated to deliver good compression set performance at elevated temperatures and a high heat resistance.

GLS 476-079C is targeted for where blue jean stain resistance,high transparency,excellent UV stability, chemical resistance and silky feel are required. It can also overmold to a variety of substrates including PC, ABS and PC/ABS, and is primarily for phone cases, consumer electronics and consumer electronics accessories.

GLS 481-122 Natural is a custom TPE compound

Lab-Compound LC 484-067 is a white semi-hard plastomer made of thermoplastic elastomer and polyethylene. LC 484-067 will give adhesion when melt pressed on lackered metal, provided the lacker is a modified grade for polyethylene adhesion.

GLS 484-119 is based on styrenic blockcopolymer. This Compound is specially formulated to compliant to EU 10/2011, Code of Federal Regulations, Title 21 (CFR 21) "FDA" as well as to FDA medical device class I.

GLS 487-023 Rose Gold is designed for overmolding onto PC, ABS, PC/ABS with excellent performance in bonding, abrasion and processability.

GLS 487-048 Black is specifically designed to bond to a variety of standard and modified nylon materials, including those which are glass-filled, heat stabilized and/or impact modified. - Exceptional Colorability - Outstanding Adhesion in Both Two-Shot and Insert Molding Processes - Soft, Rubbery Grip - Very Easy to Process