4KFLEX SBS 70 Shore A black

FEATURES: A SBS Based Thermoplastic rubber compound natural in color for all extrusion applications featuring good chemical resistance and toughness

Injection & extrusion molding grade. For molded products with superior rigidity, and good surface appearance. It is supplied in pellet form. Containers, stationery goods, toys, and consumer goods.

Injection molding grade. For molded products with superior balance of high-level impact strength and rigidity, maximum transparency, and good surface appearance. It is supplied in pellet form. Food containers, cosmetics caps, pencil cases and other stationery goods, toys, swim goggle and other cases, consumer goods

Film and sheet grade. Styrenic resins modifier, for high impact strength. Small-quantity addition to GPPS (general-purpose polystyrene) for sheets with good hinge characteristics and films with good elongation characteristics. Inflation and sheet extrusion capability. It is supplied in pellet form. Blended with GPPS for PSP* laminated, blister packs, and other films. Also as modifier to heighten deep-drawing performance, for frozen dessert cups and lids, and transparent cold-drink cups.

Sheet grade. Blended with SC*, for highly transparent sheets. It is supplied in pellet form. Blended with SC* for transparent blister packs and other sheets, with GPPS for frozen dessert cups and other containers, and with GPPS/Tufprene™ to obtain PS sheets for food containers and other applications. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 815 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).

Injection- and blow-molding grade. For transparent products with superior impact strength. Blended with GPPS (general-purpose polystyrene) or SC*, for films with good thermal stability. Capability for profile-extrusion products. It is supplied in pellet form. Cosmetics caps, stationery goods, other consumer goods. Blended with GPPS for PSP* laminate films and IC magazine rails, and with SC* for shrink films. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 825 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS.

Film and sheet extrusion grade. Blended with SC*, for films with good balance of performance characteristics. Capability for inflation and sheet extrusion. It is supplied in pellet form. In blends with GPPS, for IC carrier tapes. In blends with SC, for shrink films. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 830 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).

Sheet extrusion grade. Blended with SC*, for sheets with high transparency and high impact resistance. It is supplied in pellet form. In blends with GPPS, for dessert cups. In blends with SC, for blister packs and shrink films with high transparency and high impact strength. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 835 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).

Injection molding, inflation molding, and sheet extrusion grade. Blended with GPPS (general-purpose polystyrene) or SC*, for products with well-balanced performance characteristics and good thermal characteristics. It is supplied in pellet form. In blends with GPPS, for PSP* laminate films. In blends with SC, for shrink films and other products. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 840 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS .

Sheet extrusion grade. Highly compatible with GPPS (general-purpose polystyrene), for sheets with superior balance of transparency and impact resistance. Superior processability, enabling production of deep-draw containers and other products. It is supplied in pellet form. In blends with GPPS, sheets for drink cups and food containers, and IC magazine rails. Used alone for gardening ampoules and other products.

High molecular weight, for enhanced adhesive characteristics in pressure-sensitive and other adhesives and heightened softening point in asphalts. It is supplied in crumb or powder form.

Low solution viscosity designed for pressure-sensitive and other adhesives modification. High level of processability in asphalt modification. It is supplied in crumb or powder form.

Specifically developed for superior characteristics and performance in asphalt blends. It is supplied in crumb form.

Specifically developed for superior characteristics and performance in pressure-sensitive and other adhesives, marked by good processability through low viscosity and a high level of balanced characteristics. It is supplied in pellet form.

Specifically developed for superior characteristics and performance in pressure-sensitive and other adhesives, marked by good processability through low viscosity and a high level of balanced characteristics. It is supplied in pellet form.

An SBS compound that can be direct injection molded to canvas without priming or adhesives.

Thermoplastic Elastomer as a standard injection moulding grade based on SBS Copolymer Overmoulding capability: Polypropylene (PP)

BTR620A, which includes the compounds of SBS resin with bamboo fiber, maintains the antibiosis and deodorization features of bamboo.This products have been successfully applied in handle coating and it also can be applied in shoes material and toys, like bassinet wheel, cushion and ects....

BTR630A, which includes the compounds of SBS resin with bamboo fiber, maintains the antibiosis and deodorization features of bamboo.This products have been successfully applied in handle coating and it also can be applied in shoes material and toys, like bassinet wheel, cushion and ects....

Calprene 401 is an 80/20 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a radial structure. This product is available in: C 401 porous crumb C 401M powder form dusted with amorphous silica APPLICATIONS: - Bitumen modification - Footwear - Mechanical rubber goods - Plastic modification

Calprene 405 is a 67/33 Butadiene/Styrene thermoplastic copolymer, polymerized in solution. It has a radial structure. This product is presented in porous crumb form, which gives good oil absorption. APPLICATIONS: - Footwear - Sportswear - Mechanical rubber goods - Bitumen modification

Calprene 411 is a 70/30 Butadiene/Styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in: C 411 porous crumb C 411C porous pellet C 411M powder form dusted with amorphous silica APPLICATIONS: - Bitumen modification - Footwear - Mechanical rubber goods - Plastic modification - Adhesives

Calprene 412 is a 69/31 Butadiene/Styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in: C 412 porous pellet C 412M powder form dusted with amorphous silica APPLICATIONS: - Bitumen modification - Plastic modification

Calprene 419 is a 70/30 Butadiene/Styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in: Calprene 419 porous crumb Calprene 419M powder form dusted with amorphous silica APPLICATIONS: - Bitumen modification - Footwear - Mechanical rubber goods - Plastic modification - Adhesives

Calprene 487 is a 45/55 Butadiene/Styrene thermoplastic copolymer, polymerized in solution. It has a radial structure and is extended with 40 phr of paraffinic oil. This product is presented in pellet form and has very adequate flow properties for compounding articles intended for injection. APPLICATIONS: - Footwear - Sportswear - Mechanical rubber goods

Calprene 500 is a 70/30 Butadiene/Styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is presented in pellet form and has excellent optical properties due to its clarity. It is stabilized with a non staining antioxidant system FDA approved for use in food contact applications and is essentially gel free with a very clear color. C-500 is used in adhesive formulation, in thermoplastic injected shoe sole formulations, and transparent compounds. APPLICATIONS: - Plastic modification - Adhesives - Footwear

Calprene 501 is a 69/31 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is available in: C 501 porous crumb C 501C porous pellet C 501M powder form dusted with amorphous silica APPLICATIONS: - Bitumen modification - Footwear - Mechanical rubber goods - Plastic modification - Adhesives

Calprene 540 is a 60/40 Butadiene/Styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is presented in pellet form and has excellent optical properties, due to its clarity. It is stabilized with a non staining antioxidant system FDA approved for use in food contact applications and is essentially gel free with a very clear color. C-540 is used in adhesive formulation, in thermoplastic injected shoe sole formulations, and transparent compounds. APPLICATIONS: - Plastic modification - Adhesives - Footwear

Calprene 701 is a new 69/31 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a linear structure. This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 701 is a BHT* and nonylphenol free SBS, especially suitable for food contact applications. Calprene 701 offers good mechanical properties and shows a very good yellow index behavior. Calprene 701 is supplied in porous crumb. *(BHT content in pure polymer less than 30ppm) APPLICATIONS: - Technical compounding - Plastic modification - Bitumen modification - Adhesives

Calprene 710 is a 70/30 linear structure butadiene/styrene thermoplastic copolymer, polymerized in solution. This product is presented in porous pellet form that allows rapid oil absorption. It is stabilized with a non-staining antioxidant system (free of TNPP), that is FDA approved for use in food contact applications. It is essentially gel free and very transparent. APPLICATIONS: - Plastic modification - Adhesives, sealing gaskets and coatings - Transparent compounds - Asphalt modification

Calprene is a new 70/30 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a radial structure. This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 711 is a BHT* and nonylphenol free SBS, FDA approved and especially suitable for food contact applications. Calprene 711 develops high viscosity compounds and requires being formulated with complementary antioxidants. (Consult our Technical Service Department for supporting information) Calprene 711 is supplied in porous crumb. APPLICATIONS: - Technical compounding - Plastic modification - Bitumen modification - Adhesives

Calprene 718 is a new 75/25 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a linear structure. This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 718 offers good processability and develops softer compounds when compared to other linear SBS grades. This grade has a 10% of diblock content. Calprene 718 is supplied in porous crumb. APPLICATIONS: - Technical compounding - Plastic modification - Adhesives

Calprene 719 is a new 70/30 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a radial structure. This product is stabilized with a non-stanining antioxidant system. Calprene 719 is a BHT* and nonylphenol free SBS, FDA approved and suitable for food contact applications. Calprene 719 is suplied in porous crumb. *(BHT content in pure polymer less than 30ppm) APPLICATIONS: - Technical compounding - Plastic modification - Adhesives

CELLIFF® (Microcell + Stiffness) Special high polymer materials are mixed for high degrees of hardness and tenacity. For producing stiff, light weight foaming boards which are tenacious and durable. The foam surface can be easily molded with patterns. - Pre-foamed blends of SBS with an engineering thermoplastic in pellet form - To be melt-processed-injection, extrusion or hot pressing - Used for making foamed boards or components. Features: - Closed microcellular structure - Shore D hardness - High impact resistance - Light weight - Stiffness / Toughness - Non-slip

CELLOMER® (Microcell + Elastomer) For hot-pressing or injection foaming boards featuring anti-slippage and elasticity. Having adjustable stiffness when mixed with MCC's other special high polymer materials. - Pre-formulated & pre-foamed SBS compounds in pellet - Can be melt-blended with compactable polymer for making foamed boards /articles by hot-pressing or infection - Varying hardness can be achieved with blends - Superior recyclability and melt processing behavior compared with EVA. Features: - Closed microcellular structure - Resilience / Elasticity - Non-toxic - Anti-slippage - Light weight - Flexibility - Highly elasticity & resilience.

CELLOMER® (Microcell + Elastomer) For hot-pressing or injection foaming boards featuring anti-slippage and elasticity. Having adjustable stiffness when mixed with MCC's other special high polymer materials. - Pre-formulated & pre-foamed SBS compounds in pellet - Can be melt-blended with compactable polymer for making foamed boards /articles by hot-pressing or infection - Varying hardness can be achieved with blends - Superior recyclability and melt processing behavior compared with EVA. Features: - Closed microcellular structure - Resilience / Elasticity - Non-toxic - Anti-slippage - Light weight - Flexibility - Highly elasticity & resilience.