C-19A is a silicone gum paste which contains platinum catalyst for addition cure. - C-19A, coupled with the proper crosslinker such as HC-101, is to be used to cure silicone compounds under addition cure system. Parts cured with this system have the following advantages: - Tight surface cure - No by-product generation during cure Applications: - Molded and extruded medical parts - Extruded conductive parts

C-19B is a silicone putty which contains crosslinker for addition cure. C-19B coupled with the proper platinum catalyst such as C-19A, is to be used to cure silicone compounds under addition cure system. Parts cured with this system have the following advantages: - Tight surface cure - No by-product generation during cure Typical Applications - Molded and extruded pharmaceutical parts. - Extruded conductive parts

HC-101 is a silicone putty which contains crosslinker for addition cure. - HC-101, coupled with the proper platinum catalyst such as C-19A, is to be used to cure silicone compounds under addition cure system. Parts cured with this system have the following advantages: - Tight surface cure - No by-product generation during cure Typical Applications - Molded and extruded pharmaceutical parts. - Extruded conductive parts

Shin-Etsu KE167-U is a phenyl (PVMQ) silicone compound. This product is designed for good low temperature characteristics. - A broad range of service temperatures from -100 to +260°C (-148 to +500°F.) Typical Applications - Leisure underwater glasses. - Leisure underwater goggles. - Low temperature gaskets

Shin-Etsu KE-1950-10 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-10 is low enough to allow easy pumping through most injection molding systems. - Rapid cure time at elevated temperature. Typical Applications - O-rings. - Diaphragms. - Capping. - Rubber rollers. - Connector packings. - Other electrical parts

Shin-Etsu KE-1950-30 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-30 is low enough to allow easy pumping through most injection molding systems. - Rapid cure time at elevated temperature. - Long pot life at room temperature. Typical Applications - O-rings. - Diaphragms. - Capping. - Rubber rollers. - Connector packings. - Other electrical parts

Shin-Etsu KE-1950-40 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-40 is low enough to allow easy pumping through most injection molding systems. - Fast cure rate for increased productivity. - Curable over a wide range of temperatures. - No catalyst by-products. Typical Applications - O-rings. - Diaphragms. - Capping. - Rubber rollers. - Connector packings. - Other electrical parts

Shin-Etsu KE-1950-50 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-50 is low enough to allow easy pumping through most injection molding systems. - Rapid cure time at elevated temperature. - Long pot life at room temperature. Typical Applications - O-rings. - Diaphragms. - Capping. - Rubber rollers. - Connector packings. - Other electrical parts

Shin-Etsu KE-1950-60 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-60 is low enough to allow easy pumping through most injection molding systems. - Rapid cure time at elevated temperature. - Long pot life at room temperature. Typical Applications - O-rings. - Diaphragms. - Capping. - Rubber rollers. - Connector packings. - Other electrical parts

Shin-Etsu KE-1950-70 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-70 is low enough to allow easy pumping through most injection molding systems. - Rapid cure time at elevated temperature. - Long pot life at room temperature. Typical Applications - O-rings. - Diaphragms. - Capping. - Rubber rollers. - Connector packings. - Other electrical parts

Shin-Etsu KE-2090-10 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-10 is low enough to allow easy pumping through most injection molding systems.

Shin-Etsu KE-2090-20 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-20 is low enough to allow easy pumping through most injection molding systems.

Shin-Etsu KE-2090-30 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-30 is low enough to allow easy pumping through most injection molding systems. - Selective self adhesion - Non adhesion to metals - Insert-molding and co-injection molding available

Shin-Etsu KE-2090-40 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-40 is low enough to allow easy pumping through most injection molding systems. - Selective self adhesion - Non adhesion to metals - Insert-molding and co-injection molding available

Shin-Etsu KE-2090-50 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-50 is low enough to allow easy pumping through most injection molding systems. - Selective self adhesion - Non adhesion to metals - Insert-molding and co-injection molding available

Shin-Etsu KE-2090-60 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-60 is low enough to allow easy pumping through most injection molding systems. - Selective self adhesion - Non adhesion to metals - Insert-molding and co-injection molding available

Shin-Etsu KE-2090-70 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-70 is low enough to allow easy pumping through most injection molding systems. - Selective self adhesion - Non adhesion to metals - Insert-molding and co-injection molding available

Shin-Etsu KE-2095-40 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2095-40 is low enough to allow easy pumping through most injection molding systems. - Selective self adhesion - Non adhesion to metals - Insert-molding and co-injection molding available

Shin-Etsu KE-2095-50 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2095-50 is low enough to allow easy pumping through most injection molding systems. - Selective self adhesion - Non adhesion to metals - Insert-molding and co-injection molding available

Shin-Etsu KE-2095-60 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2095-60 is low enough to allow easy pumping through most injection molding systems. - Selective self adhesion - Non adhesion to metals - Insert-molding and co-injection molding available

Shin-Etsu KE-3611 U is a black semi-conductive silicone compound. It has been designed as a 60 durometer material with typical volume resistivity values of 5 W -cm. - Suitable for both molding and extrusion. - Can be catalyzed with both peroxide and addition cure catalysts. Typical Applications - Key pads. - E M I gaskets.

Shin-Etsu KE-5006B U is a phenyl (PVMQ) silicone compound. This product is designed for good low temperature characteristics. - A broad range of service temperatures from -100 to +260°C (-148 to +500°F.) Typical Applications - Low temperature gaskets. - Low temperature packing.

Shin-Etsu KE-5006 U is a phenyl (PVMQ) silicone product. This product is designed for good low temperature characteristics. - A broad range of service temperatures from -100 to +260°C (-148 to +500°F.) Typical Applications - Low temperature gaskets. - Low temperature packing.

KE-541U is one of a series of easy processing, general purpose grade silicone rubber bases. It can be used in a variety of applications requiring finishing by molding or extruding with extending filler. - This product can be blended with KE-551U, KE-561U, KE-571U, and KE-581U for intermediate hardnesses. The choice between these bases will depend on specific requirements. Typical Applications - Roll covers. - Diaphragms. - O-rings and gaskets

KE-551U is one of a series of easy processing, general purpose grade silicone rubber bases. It can be used in a variety of applications requiring finishing by molding or extruding with extending filler. - This product can be blended with KE-541U, KE-561U, KE-571U, and KE-581U for intermediate hardnesses. The choice between these bases will depend on specific requirements. Typical Applications - Roll covers. - Diaphragms. - O-rings and gaskets.

Shin-Etsu KE-5530 U is a nominal 30 durometer phenyl (PVMQ) base. - This material was designed for its excellent vibration dampening characteristics. Because of its phenyl content, it also has excellent low temperature characteristics. Typical Applications - Electronic CD mounts. - Motor and engine mounts

Shin-Etsu KE-5540 U is a nominal 40 durometer phenyl (PVMQ) base. - This material was designed for its excellent vibration dampening characteristics. Because of its phenyl content, it also has excellent low temperature characteristics. Typical Applications - Electronic CD mounts. - Motor and engine mounts

Shin-Etsu KE-5550 U is a nominal 50 durometer phenyl (PVMQ) base. - This material was designed for its excellent vibration dampening characteristics. Because of its phenyl content, it also has excellent low temperature characteristics. Typical Applications - Electronic CD mounts. - Motor and engine mounts

Shin-Etsu KE-5551 U is a nominal 50 durometer base which offers high tensile and tear strengths. Its excellent processing characteristics make it suitable for molding, extrusion and calendaring - Minimum tear strength 168 ppi. - Translucent. Typical Applications - Gaskets. - Diaphragms. - Hose Stock.

Shin-Etsu KE-5560 U is a nominal 60 durometer phenyl (PVMQ) base. - This material was designed for its excellent vibration dampening characteristics. Because of its phenyl content, it also has excellent low temperature characteristics. Typical Applications - Electronic CD mounts. - Motor and engine mounts.

Shin-Etsu KE-5570 U is a nominal 70 durometer phenyl (PVMQ) base. - This material was designed for its excellent vibration dampening characteristics. Because of its phenyl content, it also has excellent low temperature characteristics. Typical Applications - Electronic CD mounts. - Motor and engine mounts.

KE-561U is one of a series of easy processing, general purpose grade silicone rubber bases. It can be used in a variety of applications requiring finishing by molding or extruding with extending filler. - This product can be blended with KE-541U, KE-551U, KE-571U, and KE-581U for intermediate hardnesses. The choice between these bases will depend on specific requirements. Typical Applications - Roll covers. - Diaphragms. - O-rings and gaskets.

KE-571U is one of a series of easy processing, general purpose grade silicone rubber bases. It can be used in a variety of applications requiring finishing by molding or extruding with extending filler. - This product can be blended with KE-541U, KE-551U, KE-561U, and KE-581U for intermediate hardnesses. The choice between these bases will depend on specific requirements. Typical Applications - Roll covers. - Diaphragms. - O-rings and gaskets.

KE-581U is one of a series of easy processing, general purpose grade silicone rubber bases. It can be used in a variety of applications requiring finishing by molding or extruding with extending filler. - This product can be blended with KE-541U, KE-551U, KE-561U, and KE-571U for intermediate hardnesses. The choice between these bases will depend on specific requirements. Typical Applications - Roll covers. - Diaphragms. - O-rings and gaskets.

KE-7021 U is intended for applications where excellent high heat resistance is required. - This product is intended for high temperature service as -55 ~+ 315 °C (-67 ~ +600 °F) Typical Applications - PPC Rollers.

KE-7022 U is intended for applications where excellent high heat resistance is required. - This product is intended for high temperature service as -55 ~+ 315 °C (-67 ~ +600 °F) Typical Applications - PPC Rollers.