BA110CF is a heterophasic copolymer. This grade is suitable for the manufacturing of unoriented film on blown film lines.

BA160E-8229-01 is an impact polypropylene heterophasic copolymer (block copolymer) with optimised mechanical properties, intended for injection moulding of compression pipe fittings and is coloured black The product features very good processability. It also shows excellent stress crack resistance and a good resistance to chemicals. BA160E-8229-01 is characterised by a combination of high stiffness and high impact strength, also at low temperatures. BA160E-8229-01 has a ß-crystalline molecular PP structure which improves the mechanical properties as well as the crystallisation temperature. This allows for cycle time reduction during injection moulding through higher demoulding temperatures and shorter cooling time. BA160E-8229-01 is classified as an MRS 8.0 material (PE80). The additive formulation is designed for appropriate durability

BA202E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high impact strength. BA202E is recommended for non-pressure pipes & fittings, thin-walled corrugated pipes and profiles.

BA204E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high impact strength. BA204E is recommended for non-pressure pipes & fittings, thin-walled corrugated pipes and profiles.

BB125MO is a heterophasic copolymer. This grade is a low melt flow rate grade intended for blow moulding and sheet extrusion, and features extremely good processability with improved melt strength and melt stability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This polymer is one of the IMP (improved mechanical stability) grades, and is characterized by very high stiffness without any loss of impact strength even at low temperatures. CAS-No.: 9010-79-1 Applications - Corrugated boards - Industrial chemicals Special features - Good melt strength - Very high stiffness - Good melt stability - High impact strength - Excellent stress crack resistance

BB213CF is a heterophasic copolymer. This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines.

BB412E is a natural, medium molecular weight, medium melt flow rate polypropylene block copolymer with an optimal mechanical properties balance resulting in high stiffness and very good impact strength both at room temperature and at low temperatures. Applications BB412E is recommended for pipe extrusion and injection moulding of fittings in the application field of: - Waste water discharge - Corrugated pipes - Cable conduit pipes - Corrugated boards - Sewerage BB412E is also recommended for conduits for electrical installations where conformity to EN 50086 is not mandatory.

BC245MO is a very stiff high impact polypropylene heterophasic copolymer intended for injection moulding. This grade is characterized by combination of good stiffness, good creep resistance and very high impact strength even at low temperatures. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This grade is mildly nucleated to maximize the mechanical stiffness. The additive formulation provides a smooth demoulding. Nucleation, good flow properties and high stiffness create a high potential for cycle time reduction. Its very good organoleptic properties allows this grade to be used with any masterbatch without discoloring problems.

BC250MO is a very high impact polypropylene heterophasic copolymer intended for injection moulding. This grade is characterized by combination of good stiffness, good creep resistance and very high impact strength even at low temperatures. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This grade is mildly nucleated to maximize the mechanical stiffness. The additive formulation provides a smooth demoulding. Nucleation, good flow properties and high stiffness create a high potential for cycle time reduction. Its very good organoleptic properties allows this grade to be used with any masterbatch without discoloring problems.

BC545MO is a low-blush polypropylene heterophasic copolymer. This grade features high impact strength, high thermal stability and very good processability. As all polypropylenes, this grade shows excellent stress-cracking and chemical resistances. This grade is characterized by combination of high stiffness, very high impact strength, low stress whitening and good electrical properties. This grade is mildly nucleated to maximize the stiffness-impact balance. The additive formulation provides long-term heat stability. Its very good organoleptic properties allows this grade to be used with any masterbatch without discoloring problems. Applications - Suitcases - Technical parts - Battery cases - Communication cables (UL 444) - Crates and boxes Special Features - Good processability - High stiffness - Good melt stability - High impact strength - Very good stress crack resistance - Good conductor adhesion - Very good chemical resistance - Dielectric properties

BC612WG is a polypropylene copolymer intended for injection moulding. The product is available in natural but other colours can be provided on request. This material has excellent balanced mechanical properties and is easy to process. Applications BC612WG has been developed especially for applications like: - Washing machine parts - Household applications - Dishwashers components Special Features - Long term high heat stabilised - UL registered under File E108112

BD212CF is a heterophasic copolymer. This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines.

BD310MO is a heterophasic copolymer. This grade is characterized by an optimum combination of good impact strength and very high stiffness. This grade is mildly nucleated to maximize the mechanical stiffness. This grade contains antistatic and demoulding additives which, together with enhanced nucleation, create a high potential for cycle time reduction. CAS-No.: 9010-79-1 Applications - General packaging - Crates - Technical parts Special features - Good impact strength - Excellent antistatic properties - High stiffness

BD712CF is a heterophasic copolymer. This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines. Applications BD712CF is recommended for - Food packaging - Stationary films - Lamination films - Label film Special features BD712CF is optimised to deliver: - Easy processability - High toughness - Excellent low temperature impact - Good seal strength

BD950MO is a heterophasic copolymer. This grade is intended for compression and injection moulding. The main features of this grade are good stiffness and impact resistance, very good processability, high melt strength and extremely low tendency to stress whitening. This grade uses Borealis Nucleation Technology (BNT) to increase productivity by cycle time reduction. As with all BNT grades, products exhibit excellent dimensional consistency with different colorants. In addition, this grade provides excellent creep resistance and optimum stiffness-impact balance. This polymer contains slip and antistatic additives to ensure good demoulding properties, low dust attraction and low friction coefficient which meets the industry standards for closure opening torques.

BE170CF is a heterophasic copolymer. This material has excellent balanced mechanical properties and is easy to process. It is suitable for injection moulding as well as for the production of non oriented cast films CAS-No. 9010-79-1

BE50 is a high molecular weight, low melt flow rate polypropylene homopolymer characterised by high stiffness, high heat distortion temperature and high resistance to thermal ageing. The product is available in natural colour. BE50 is recommended for non-pressure pipes and fittings, extruder sheets, solid rods, filter plates and other extrusion applications.

BE52 is a polypropylene homopolymer intended for blow moulding. The product is available in natural but other colours can be provided on request. This material has excellent balanced mechanical properties and is easy to process. Applications BE52 has been developed especially for applications like: - Washing machine parts Special Features - High heat stabilised - UL registered under File E108112

BE677AI is a polypropylene copolymer intended for injection moulding. This material has an excellent balance between impact strength and stiffness and gives a good surface quality. Applications BE677AI has been developed especially for applications like: - Pillar trims - Door panels and pockets Special Features - UV stabilised - High crystallinity

BEC5012 is a high molecular weight, low flow rate polypropylene block copolymer with very high impact strength. BEC5012 is recommended for non-pressure pipes and fittings, structured wall pipes and profiles and sheets.

BF335SA is a polypropylene copolymer intended for injection moulding. This material has a very high impact strength while maintaining good stiffness, gives a good surface quality and is easy to process. Applications BF335SA has been developed especially for applications like: - Vacuum cleaners Special Features - Excellent surface appearance - UL registered under File E108112 - Excellent antistatic properties

BG383MO is a polypropylene copolymer intended for injection moulding.This grade is characterized by optimum combination of high impact strength and stiffness. This grade uses Borealis Nucleation Technology (BNT) to increase productivity by cycle time reduction. BNT in combination with excellent stiffness and good flow properties creates a high potential for wall-thickness reduction. Products moulded with this grade exhibit excellent antistatic performance and very good mould release. As with all BNT grades, products exhibit excellent dimensional consistency with different colorants.

BH345MO is a heterophasic copolymer. This grade is characterized by optimum combination of very high stiffness, good flow properties and good impact strength. and is designed for high-speed injection moulding and contains nucleating and antistatic/demoulding additives. Components moulded from this grade show good ejectability and combine excellent stiffness with very good gloss, good antistatic and excellent organoleptic properties. CAS-No.: 9010-79-1 Applications - Thin wall containers - Household applications - Frozen food packaging - Technical parts - Closures - Pails Special features - Excellent antistatic properties - High stiffness - High impact strength - Good gloss

BH374MO is a heterophasic copolymer. This grade is characterized by optimum combination of very high stiffness, good flow properties and good impact strength. Products moulded with this grade exhibit excellent antistatic performance and very good mould release. This grade yields very good electrostatic charge half-time decay. Nucleation, good flow properties and high stiffness create a high potential for cycle time reduction. CAS-No.: 9010-79-1 Applications - Pails Special features - Superior flow behaviour . - High impact strength - High stiffness - Excellent antistatic properties

BH381MO is a heterophasic copolymer. This product is characterized by an optimum combination of very high stiffness and high impact strength. This grade uses Borealis Nucleation Technology (BNT) to increase productivity by cycle time reduction. BNT in combination with excellent stiffness and good flow properties creates a high potential for wall-thickness reduction. Products originating from this grade have very good demoulding properties, well-balanced mechanical properties, excellent dimension consistency with respect to different colors and good organoleptic properties. CAS-No. 9010-79-1

BHC5012C is a polypropylene copolymer intended for injection moulding, extrusion and blow moulding. This material has excellent balanced mechanical properties and is easy to process. Applications BHC5012C has been developed especially for applications like: - Heater housings - Break fluid reservoirs Special Features - Copper (Cu) stabilised

BHC6030 is a polypropylene copolymer intended for injection moulding, extrusion and blow moulding. This material has a very high impact strength while maintaining good stiffness and is easy to process. Applications BHC6030 has been developed especially for demanding applications in under the bonnet applications. - Heater housings - Break fluid reservoirs Special Features The product is available in black.

BJ100HP is a special low viscosity polypropylene compound developed to fit the production of PP-GF composites in the direct LFT compression and injection moulding process as well as in combination with LGF concentrates on the injection moulding process. The product is available in natural colour. Applications BJ100HP has been developed especially for applications like: - Front end carriers - Dashboard carriers - Under body shieldings - Battery supports - Door module carriers Special Features BJ100HP is equipped with an additive package for optimum coupling between polymer matrix and glass fibres. The interaction leads to optimum stiffness and impact strength of the components Long term high heat stabilised

BJ356MO is a heterophasic copolymer. This grade provides very high melt flow rate, very high stiffness and medium impact strength. and is designed for high-speed injection moulding and contains nucleating and antistatic/demoulding additives. Components moulded from this grade show good ejectability and combine excellent stiffness with very good gloss, good antistatic and excellent organoleptic properties. CAS-No. 9010-79-1

BJ368MO is a polypropylene copolymer characterized by good flow, and optimum combination of high stiffness and high impact strength. The material is nucleated with Borealis Nucleation Technology (BNT). Flow properties, nucleation and good stiffness give potential for cycle time reduction. The material have good antistatic performance and good mould release properties. Applications - Thin wall containers Special Features - stiffness and impact balance - Good flow behaviour - Reduced cycle time and increased output

BJ380MO is a very high melt flow heterophasic copolymer with high/medium impact strength and stiffness. This grade is designed for high-speed injection moulding and contains nucleating and antistatic additives. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low warpage. Components moulded from this grade have good demoulding properties and combine good stiffness, gloss and antistatic properties with good low-temperature impact strength. CAS-No. 9010-79-1

BJ400HP is a special low viscosity polypropylene compound developed to fit the production of PP-GF composites in the direct LFT compression and injection moulding process as well as in combination with LGF concentrates on the injection moulding process. The product is available in natural colour. Applications BJ400HP has been developed especially for applications like: - Front end carriers - Door module carriers - Under body shieldings - Dashboard carriers - Battery supports Special Features BJ400HP is designed especially for low emissions and organoleptic properties.

BJ998MO is a very high melt flow heterophasic copolymer with high/medium impact strength and stiffness. This grade is designed for high-speed injection moulding and contains nucleating and antistatic additives. The material is nucleated with Borealis Nucleation Technology (BNT). Flow properties, nucleation and good stiffness give potential for cycle time reduction. Components moulded from this grade have good demoulding properties and combine good stiffness, gloss and antistatic properties with good low-temperature impact strength. CAS-No. 9010-79-1

Daplen EE002AE is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour. This material has excellent balanced mechanical properties and gives a good surface quality. This grade is additionally available in an emission optimized version (Daplen EE002AE-AR) with the same technical properties. Applications Daplen EE002AE has been developed especially for the car industry to be used in automotive exterior parts. - Bumpers - Exterior trims - Automotive exterior applications

Daplen EE189HPB is a 16% mineral filled polypropylene compound intended for injection moulding. Applications Daplen EE189HPB has been developed especially for the car industry to be used in automotive interior parts. - Dashboards - Door panels and pockets Special features - Excellent stiffness and impact balance - No tendency to show stickiness after outdoor exposure - High scratch resistance

EF015AE is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour. This material has excellent balanced mechanical properties and gives a good surface quality. Applications EF015AE has been developed especially for applications like: - Bumpers - Spoilers - Exterior trims - Automotive exterior applications Special Features - Excellent surface appearance - High flowability

FR4850 is a halogen free flame retardant polypropylene compound for Primary Automotive Wire. Applications FR4850 is intended for use as a 125 °C rated primary insulation for automotive thin wall wires of 1.5 mm² or 16 AWG conductors and finer. Specifications FR4850 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - SAE J1128/J1127 - GMW15626 - Chrysler MS-12441 - Ford ES-AU5T-1A348-AA - ISO 6722

FR4852 is a halogen free flame retardant polypropylene compound for Primary Automotive Wire. Applications FR4852 is intended for use as a 125 °C rated primary insulation for automotive thin wall wires of 2,5 mm² or 14 AWG conductors and larger. Specifications FR4852 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - SAE J1128/J1127 - GMW15626 - Chrysler MS-12441 - Ford ES-AU5T-1A348-AA - ISO 6722

FSC65T30 is a 30% mineral filled polypropylene compound intended for injection moulding. Applications FSC65T30 has been developed especially for the car industry to be used in automotive interior parts. - Dashboard carriers - Air ducts - Other automotive interior parts

HA104E is a natural high molecular weight, high melt flow rate polypropylene homopolymer characterised by wellbalanced stiffness to impact strength ratio at increased processing properties. Applications HA104E is recommended for non-pressure pipes and fittings, structured wall pipes and profiles and sheets.