WR® 300 is a carbon-fiber reinforced compression molded PEEK™ often selected by pump manufacturers and users for pump bushings and case or impeller wear rings. Maximum service life is achieved in clean. lubricated and/or moist environments. WR 300 allows the pump user to increase pump effiency by running tighter wear ring clearances while decreasing potential pump damage when pumps are cavitated or experience radial bearing failures.

WR ® 525 is a thermoplastic composite consisting of carbon fiber in a PEEK matrix. Because of its unique thermal expansion properties, WR ® 525 is ideal for use as impeller wear rings, bushings and case wear rings. WR ® 525 allows the pump user to increase pump efficiency by running tighter wear ring clearances, while decreasing potential pump damage when pumps are cavitated or experience down-line bearing failures. WR ® 525 is API 610 approved for (stationary/stationary and rotating) wear applications.

Zeniva® ZA-500 L is a lubricated grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. This product meets the requirements of the current version of ASTM F 2026. Zeniva® ZA-500 L is offered as resin pellets and fabricated forms such as rods and plates. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). An FDA MAF is available.

Zeniva® ZA-500 is a grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. This product meets the requirements of the current version of ASTM F 2026. Zeniva® ZA-500 is offered as resin pellets and fabricated forms such as rods and plates. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). An FDA MAF is available and a PMDA MF is available in Japan.

Zeniva® ZA-500 is a grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. This product meets the requirements of the current version of ASTM F 2026. Zeniva® ZA-500 is offered as resin pellets and fabricated forms such as rods and plates. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). An FDA MAF is available and a PMDA MF is available in Japan.

Zeniva® ZA-520 is a grade of polyetheretherketone (PEEK) offered for use in implantable devices. This grade of Zeniva® PEEK is an Image Contrast grade, offering a level of opacity for imaging techniques such as MRI, CT and X-ray. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. The chemical, physical and mechanical properties of finished parts are related to the processes utilized in producing the finished part, for example, molding, machining, annealing, sterilization, etc. Zeniva® ZA520 is available in resin pellets and rods.

Zeniva® ZA-520 is a grade of polyetheretherketone (PEEK) offered for use in implantable medical devices. This grade of Zeniva® PEEK is an Image Contrast grade, offering a level of opacity for imaging techniques such as MRI, CT and X-ray. The manufacturing factily for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relaevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in an accredited lab that is ISO 17025 compliant. The chemical, physical and mechanical properties of finished parts are related to the processes utilized in producing the finished part, for example, molding, machining, annealing, sterilzation.

Zeniva ® ZA-550 L is a grade of polyetheretherketone (PEEK) offered for use in implantable devices. Zeniva ® ZA-550 L has been optimized for conversion into extruded filament for use in Fused Filament printers. The manufacturing facility for Zeniva ® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. Zeniva ® ZA-550 L is offered as resin pellets. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example; printing, molding, machining, annealing, sterilization, etc). An FDA MAF is available.

Zeniva® ZA-600 BK L is a lubricated grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). Zeniva® ZA-600 BK L is offered as resin pellets. An FDA MAF is available.

Zeniva® ZA-600 BK is a grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). Zeniva® ZA-600 BK is offered as resin pellets. An FDA MAF is available.

Zeniva® ZA-600 CF10 is a carbon-fiber reinforced grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). Zeniva® ZA-600 CF10 is offered as compounded pellets. An FDA MAF is available.

Zeniva® ZA-600 CF30 is a carbon-fiber reinforced grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). Zeniva® ZA-600 CF30 is offered as compounded pellets. An FDA MAF is available. In Japan, a PMDA MF is available.

Zeniva® ZA-600 L is a lubricated grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. This product meets the requirements of the current version of ASTM F 2026. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). Zeniva® ZA-600 L is offered as resin pellets. An FDA MAF is available.

Zeniva® ZA-600 is a grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. This product meets the requirements of the current version of ASTM F 2026. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). Zeniva® ZA-600 is offered as resin pellets. An FDA MAF is available.

Ketaspire® CF10 HC AM Filament incorporates 10% carbon fiber reinforcement into a PEEK matrix for increased strength offered for use in high-performance healthcare applications. This material provides long-term performance up to 240 °C, including exceptional chemical resistance. These properties make it particularly suited for metal replacement.

Ketaspire® CF10 LS1 AM Filament incorporates 10% carbon fiber reinforcement into a PEEK matrix for increased strength. This material provides long-term performance up to 240 °C, including exceptional chemical resistance. These properties make it particularly suited for metal replacement in critical applications in severe end-use environments, such as Oil & Gas, Aerospace and Automotive.

KetaSpire® KT-1211FP is a low melt flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural color fine powder form for compression molding and compounding uses in the health care industry. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties which include excellent wear resistance, best-in-class fatigue resistance, ease of melt processing, high purity, and excellent chemical resistance to organics, acids, and bases. KetaSpire® PEEK also complies with the ISO 10993 standard for use in medical applications. KetaSpire® KT-1211FP is well-suited as a raw material or material of construction for a variety of healthcare applications.

KetaSpire® KT-810 is an ultra-high molecular weight natural PEEK resin having a melt viscosity ranging from 0.51-0.65 kPa-s as compared to 0.38-0.50 kPa-s for standard high-viscosity PEEK grades such as KT-820. KetaSpire PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent chemical resistance to organics, acids and bases; exceptional retention of mechanical properties up to 240°C (464°F); best-in-class fatigue resistance; excellent wear resistance; ease of melt processing; and high purity. The KT-810 grade achieves a greater level of mechanical toughness than previously possible with PEEK, yet it is still processable by conventional methods including extrusion, injection molding, and compression molding. KetaSpire® KT-810 is particularly suited for compression molding applications such as machined parts and stock shapes wherein the inherent slow cooling rates of the process limit PEEK's toughness and often result in brittleness due to the higher crystallinity levels. The grade is available in two forms: fine powder with average particle size of approximately 50 micrometers (µm) for compression molding, and pellet form for extrusion and injection molding. The fine powder grade is designated KT-810FP while the pelletized product is available as KT-810 NT. - Fine Powder: KT-810 FP - Natural Pellet: KT-810 NT

暫定版データシート キータスパイア® KT-810 は超高分子量の未加工 PEEK 樹脂で、0.51 ～ 0.65 kPa-s の溶融粘度を有します。これに対し、KT-820 などの標準の高粘度 PEEK グレードの溶融粘度は 0.38 ～ 0.50 kPa-s です。キータスパイア PEEK は最高の工業規格に従って製造され、有機物、酸、および塩基に対する優れた耐薬品性、300 ℃までの機械特性の卓越した保持、比類なき耐疲労性、優れた耐摩耗性、容易な溶融加工、高い純度など、固有の特性を併せ持つことが特長です。KT-810 グレードはこれまでの PEEK よりも高いレベルの機械的強靱性を有しますが、押出成形、射出成形、圧縮成形などの従来の方法で加工できます。 キータスパイア® KT-810 は、加工に固有の低速冷却によって PEEK の強靱性が制限され、高い結晶化度レベルによって脆性が生じることの多い、部品や素材の機械加工などの圧縮成形用途に特に適しています。 このグレードには、圧縮成形用の平均粒子サイズ約 50 µm のファインパウダーと、押出成形および射出成形用のペレットの 2 つの形状があります。微粒パウダーグレードは KT-810FP と呼ばれ、白色のペレット製品は KT-810 NT として提供されています。 - ファインパウダー：KT-810 FP - ナチュラルペレット：KT-810 NT

キータスパイア® KT-820 CF30 は、流動性の低い 30% 炭素繊維強化グレードのポリエーテルエーテルケトン（PEEK）です。キータスパイア® PEEKは炭素繊維で強化されているため、300 ℃に近い温度での最大レベルの機械特性を有し、キータスパイア® 製品ファミリーの中で最小の熱線膨張係数を提供します。 キータスパイア® PEEK は最高の工業規格に従って製造されており、優れた耐摩耗性、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 これらの特性により、この樹脂はヘルスケア、輸送、電子部品、化学プロセス、その他の工業的利用の用途に適切です。

キータスパイア® KT-820 は、流動性の低い 13% ガラス繊維強化グレードのポリエーテルエーテルケトン（PEEK）です。ガラス繊維含有量は、強度および剛性と、耐衝撃性や破断時の伸びなど、強靱性に関する特性とのバランスが取れるように最適化されています。ガラス繊維の含有量が少ないと、対応する 30% ガラス繊維強化樹脂の処方よりも表面の美観が向上、異方性が軽減されます。 キータスパイア® PEEK は最高の工業規格に従って製造されており、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 このような特性により、石油・ガス回収、半導体製造、自動車、航空宇宙、ヘルスケア、化学プロセス、その他工業的利用の用途に適切です。 この樹脂は、未加工の状態では不透明のベージュから淡褐色です。 - ベージュ：KT-820 GF13 BG20

暫定版データシート キータスパイア® KT-820 GF15 は、流動性の低い 15% ガラス繊維強化グレードのポリエーテルエーテルケトン（PEEK）です。この樹脂は、非強化のキータスパイア® PEEK 樹脂よりも高い強度と剛性特性を提供します。ガラス繊維含有量は、強度および剛性と、耐衝撃性や破断時の伸びなど、強靱性に関する特性とのバランスが取れるように最適化されています。ガラス繊維の含有量が少ないと、対応する 30% ガラス繊維強化樹脂の処方よりも表面の美観が向上、異方性が軽減されます。 キータスパイア® PEEK は最高の工業規格に従って製造されており、優れた耐摩耗性、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 これらの特性により、この樹脂は石油・ガス、ヘルスケア、輸送、電子部品、化学プロセス、その他の工業的利用の用途に適切です。 - ナチュラル：KT-820 GF15 NT

キータスパイア® KT-820 GF30 は、流動性が中程度の 30% ガラス繊維強化グレードのポリエーテルエーテルケトン（PEEK）です。この樹脂は、非強化のキータスパイア® PEEK 樹脂よりも高い強度と剛性特性を提供します。強化により、特に 300 ℃に近い使用温度での構造体用途で優れた機械堅牢性も提供します。 キータスパイア® PEEK は最高の工業規格に従って製造されており、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 これらの特性により、この樹脂はヘルスケア、輸送、電子部品、化学プロセス、その他の工業的利用の用途に適切です。 ベージュ：キータスパイア® KT-820 GF30 BG20 Black: KetaSpire KT-820 GF30 BK95

キータスパイア® KT-820 NL は低流動性グレードの非強化ポリエーテルエーテルケトン（PEEK）で、潤滑剤無添加のナチュラル色のペレットで提供されます。キータスパイア® PEEK は最高の工業規格に従って製造されており、優れた耐摩耗性、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 これらの特性により、この樹脂はヘルスケア、輸送、電子部品、化学プロセス、その他の工業的利用の用途に適切です。 この樹脂は、コンパウンディング用のナチュラル色の粗パウダー、キータスパイア® KT-820P としても提供されています。 この樹脂の潤滑剤添加バージョンは、ナチュラル色（NT）または黒（BK 95）の KT-820 として提供されています。潤滑剤添加バージョンは、可塑化スクリューでのペレットの運搬に役立つステアリン酸カルシウム潤滑剤が少量付着しています（0.01% レベル）。

キータスパイア® KT-820 SL10 はポリエーテルエーテルケトン（PEEK）系コンパウンドで、標準の PEEK よりも高い潤滑性と低い摩擦を提供するように設計されています。耐摩耗性を提供するための処方を持つ他のグレードとは異なり、このグレードは高い潤滑性を提供しながら、高粘度の非変性 PEEK をしのぐ卓越した延性と強靱性を維持しています。また、この製品は高いメルトフローを提供するため、薄く入り組んだ、複雑な部品の射出成形が可能です。 このような他とは異なる特性に加えて、この樹脂は、PEEK で一般的な卓越した超高機能特性を併せ持っています。これらの特性には、高温における機械的強度および剛性、長期熱酸化安定性、耐疲労性、また酸、塩基、有機物を含む苛酷な化学環境での優れた耐薬品性などがあります。 このように魅力的な特性を併せ持つことから、キータスパイア® KT-820 SL10 は、輸送、電子部品、化学プロセス、また石油・ガス調査および製造など工業的利用の用途に適しています。

キータスパイア® KT-820 SL30 はポリエーテルエーテルケトン（PEEK）コンパウンドで、バランスの取れた優れた機械特性、耐摩耗性、および低い摩擦係数を乾燥した外部潤滑剤添加用途に提供します。この樹脂は、炭素繊維、グラファイト、ポリテトラフルオロエチレン（PTFE）で構成される三成分減摩／耐摩耗添加剤系を使用した処方です。 キータスパイア® PEEK は最高の工業規格に従って製造されており、優れた耐摩耗性、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 このような特性から、輸送、電子部品、化学プロセス、また石油・ガス調査および製造など工業的利用の用途に適切です。この樹脂の色は、未加工の状態で黒です。

キータスパイア® KT-820 SL45 は PEEK 系コンパウンドで、外部に潤滑剤を使用する用途で卓越した低い摩耗速度と良好な機械特性を提供するように特別に設計されています。

キータスパイア® KT-820 は低流動性グレードの非強化ポリエーテルエーテルケトン（PEEK）で、潤滑剤添加ペレットで提供されます。キータスパイア® PEEK は最高の工業規格に従って製造されており、優れた耐摩耗性、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 これらの特性により、この樹脂はヘルスケア、輸送、電子部品、化学プロセス、その他の工業的利用の用途に適切です。キータスパイア® KT-820 は、代表的な射出成形および押出成形加工を使用して容易に加工できます。この樹脂は、コンパウンディング用のナチュラル色の粗パウダー、キータスパイア® KT-820P としても提供されています。 KT-820 のペレットには、可塑化スクリューでのペレットの運搬に役立つステアリン酸カルシウム潤滑剤が少量付着しています（0.01% レベル）。対応する潤滑剤無添加のナチュラル色グレードの低流動性キータスパイア® は、KT-820 NL として提供されています。 - 黒：KT-820 BK 95 - ナチュラル：KT-820 NT

キータスパイア® KT-820FP は、低流動性グレードの非強化ポリエーテルエーテルケトン（PEEK）で、圧縮成形に適したナチュラル色のファインパウダーとして提供されます。 キータスパイア® PEEK は最高の工業規格に従って製造されており、優れた耐摩耗性、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 これらの特性により、この樹脂はヘルスケア、輸送、電子部品、化学プロセス、その他の工業的利用の用途に適切です。 この樹脂は、射出成形や押出成形用に、ナチュラル色のペレットのキータスパイア® KT-820 NT としても提供されています。

キータスパイア® KT-820P は低流動性グレードの非強化ポリエーテルエーテルケトン（PEEK）で、ナチュラル色の粗パウダーで提供されます。キータスパイア® PEEK は最高の工業規格に従って製造されており、優れた耐摩耗性、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 これらの特性により、この樹脂はヘルスケア、輸送、電子部品、化学プロセス、その他の工業的利用の用途に適切です。キータスパイア® KT-820P は押出成形コンパウンディング用です。このパウダーは、射出成形用のナチュラル色のペレット、KT-820NT としても提供されています。

KetaSpire® KT-820SFP is the low flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-colored, super-fine powder form. This super-fine PEEK powder is suitable for water-borne coatings, electrostatically driven powder coatings, and resin pre-impregnation of continuous fiber composites. This super-fine powder is produced to a median particle size D50 of about 30 micrometers. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent chemical resistance to acids, bases and a broad range of aggressive organic chemicals, best in class fatigue resistance, high thermal resistance, high purity and ease of melt processing. These properties make KT-820SFP well-suited for applications in health care, transportation, electronics, chemical processing and other industrial uses. The resin is also available in a natural-colored pellet form under the grade name KT-820 NT for injection molding and extrusion

KetaSpire® KT-820UFP is the low flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-colored, ultra-fine powder form. This ultra-fine PEEK powder is suitable for water-borne coatings, electrostatically driven powder coatings and resin pre-impregnation of continuous fiber composites. This ultra-fine powder is produced to a median particle size D50 of about 10 micrometers. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent chemical resistance to acids, bases and a broad range of aggressive organic chemicals, best-in-class fatigue resistance, high thermal resistance, high purity and ease of melt processing. These properties make KT-820UFP well-suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. The resin is also available in a natural-colored pellet form under the grade name KT-820 NT for injection molding and extrusion.

キータスパイア® KT-850 は中程度の流動性グレードの非強化ポリエーテルエーテルケトン（PEEK）で、ナチュラル色のペレットで提供されます。キータスパイア® PEEK は最高の工業規格に従って製造されており、優れた耐摩耗性、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 これらの特性により、この樹脂はヘルスケア、輸送、電子部品、化学プロセス、その他の工業的利用の用途に適切です。 - ナチュラル：KT-850 NT

キータスパイア® KT-850P は中程度の流動性グレードの非強化ポリエーテルエーテルケトン（PEEK）で、ナチュラル色の粗パウダーで提供されます。キータスパイア® PEEK は最高の工業規格に従って製造されており、優れた耐摩耗性、比類なき耐疲労性、容易な溶融加工、高い純度、また有機物、酸、および塩基に対する優れた耐薬品性など、固有の特性を併せ持っていることが特長です。 これらの特性により、この樹脂はヘルスケア、輸送、電子部品、化学プロセス、その他の工業的利用の用途に適切です。 キータスパイア® KT-850P は、代表的な射出成形および押出成形加工を使用して容易に加工できます。この樹脂は、ナチュラル色のペレットのキータスパイア® KT-850 NT としても提供されています。

KetaSpire® KT-851 NL SP resin is a depth-filtered grade of polyetheretherketone (PEEK) supplied in non-lubricated, natural-color pellet form and is specially designed for use in extruded wire insulation coating. KT-851 NL SP offers the needed balance of properties and processability for applying thin insulation coatings onto copper or other conducting wire using a continuous extrusion process to achieve a robust insulation coating that is capable of withstanding the harsh use environments of many industrial applications. The SP suffix denotes small pellets (2.25 mm diameter on average), which contributes to improved feeding and conveying in small extruders and other processing equipment. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent chemical resistance to organics, acids and bases, best in class fatigue resistance, excellent wear resistance, ease of melt processing and high purity. A lubricated form of this resin is available as KT-851 in natural color (NT). The pellets in the lubricated versions are supplied with a very light dusting (0.01%) of calcium stearate to aid with conveying through single screw extruder-based processing equipment.