High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

ULTEM 9085 resin is a polyetherimide blend. The material is designed for use in Aerospace cabin interiors but can also be used for FDM printing and in e.g. Rail applications. The material meets Aerospace FAR25.853 and OSU55/55 heat release requirements. It is approved by main Aerospace OEMs. Material has Rail EN45545 R6-HL3 rating. The material may offer excellent flow, stiffness and ductility balance, enabling thin wall lightweight designs. Material is opaque and can be custom colored. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.

High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing.

High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing.

High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing.

High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing. US FDA Food Contact compliant.

High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing. US FDA Food Contact compliant.

High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing. US FDA Food Contact compliant.

High flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 V0 Listing.

High flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 V0 Listing.

High flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 V0 Listing.

50% Glass fiber and mineral filled, high flow Polyetherimide blend with internal mold release and enhanced dimensional stability. ECO Conforming.

50% Glass fiber and mineral filled, high flow Polyetherimide blend with internal mold release and enhanced dimensional stability. ECO Conforming.

50% Glass fiber and mineral filled, high flow Polyetherimide blend with internal mold release and enhanced dimensional stability. ECO Conforming.

AUR200G0 is an unreinforced ULTEM recycle based grade.

AUR200G6 is a 30% glass fiber filled ULTEM Utility grade. The grade will have a limited color availability, dark gray to black. The data listed in this data sheet are the lower specification limits, apart from the MFR, CTE, HDT at 1.8 MPa, Density, Tensile strain, Water Absorption, Thermal Conductivity and Shrinkage which are typical data. The MVR of this material at 337 degrees C/6.7 kgf will have a specification between 3 and 7.5 (MFR: 4.2-10.5)

High flow Polyetherimide blend.

30% Milled glass filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

AUR210G6 is a 30% glass fiber filled grade based on ULTEM recycle.

High flow Polyetherimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (SABIC test method).

High flow Polyetherimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (SABIC test method).

High flow Polyetherimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (SABIC test method). Contains low level of mold release.

Transparent high flow Polyetherimide (Tg 217C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204C (SABIC IP method) ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

Transparent high flow Polyetherimide (Tg 217C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204C (SABIC IP method) ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

High flow Polyetherimide (Tg 217°C) with low level of transparent mold release. Very low outgassing and plateout for optimally reduced need for mold cleaning. May be beneficial for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204°C (SABIC IP method). ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

High flow Polyetherimide (Tg 217C) with internal mold release.. Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204C (SABIC IP method).

Transparent, Thermoplastic Polyimide (TPI). Glass transition Temperature (Tg) of 227degC. Haze onset temperature of 212degC (SABIC IP method). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required.

Transparent, Thermoplastic Polyimide (TPI). Glass transition Temperature (Tg) of 227degC. Haze onset temperature of 212degC (SABIC IP method). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required.