Revolve M-681 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-686 is a fully formulated rotomoulding resin especially suitable for large tank applications. Additionally this grade carries WRC approval for potable water applications (Cert No. 0311501) and it is designed to meet the requirements of BS4213. It has a high (2% min) carbon black content for extra UV stability and opacity.

Revolve M-711 is a rotational moulding polyethylene general purpose grade designed to provide antistatic properties and still maintain wide processing window, excellent mouldability and good impact strength. The grade is suitable for food contact applications.

Revolve M-716 is a rotational moulding polyethylene general purpose grade designed to provide conductivity and still maintain wide processing window, excellent mouldability and good impact strength. The grade is suitable for food contact applications.

Revolve M-719 is a fully formulated black rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-721 is a fully formulated black rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-732 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-736 is a rotational moulding grade designed to provide an excellent combination of physical properties such as impact strength, stiffness, flow characteristics. This makes the grade suitable for applications where hardness resistance and high stiffness is required.

Revolve M-748 is a rotational moulding hexene polyethylene black grade designed to provide stiffness and mouldability without compromising impact resistance. The grade is suitable for large water and diesel tank applications. The grades carries TÜV and WRAS approvals.

Revolve M-760 is a Super-Linear rotational moulding grade designed to provide excellent stiffness without compromising impact properties and toughness which makes the grade ideal for any leisure marine products like kayaks, canoes and boat. The grade is suitable for for multi-layer applications in combination with any Matrix foam.

Revolve M-762 is a fully formulated black rotomoulding resin suitable in applications where stiffness is a requirement. This grade presents excellent stiffness, good impact strength and toughness.

Revolve M-765 is a fully formulated rotational moulding foam grade which has been designed to give a soft, flexible foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-772 is a fully formulated rotational moulding foam grade which has been designed to give a soft, flexible foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-776 is a rotational moulding polyethylene black grade. It has been designed to provide good flow characteristics and medium stiffness without compromising impact properties. It is advisable to use this grade for general purpose applications.

Revolve M-794 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve N-109 is a rotational moulding polyethylene general purpose grade. It has been designed to provide wide processing window, good flow characteristics without compromising impact strength.

Revolve N-131 is a Super-Linear rotational moulding grade designed to provide high stiffness without compromising impact properties which makes the grade ideal for any leisure marine products. The grade is suitable for multi-layer applications in combination with foam.

Revolve N-250 is a rotational moulding polyethylene general purpose grade. It has been designed to provide wide processing window, excellent mouldability without compromising impact strength. The grade is UV8 stabilised and it is the base of all standard colours and mottle effects.

Revolve n-259 is a fully formulated black rotomoulding resin suitable in applications where stiffness is a requirement. This grade presents excellent stiffness, good impact strength and toughness.

Revolve N-261 is a rotational moulding polyethylene butene grade. It has been designed to provide good flow characteristics without compromising impact properties.

Revolve N-264 is a rotomoulding high density polyethylene resin which has good mouldability, impact strength and is fully UV stabilised.

Revolve N-265 is a fully formulated rotational moulding grade especially suitable for general purpose applications where extra impact strength is required. This grade is ideal for applications such as small tanks and other "industrial" items. This grade is also suitable for ESCR and chemical resistance applications.

Revolve N-270 is a fully formulated rotomoulding grade designed for general purpose applications and small tanks. The resin has medium stiffness, good impact strength, ductility and mouldability.

Revolve N-461 is a rotational moulding polyethylene general purpose grade. It has been designed to provide wide processing window, excellent mouldability without compromising impact strength. The grade is UV8 stabilised.

Revolve xl400 is a rotational moulding cross-linkable polyethylene grade which combines outstanding performance with all the benefits of a high MFI resin. This grade is especially suitable for demanding applications such as diesel tanks and IBCs due to the superb chemical resistance. It is advisable to consult the MSDS before it is used.

Revolve xl400 is a rotational moulding cross-linkable polyethylene grade which combines outstanding performance with all the benefits of a high MFI resin. This grade is especially suitable for demanding applications such as diesel tanks and IBCs due to the superb chemical resistance. It is advisable to consult the MSDS before it is used.

ESD Protection - Electrically Conductive - Extrusion Grade - Preliminary Datasheet

Polyethylene 603 Black Offers this combination of properties: High density, Injection molding grades, Good chemical resistance

DFDA-5488 NT is a fast cross-linking catalyst masterbatch designed to be used with the scorch retardant DFDB-5451NT ethylene-silane copolymer in order to produce insulation for power and control tray cables up to 1KV. Because the catalyst masterbatch is shipped separately from the silane-modified polyethylene, the components are very shelf-stable. Crosslinking of the insulation system only occurs after hot melt mixing of the two components and exposure to moisture. When DFDA-5488 NT is mixed with DFDB-5451 NT, the resulting system has excellent scorch resistance during extrusion. DFDA-5488 NT includes sufficient antioxidant so that the SI-LINK™ AC system provides excellent processing and product performance. This insulation system is designed to be effective on either copper or aluminum conductors. The recommended level of usage for DFDA-5488 NT is 5% by weight. The specific level will depend on the process and conditions used. For your particular application, contact your Dow representative for recommended levels.

SI-LINK™ AC Crosslinkable Polyethylene DFDB-5451 NT is a scorch retardant ethylene- silane-copolymer developed for use in power cable and control cable applications up to 1 kV. DFDB-5451 NT may be crosslinked under ambient conditions after it is extruded with the DFDA-5488 NT catalyst masterbatch. If a black product is required for UV protection, the addition of DFDB-5410 BK is recommended. Because the catalyst and carbon black masterbatches are shipped separately from the DFDB-5451 NT copolymer, the components are very shelf-stable. Crosslinking of the total system only occurs after hot melt mixing of the components and exposure to moisture and temperature. Specifications When DFDB-5451 NT is crosslinked with DFDA-5488 NT, and optionally, DFDB-5410 BK, it should meet typical 1 kV or less low voltage specifications such as those in: - UL: 854 - ICEA: S-66-524 - CSA: RW90 - IEC: 60502-1

DFDA-5445 BK is a flame retardant carbon black-filled master-batch for use with SI-LINK® PE that can be used in large cables requiring UL-44 horizontal burn flame performance. This product is formulated to pass Horizontal Burn XHHW-2 on larger cables. Specifications DFDA-5445 BK, is used at 35% in conjunction with 60% SI-LINK Cross-linkable Polyethylene DFDA-5451 NT and 5% DFDB-5480 NT Catalyst Master-batch on size 2 AWG conductors and larger. At these concentrations the necessary properties, including flame retardance, the requirements for XHHW-2, RHW-2 and RHH cables as defined by UL-44 and UL-1571, as well as Underground Service Entrance (USE-2) as defined by UL-854 and UL-1581 are met. Horizontal burn performance has been successfully demonstrated on sizes as small as 6 AWG with higher concentrations of DFDA-5445 BK. DFDA-5445 BK is a highly filled black flame retardant master-batch for addition to the standard SI-LINK PE base resin (DFDA-5451) and catalyst (DFDB-5480) moisture cure system. DFDA-5445 BK offers flexibility in tailoring the formulation to meet the horizontal burn requirement on a range of cable sizes. Typically, a usage level of 55% for DFDA-5445 BK will pass the horizontal burn test down to size 6 AWG; a usage level of 35% will pass the horizontal burn test down to size 2 AWG. The economics of the formulation may be optimized for a particular application depending on the cable sizes produced and the UL submittal sizes selected. Such factors as processing conditions, degree of cure and type of conductor can affect the results, so cable manufacturers must determine the optimal formulations for their applications.

SI-LINK™ DFDA-5481 NT is a catalyst masterbatch developed to be used in conjunction with moisture curable ethylene-silane copolymers, such as Dow SI-LINK™ Polyethylene DFDA-5451 by providing the catalyst necessary to crosslink these compounds. It is formulated to produce faster curing than the DFDB-5480 NT catalyst masterbatch in order to reduce cure times when producing power and control cables for applications up to 1 kV. Because the catalyst masterbatch is shipped separately from the silane-modified polyethylene, the components are very shelf stable. Crosslinking of this insulation system only occurs after hot melt mixing of the two components. DFDA-5481 NT provides excellent scorch resistance when mixed with SI-LINK™ DFDA-5451 NT. DFDA-5481 NT includes sufficient antioxidant so that the insulation system provides excellent processing and product performance stabilization. This insulation system is designed to be effective either for copper or aluminum conductors. The recommended level of usage for DFDA-5481 NT is 5% by weight. The specific level will depend on the process and conditions used. For your particular application, contact your Dow sales or technical representative for recommended levels.

SI-LINK™ DFDB-5400 NT is a RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5425 and is moisture curable. The specific gravity of the system is 1.04. It is recommended for use in low voltage power cable and industrial cable applications. SI-LINK™ DFDB-5400 NT is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030 in. insulation wall thickness, at a 25% loading with 70% SI-LINK™ DFDA-5451 NT and 5% SI-LINK™ DFDB-5480 NT. UV resistance allowing the wire to be printed "SunRes" may be achieved with the addition of a UV stabilizer package. The formulation for such an additive is available upon request and the resulting product is bulletinized by UL as DFDB-5425 UV. For accelerated curing applications SI-LINK™ DFDB-5400 NT can be used in conjunction with SI-LINK™ AC DFDB-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ AC DFDA-5488 NT Polyethylene to form a flame retardant SI-LINK™ AC polyethylene insulation system. This system is recognized by UL as DFDB-5425 AC. It is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030" wall thickness, at a 25% loading with 70% SI-LINK™ DFDB-5451 NT and 5% SI-LINK™ AC DFDA-5488 NT. SPECIFICATIONS The DFDB-5425 systems are bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2. They are also suitable for CSA RW-90, and RWU-90 applications.

DFDB-5410 BK is a carbon black filled masterbatch developed for use with the SI-LINK™ Polyethylene insulation system. This carbon black masterbatch is especially designed to provide excellent UV protection and to minimize the amount of moisture it absorbs. Advantages DFDB-5410 BK has excellent handling and processing advantages when used in SI-LINK™ Polyethylene insulation system applications: - A Low tendency to adsorb moisture. - Formulated with a high concentration of carbon black allowing processor to use less. Specifications DFDB-5410 BK, when used in conjunction with the SI-LINK™ Polyethylene moisture curable insulation system, provides carbon black for UV protection. To achieve 2.5% carbon black in the final product, DFDB-5410 BK should be incorporated at a level of 6.3%. Packaging DFDB-5410 BK is available in 25-kg foil bags or 1500-lb foil-lined bulk cartons.

SI-LINK™ DFDB-5445 BK is a RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5445 BK and is moisture curable. The specific gravity of the system is 1.02. It is recommended for use in low voltage power cable and industrial cable applications. It is formulated to pass the UL-44 horizontal burn test on larger cables. SI-LINK™ DFDB-5445 BK, a highly filled black flame retardant master-batch, is intended to be used at a 35% concentration along with 60% SI-LINK Polyethylene DFDA-5451 NT and 5% SI-LINK DFDB-5480 NT Catalyst Master-batch on size #2 AWG conductors and larger. At this concentration the requirements for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 cables as defined by UL-44, UL-854 are satisfied. . SI-LINK™ DFDB-5445 BK offers flexibility in tailoring the formulation to meet the horizontal burn requirement on a range of cable sizes. At increased concentrations, SI-LINK™ DFDB-5445 BK has been shown to provide horizontal burn test compliance in smaller sizes. The economics of the formulation may be optimized for a particular application depending on the cable sizes produced and the UL submittal sizes selected. Such factors as processing conditions, degree of cure and type of conductor can affect the results, so cable manufacturers must determine the optimal formulations for their applications. Recommendations are available upon request. SPECIFICATIONS The SI-LINK™ DFDB-5445 BK system is bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 on sizes 2 AWG and larger. It is suitable for CSA RW-90, and RWU-90 applications.

DFDB-5480 NT is a catalyst masterbatch developed to be used in conjunction with moisture curable ethylene-silane copolymers such as Dow SI-LINK™ Polyethylene DFDA-5451 NT by providing the catalyst necessary to crosslink these compounds. Because the catalyst masterbatch is shipped separately from the ethylene-silane copolymer, both components are very shelf stable. Crosslinking of this insulation system only occurs after hot melt mixing of the two components and exposure to moisture. DFDB-5480 NT provides excellent scorch resistance when mixed with DFDA-5451 NT. DFDB-5480 NT includes sufficient antioxidant so that the insulation system provides excellent processing and product performance. This insulation system is designed to be effective either for copper or aluminum conductors. The recommended level of usage for DFDB-5480 NT is 5% by weight. The specific level will depend on the process and conditions used. For your particular application, contact your Dow representative for recommended levels.

Advantages: - Exceptionally fast surface - More cost-effective than other low friction sheet products - Requires no messy surface coatings or spray-on lubricants - Non-absorbent - UV resistant - Can withstand sub-zero temperatures - FDA compliant - Superior flatness for easy cutting and installation - Weldable and formable - Good chemical resistance Applications: - Package chutes - Truck bed linings - Plow Shovels - Guides - Bumper or dock fenders - Conveyors - Material handling equipment - Agricultural and food processing components