Bondyram® 4108 is a Maleic Anhydride Modified Linear Low Density Polyethylene contains functional groups that enhance its adhesion to a variety of polymers such as: PA, EVOH, and metals such as steel and aluminum. Bondyram® 4108 functions as a concentrated resin tie-layer in multilayer barrier packaging structures. Bondyram® 4108 can be used in a wide variety of co-extrusion processes for the manufacturing of bottles, tubes, sheets and films. This product is food contact standards compliant.

Bondyram® TL4110 is a Maleic Anhydride Modified Linear Low Density Polyethylene contains functional groups that enhance the adhesion to a variety of substances such as: PA, EVOH, and metals such as steel and aluminum. Bondyram® TL4110 functions as a tie-layer resin in multilayer barrier packaging structures. Bondyram® TL4110 can be used as is or diluted with Polyethylene for wide variety of co-extrusion processes for the manufacturing of bottles, tubes, sheets and films. This product is food contact standards compliant.

Bondyram® TL4112 modified linear low density polyethylene contains functional groups that enhance its adhesion to polar polymers such as EVOH and PA, and to metals such as aluminum. The material functions as a tie-layer resin in multilayer barrier packaging structures. Bondyram® TL4112 can be used as is or diluted in polyethylene, in a wide variety of co-extrusion processes for the manufacturing of bottles, tubes, sheets and films. This product is food contact standards compliant.

Bondyram® TL4113 is a maleic anhydride modified linear low density polyethylene contains functional groups that enhance the adhesion to a variety of substances such as: PA, EVOH, and metals such as aluminum. Bondyram® TL4113 functions as a tie-layer resin in multilayer barrier packaging structures.

Bondyram® TL4123 modified linear low density polyethylene contains functional groups that enhance its adhesion to polar polymers such as EVOH and PA, and to metals such as aluminum. The material functions as a tie-layer resin in multilayer barrier packaging structures. Bondyram® TL4123 can be used in a wide variety of co-extrusion processes for the manufacturing of bottles, tubes, sheets and films. This product is food contact standards compliant.

Bondyram® TL4808 is a Maleic Anhydride Modified Linear Low Density Polyethylene contains functional groups that enhance its adhesion to a variety of polymers such as: Polyamide, EVOH and metals such as steel and aluminium. Bondyram® TL4808 functions as a ready to use resin tie-layer in multilayer barrier packaging structures. , This product is food contact standards compliant.

FG5199 is a Butene Linear Low Density Polyethylene for Film Extrusion. Includes Antioxidant, Anti-Fog and Cling additives. The grade is developed for blown cling film. Film made from FG5199 is suitable for manual wrapping of various foodstuffs e.g. cheese, meat and vegetables.

FG5223 is a Butene Linear Low Density Polyethylene for Film Extrusion. Includes Antioxidant and Anti-block additives. This grade is developed for production of lamination film. FG5223 has good heat sealing properties and hot tack strength. By mixing with FG5224 any desired level of friction can be obtained.

FG5224 is a Butene Linear Low Density Polyethylene for Film Extrusion. Includes Antioxidant, Anti-block and Medium Slip additives. This grade is developed for production of lamination film. FG5224 has good heat sealing properties and hot tack strength. By mixing with FG5223 any desired level of friction can be obtained.

Borstar FB2230 is a high molecular weight linear low density polyethylene film grade combining good and flexible extrusion behaviour, excellent draw down and superior mechanical properties For films made of Borstar FB2230 , the high toughness remains in cold conditions. CAS-No.: 25087-34-7 Applications Borstar FB2230 has been developed especially for applications like: - Agricultural films - Heavy-duty sack - Food packaging - Lamination films - Frozen food packaging - General packaging film Additives Borstar FB2230 contains antioxidant.

Borstar FB2310 is a high molecular weight linear low density polyethylene film grade combining good and flexible extrusion behaviour, excellent draw down and superior mechanical properties. For films made of Borstar FB2310 , the high toughness remains in cold conditions. Borstar FB2310 contains antioxidant.

Borstar FB4230 is a linear low density polyethylene film grade combining good and flexible extrusion behaviour, excellent draw down and superior mechanical properties. Blown film extrusion with Borstar LLDPE is comparable to LDPE, but with better flexibility in film thickness range and draw down. Applications Borstar FB4230 has been developed especially for applications like: - Food packaging - General packaging - Pouches - Frozen food packaging Additives Borstar FB4230 contains antioxidant.

Borstar LE8706 is a natural colourable linear low density (LLD) jacketing compound, which is produced with the Borealis proprietary Borstar bimodal process technology. Borstar technology allows the manufacturing of polymers outside the traditional MFR and density range making it possible to optimize processability, reduce shrinkage and yet provide excellent physical toughness and environmental stress crack resistance (ESCR). Borstar LE8706 contains a well dispersed UV-stabiliser in sufficient amount providing a measure of weathering resistance. Applications Borstar LE8706 is designed for jacketing of energy and communication cables. The abrasion resistance combined with low coefficient of friction makes it ideally suitable for the jacketing of energy and communication cables. Borstar LE8706 offers a balance of properties giving advantages in manufacturing, installation and lifetime performance of communication and energy cables. Specifications Borstar LE8706 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ASTM D 1248 Type I, Class A, Category 4, Grade E4, E5, J3 - ISO 1872-PE KHLN 23-D012 The following cable material standards are met by Borstar LE8706: - EN 50290-2-24 - DMP 5, 6, 13, 16, 18 Cables manufactured with Borstar LE8706 using sound extrusion practice normally comply with the following cable product standards: - IEC 60840, Type ST7 - IEC 60502, Part 2, Type ST7 - HD 603 S1, DMP 6 - HD 620 S2 Part 1, table 4B, DMP 5, 13, 16, 18 Special Features Borstar LE8706 consists of specially selected components to offer: - Superior processability - Excellent environmental stress cracking resistance (ESCR) - Heat deformation resistance - Low coefficient of friction - Low water permeability - Good petroleum-jelly resistance - Very good UV resistance - Low shrinkage

The low density linear polyethylene DL085C is obtained from reverse logistics of post-consumer packaging with a concentrtion of 100% recycled material . This product has a yellowish color. Applications: Masterbatches, Flexible packaging. Processes: Blown Film Extrusion, General extrusion.

DL085D linear low density polyethylene is obtained from post-consumer stretch filmes, having a concentration of 51% recycled material. This product has a yellowish color. Applications: Flexible packaging., Stretch Films Processes: Blown Film Extrusion, General extrusion.

FG31 is a Linear Low Density Polyethylene. Developed for blown film extrusion in blends with polyethylenes. Films obtained with this product show excellent mechanical properties. It contains antioxidant additives. Applications: Blends with HDPE, Blends with LDPE, General use packing, Industrial Sacks

The FM31D resin is a Linear Low Density Polyethylene for blown film extrusion. It has excellent mechanical properties, especially hot tack. It contains processing aid, antiblock, slip and antioxidant additive. Recommended Processing Conditions: The FM31D resin can be processed with polyethylenes on conventional extruders with a maximum ratio of 30%. The best results of low melt index. The recommended temperature profile for blends with LDPE is slightly higher than those ones for the conventional LDPE is slightly higher than those ones for the conventional LDPE (10 to 20ºC). Recommended blow up ratio: 1,8 to 3,0:1. Application: Blends with HDPE, Blends with LDPE, General use films, General use packing, Technical films for automatic packaging

FP33 resin is a Linear Low Density Polyethylene for film extrusion with good mechanical properties. Additivation: Anti-blocking, Sliding, Processing aid Processing Conditions: The FP33 resin must be processed in suitable extruders for this polymer. The optimal processing conditions vary according to the type of equipment used, but the best results were obtained with a mass temperature in the range of 150 to 190 ºC and mixture with 20 to 50% of low or medium density polyethylene, which allows excellent results in relation to the optical properties of the film obtained. Application Toilet Paper Film, General Purpose Film Process Tubular Film Extrusion

The HF0131XP is a linear low density polyethylene that shows an excellent processability and mate finish. Additive: Antioxidants Lubricant

HF2007 is a Linear Low Density Polyethylene developed for blown film extrusion. Films obtained with this product show high impact and puncture resistance. It contains processing aid and antioxidant additives.

The HF2207B5 resin is a linear low density polyethylene recommended for blown film extrusion. Have high impact and puncture resistance, high coefficient of friction (COF) and high weld rupture resistance. Additive: Antioxidant Processing aid Anti-blocking Application: Bags with valve, Blends with HDPE, Blends with LDPE, Laminates

The HF2208S3 resin is a linear low density polyethylene, developed for blown film extrusion with good mechanical properties. Additive: Antioxidant Slip Anti-blocking Processing Aid Applications: Coextrusion, General use films, High performance films, Packing for liquid products, Packing for solid products, Technical films for automatic packaging

The resin HF3712 is a polyethylene suited for geomembranes production. Due to its high molecular weight this product has an excellent balance of mechanical properties and processability.

The HF3714XP is a medium density polyethylene grade suited for the production of geomembranes. Due to its high molecular weight, this product has excellent balance of mechanical properties, productivity and processability. Its robust additive package improves performance and life time in applications directly exposed to weathering and UV radiation. Additives: Antioxidants and UV light stabilizers Applications: Geomembrane Processes: Geomembranes produced by blown film extrusion

IC32 is a linear low density polyethylene with narrow molecular weight, for injection molding. It offers good fluidity, great flexibility, tenacity and low warpage. Application: Caps, Houseware, Large flat injection molded articles, Masterbatches Processes: Extrusion, Injection Molding

IF33 is a linear low density polyethylene with narrow molecular weight, for injection molding applications. It offers high fluidity, good flexibility and low warpage. Application: Houseware, Large flat injection molded articles, Masterbatches, Caps Processes: Injection Molding, Extrusion

IN34 is a linear low density polyethylene with narrow molecular, for injection molding applications. It offers high fluidity and low warpage. Applications: Caps, Houseware, Large flat injection molded articles, Masterbatches Processes: Extrusion, Injection Molding

LF0720/20AF is a LLDPE. It shows excellent optical properties associated with good balance of mechanical properties, processing performance and sealability. This resin contains Antioxidant, Antiblocking and Processing Aid additive. Applications: Blends with HDPE, Blends with LDPE, General use packing

LF0720/21AF is a LLDPE that shows low haze and high clarity associated with good balance of mechanical properties, processing performance and sealability. Additive: Slip Medium; Antiblocking Medium; Processing Aid Medium Applications: Blends with HDPE, Blends with LDPE, Technical films, Technical films for automatic packaging Process: Blown Film Extrusion

LF1020/21AF is a Linear Low Density Polyethylene, with good balance of mechanical properties, processing performance and sealability. Additive: Slip Medium; Antiblocking Medium; Processing Aid Medium Applications: Blends with HDPE, Blends with LDPE, Technical films, Technical films for automatic packaging

Braskem LF320 is a Linear Low Density Polyethylene, with butane copolymer, developed for cast film extrusion. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties. It contains antioxidant additives. Applications: Stretch films Processes: Cast film extrusion

LF321FC is a Linear Low Density Polyethylene produced by gas phase process, specially developed for XLPE silane cross-linking in monosil process, to use in insulation and jacketing for low voltage wires and cables. This product contains suitable additives, low oligomer rate and very low gel content. Applications: Monosil system, Wire insulation, Low voltage XLPE insulation Process: Wire and Cable Extrusion

LH0820/30AF is a LLDPE that offers outstanding processability combined with excellent mechanical properties. Very low gel amount. Additive: Processing Aid, Antiblocking. Applications: Industrial Sacks, Bags with valve, Blends with HDPE, Blends with LDPE, Laminates Processes: Blown Film Extrusion

LH118 is a Linear Low Density Polyethylene developed for blown film extrusion. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains antioxidant additives. Applications: Blends with HDPE, Industrial Sacks, Blends with LDPE, Stretch Films, Flexible Packaging (Tubular Films), Liners, General use packing, Blends for irrigation pipes Process: Blown Film Extrusion

LH218 is a LLDPE, hexane comonomer, that shows a good balance between optical properties, mechanical properties, sealability and processability, with very low gel contained. Applications: Stretch Films, Blends with LDPE, Blends with HDPE, General use packing Process: Blown Film Extrusion, Cast Film Extrusion

LH537 is a LLDPE that offers an excellent processability, stiffness and soft touch for flat die films. Very low gel contents. Application: Hygienic absorbent, Diapers

LHB118/21 AF is a LLDPE copolymer produced by Braskem. It is a ready-to-use product since it contains 10% LDPE. Its additive package was optimized to avoid blocking, even at low thickness. Film obtained from this grade show very good mechanical properties and a good balance between sealability and processability. Very low gel amount. Additive: Processing Aid Medium, Antioxidants Medium, Slip Medium, Antiblocking High

LL118/21 is a LLDPE produced by Braskem. It is a general purpose product that shows a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. Additive: Antiblocking Medium, Slip Medium

Applications: Tamper evident caps, Large caps, Bungs, Houseware, Masterbatches Processes: Injection Molding, Extrusion

Braskem LL318 resin is a Linear Low Density Polyethylene developed to the cast film extrusion with a good relation between optical properties, mechanical properties and processability, besides it have an extremely low gel contain. Applications: Stretch films Processes: Cast film extrusion