Kalix® 2330 is a bio-sourced, polyamid-based compound with 30% by weight carbon fiber reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry.

Kalix® 2545 is a bio-sourced polyamide-based material for electronic devices with low dielectric constant. - Black: Kalix® 2545 BK 111

Kalix® 2555 is a bio-sourced, polyamide-based compound with 55% by weight glass reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance, outstanding dielectric properties, and excellent dimensional stability after molding are required. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry. - Black: Kalix® 2555 BK 999

Kalix® 2555 is a bio-sourced, polyamide-based compound with 55% by weight glass reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance, outstanding dielectric properties, and excellent dimensional stability after molding are required. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry. - Natural: Kalix® 2555 NT 000 - Black: Kalix® 2555 BK 000

Kalix® 2855 は 27% バイオベースの PA 6、10 系コンパウンドで、55%（重量）のガラス繊維で強化されています。この材料には、熱可塑性樹脂部品に最大の強度、剛性、耐衝撃性、また成形後の寸法安定性を提供する処方が使用されています。その低い粘度と優れた流動性により、この材料は、携帯電話電子部品業界で見られる薄肉部材を持つ部品を充填するために最適です。 - 黒：Kalix® 2855 BK 000 - 白：Kalix® 2855 WH 000

Kalix® 2955 は 27% バイオベースの PA 6、10 系コンパウンドで、55%（重量）のガラス繊維で強化されています。この材料は、成形後に良好な耐衝撃性と優れた寸法安定性が必要な、高強度、高剛性の用途専用の処方です。この処方は、ガラス繊維強化材料の異方性収縮に関連するそりの問題にも対応するため、許容誤差が小さい成形を容易に行うことができます。その低い粘度と優れた流動性により、この材料は、携帯電話電子部品業界で見られる薄肉部材を持つ部品を充填するために最適です。 - 黒：Kalix® 2955 BK 000 - 白：Kalix® 2955 WH 000

Kalix® 2940 is a bio-sourced, polyamide-based compound with 40% by weight glass fiber reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. The formulation also addresses warpage issues associated with the anisotropic shrinkage of glass fiber reinforced materials so that close tolerance molding is more easily achieved. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry.

Kalix® 2955 is a bio-sourced, polyamide-based compound with 55% by weight glass fiber reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. The formulation also addresses warpage issues associated with the anisotropic shrinkage of glass fiber reinforced materials so that close tolerance molding is more easily achieved. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry. - Black: Kalix® 2955 BK 000 - White: Kalix® 2955 WH 000

Kalix® 5950 HFFR is a halogen-free, flame retardant (UL-94 V0 at 0.4 mm), highly reinforced polyamide material specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. The formulation also addresses warpage issues associated with the anisotropic shrinkage of glass fiber reinforced materials so that close tolerance molding is more easily achieved. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry. - Black: Kalix® 5950 BK 000 HFFR - White: Kalix® 5950 WH 000 HFFR - White: Kalix® 5950 WH 001 HFFR - White: Kalix® 5950 WH 008 HFFR

Kalix® 7650 is a high-performance polyamide based material for electronic devices with high flow and low warpage. - Black: Kalix® 7650 BK 000

Kalix® 9850 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties and excellent surface quality. Kalix® 9850 is characterized by high stiffness and strength, very good impact properties, good dimensional stability, and excellent surface finish. Kalix® 9850 exhibits an excellent combination of high flow, low flash tendency and fast cycle time which makes it a cost-competitive option for thin-walled parts produced in large quantities, such as structural parts in mobile electronic devices. - Black: Kalix® 9850 BK 000

Kalix® 9945 HFFR は、45% ガラス繊維強化、ハロゲンフリーの難燃性高機能ポリアミドです。低温金型対応で、高い機械特性、優れた表面品質、優れた燃焼性の評価が必要な部品で使用することを意図しています。 - 黒：Kalix® 9945 BK000 HFFR

Kalix® 9950 は 50% ガラス繊維強化高機能ポリアミドです。低温金型対応で、高い機械特性および優れた表面品質が必要な部品で使用することを意図しています。 Kalix® 9950 は高い剛性および強度、非常に良好な衝撃特性、良好な寸法安定性、低いそり挙動および優れた表面外観が特長です。たとえば非導電性真空金属蒸着により適切にメッキすることも、ソフトタッチまたは UV 上塗り塗装で塗装することもできます。適切なメッキおよび塗装系の詳細は、ソルベイスペシャルティポリマーズの営業担当者にお問い合わせください。 Kalix® 9950 は、高い流動性、低いバリ発生の傾向、また携帯電子機器の構造部品などの大量生産型の薄肉部品のコスト競争力を上げるハイサイクルを併せ持っています。 - 黒：Kalix® 9950 BK 000 - 白：Kalix® 9950 WH 000 - ナチュラル：Kalix® 9950 NT 000

Kalix® r9155 is a glass-fiber reinforced high performance polyamide with an average of 91% wt recycled content for the entire material consisting of 34.4% PIR/PCR and 56.4% PIR allocated on a mass-balance basis*. It is hot-water moldable and intended for use in components requiring superior mechanical properties and excellent surface quality. Kalix® r9155 is characterized by high stiffness and strength, very good impact properties, good dimensional stability, low warpage behavior and excellent surface finish. It can be successfully plated, for example with non conductive vacuum metallization, or painted with soft touch or UV top coat paints. Please contact your Syensqo sales representative for more information on suitable plating and painting systems. *Notes: (1) The data was calculated consistent with the international standard for Environmental Labels and Declarations/Self-Declared Environmental Claims, ISO 14021:2016, using a proportion, by mass, of recycled material in a product (without packaging), while only pre-consumer and post-consumer materials were considered as recycled content, also consistent with the standard’s usage of terms. (2) This information is provided in good faith and is believed accurate as of the date of this document based on a review of recent composition data and information supplied by the vendors. The information and the results hereinabove are provided “as is”, at the discretion of the disclosing company, without guarantee, warranty or representation of any kind, express or implied, including but not limited to, as to (i) their accuracy or completeness, (ii) their fitness for a particular purpose and non infringement of third parties’ intellectual property rights, and (iii) their use. The Syensqo Group companies shall incur no liabilities in connection with the foregoing. According to ISO 14021 standards, the use of environmental claims to support comparative assertions intended to be disclosed raises special concerns and requires specific critical review.