Kalix® r9155 is a glass-fiber reinforced high performance polyamide with an average of 91% wt recycled content for the entire material consisting of 34.4% PIR/PCR and 56.4% PIR allocated on a mass-balance basis*. It is hot-water moldable and intended for use in components requiring superior mechanical properties and excellent surface quality. Kalix® r9155 is characterized by high stiffness and strength, very good impact properties, good dimensional stability, low warpage behavior and excellent surface finish. It can be successfully plated, for example with non conductive vacuum metallization, or painted with soft touch or UV top coat paints. Please contact your Syensqo sales representative for more information on suitable plating and painting systems. *Notes: (1) The data was calculated consistent with the international standard for Environmental Labels and Declarations/Self-Declared Environmental Claims, ISO 14021:2016, using a proportion, by mass, of recycled material in a product (without packaging), while only pre-consumer and post-consumer materials were considered as recycled content, also consistent with the standard’s usage of terms. (2) This information is provided in good faith and is believed accurate as of the date of this document based on a review of recent composition data and information supplied by the vendors. The information and the results hereinabove are provided “as is”, at the discretion of the disclosing company, without guarantee, warranty or representation of any kind, express or implied, including but not limited to, as to (i) their accuracy or completeness, (ii) their fitness for a particular purpose and non infringement of third parties’ intellectual property rights, and (iii) their use. The Syensqo Group companies shall incur no liabilities in connection with the foregoing. According to ISO 14021 standards, the use of environmental claims to support comparative assertions intended to be disclosed raises special concerns and requires specific critical review.

Omnix® 4020 is a 20% glass-fiber reinforced, heat-stabilized, high-performance polyamide (HPPA). It is particularly suited for replacing die-cast metal in a variety of mechanical applications and components used in automotive, consumer goods, E/E, and construction. Components injection molded from Omnix® 4020 display exceptional mechanical properties and excellent surface appearance even after moisture adsorption. - Black: Omnix® 4020 BK 000

Omnix® 4030 is a 30% glass-fiber reinforced, heat-stabilized, high-performance polyamide (HPPA). It is particularly suited for replacing die-cast metal in a variety of mechanical applications and components used in automotive, consumer goods, E/E, and construction. Components injection molded from Omnix® 4030 display exceptional mechanical properties and excellent surface appearance even after moisture adsorption. - Black: Omnix® 4030 BK 000 - Natural: Omnix® 4030 NT 000

Omnix® 4050 is a 50% glass-fiber reinforced, high-performance polyamide (HPPA). It is particularly suited for replacing die-cast metal in a variety of mechanical applications and components used in automotive, consumer goods, E/E, and construction. Components injection molded from Omnix® 4050 display exceptional mechanical properties and excellent surface appearance even after moisture adsorption. - Black: Omnix® 4050 BK 000 - Natural: Omnix® 4050 NT 000

Omnix® Supreme 7050, as part of the Omnix High Performance PolyAmide (HPPA) Supreme portfolio, presents high rigidity, low creep and very low moisture pickup. Omnix® Supreme 7050 is a 50% glass reinforced HPPA Supreme, heat stabilised. - Black: Omnix® 7050 BK 000

Omnix® 9050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® 9050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative to die-cast alloys for application in automotive, electrical appliance and mechanical equipment. It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade. - Black: Omnix® 9050 BK 000 - Natural: Omnix® 9050 NT 000

Omnix® DW-4050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® DW-4050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative for drinking and potable water. Omnix® DW-4050 is approved for use in potable water in France, Germany, United States and United Kingdom. It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade. - Black: Omnix® DW-4050 BK 001 - Natural: Omnix® DW-4050 NT 000

Omnix® FC-4050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® FC-4050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative for food service applications using die-cast alloys. Omnix® FC-4050 is cleared for use under United States Food and Drug Administration (FDA) Conditions of Use B through H, in contact with all food types except Food Type VI C, Beverages containing more than 8 percent alcohol. Omnix® FC-4050 is also cleared for food contact use by European Union regulations. For specific clearances, please contact your Syensqo representative. It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade. - Natural: Omnix® FC-4050 NT 000 - Black: Omnix® FC-4050 BK 001

Omnix® FC-9050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® FC-9050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative for food service applications using die-cast alloys. Omnix® FC-9050 is approved for food contact and meets FDA regulations for Omnix® FC-9050 NT 000 (natural) and Omnix® FC-9050 BK 000 (black) based on clearances granted by FCN 001242 for repeated use food contact applications with all food types, under FDA conditions of use B through H as described in Tables 1 and 2 of 21 CFR 176.170(c). It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade. - Black: Omnix® FC-9050 BK 000 - Natural: Omnix® FC-9050 NT 000

*** This product has been rebranded. The new name is Xencor™ PA66 LGF-1030 HI. *** Strator® A-3 HI N7 is a high impact, 30% long glass fiber reinforced, easy-flowing PA66 with a pellet length of 7 mm which can be processed on most injection molding machines. This material achieves extremely high mechanical and thermal properties, in combination with ease of processing and fast cycle times. It exhibits high strength, stiffness and impact strength at high temperatures; excellent creep and fatigue resistance; isotropic mechanical properties and reduced isotropic shrinkage; high shear strength and high burst pressure; and an excellent surface finish.

Strator® C-4, a 40% long glass fiber reinforced high-flow PA66 alloy and can easily be processed on most injection molding machines.

Tribocomp® PA66 AF15 TS0 is an aramid fiber reinforced PA66 that is heat stabilized and friction and wear modified. It can easily be processed on most injection molding machines.

Tribocomp® PA66 GF40 TS5 is high-flow PA compound reinforced with a specific package of glass and aramid fibers, which results in unique properties. The grade can easily be processed on most injection molding machines.

Tribocomp® PA66 LGF30 PTFE12 N6 is a 30% long glass fiber reinforced, high-flow PA66 containing 12% PTFE and having excellent tribological performance. It can easily be processed on most injection molding machines.

Tribocomp® PA66 LGF30 PTFE15% MoS0.5% is a 30% long glass fiber reinforced high-flow PA66 compound containing a PTFE/MoS2 package. It has been specifically designed for friction and wear applications. It can be easily be processed on most injection molding machines.

Tribocomp® PA66 PA66 LGF30 PTFE18 N6, is a 30% long glass fiber reinforced, high-flow PA66 compound containing 18% PTFE and having excellent tribological performance. It can easily be processed on most injection molding machines.

Tribocomp® PA66 LGF30 TS0 S8, is a 30% long glass fiber reinforced, black, high-flow PA66 compound containing 15% PTFE and having excellent tribological performance. It can easily be processed on most injection molding machines.

Tribocomp® PA66 LGF35 S9 MoS2 is a 35% long glass fiber reinforced high-flow PA66 with a pellet length of 9mm and MoS2. It can easily be processed on most injection molding machines.

Tribocomp® PPA GF30 TS0 is a 30% short glass fiber high-temperature PPA based on standard pellets that has been reinforced and lubricated with PTFE. It can easily be processed on most injection molding machines.

Xencor™ HPPA LGF-4050 is a 50% Long Glass Fiber reinforced, easy-flowing, heat stabilized HPPA with a very high flexural modulus. It exhibits unique stiffness/toughness combination, an excellent retention of properties in a wide temperature range as well as outstanding creep and fatigue resistance. Xencor™ HPPA LGF-4050 has a pellet length of 9mm and can be processed on most injection-molding machines. It is available in black. Black: Xencor™ HPPA LGF-4050 BK 000-9

Xencor™ HPPA LGF-4060 is a 60% Long Glass Fiber reinforced, easy-flowing, heat stabilized HPPA with a very high flexural modulus. It exhibits unique stiffness/toughness combination, an excellent retention of properties in a wide temperature range, as well as outstanding creep and fatigue resistance. Xencor™ HPPA LGF-4060 has a pellet length of 9mm and can be processed on most injection-molding machines. It is available in black. Black: Xencor™ HPPA LGF-4060 BK 000-9

Xencor™ PA66 LCF-2030, a 30% long carbon fiber reinforced, heat stabilized PA66, can easily be processed on most injection molding machines. The material exhibits an excellent combination of high stiffness and impact performances, while ensuring ease of processing and fast cycle times. It provides high strength, outstanding stiffness retention at high temperature, excellent creep and fatigue resistance, isotropic mechanical properties with low isotropic shrinkage, and excellent surface finish. Available in natural, the pellet length is 7mm. Natural: Xencor™ PA66 LCF-2030 BK001-7

Xencor™ PA66 LGF-1030 HI is a high impact, 30 % long glass fiber reinforced, easy-flowing PA66 with a pellet length of 7 mm which can be processed on most injection molding machines. This material achieves extremely high mechanical and thermal properties, in combination with ease of processing and fast cycle times. It exhibits high strength, stiffness and impact strength at high temperatures; excellent creep and fatigue resistance; isotropic mechanical properties and reduced isotropic shrinkage; high shear strength and high burst pressure; and an excellent surface finish. Natural: Xencor™ PA66 LGF-1030 HI NT-7 Black: Xencor™ PA66 LGF-1030 BK 010-7

Xencor™ PA66 LGF-2040 is a 40% long glass fiber reinforced high-flow PA66 alloy and can easily be processed on most injection molding machines. Black: Xencor™ PA66 LGF-2040 BK 010-7

Xencor™ PARA LGF-1050 is a 50% Long Glass Fiber reinforced, heat stabilized polyarylamide PARA with excellent surface gloss, low moisture absorption and high heat deflection temperature. It exhibits unique stiffness/toughness combination, an excellent retention of properties in a wide temperature range, as well as outstanding creep resistance. Xencor™ PARA LGF-1050 has a pellet length of 9mm and can be processed on most injection-molding machines. It is available in black and natural. Black: Xencor™ PARA LGF-1050 BK 000-9 Natural: Xencor™ PARA LGF-1050 NT-9

Xencor™ PPA LGF-1930 FW HS is a 30% long glass fiber reinforced, heat stabilized polyphtalamide PPA, with improved friction & wear properties, high heat deflection temperature, very high flexural modulus and low moisture absorption. It displays an excellent retention of properties in a wide temperature range as well as outstanding creep and fatigue resistance. Xencor™ PPA LGF-1930 FW HS has a pellet length of 9mm and can be processed on most injection-molding machine. - Black: Xencor™ PPA LGF-1930 FW HS BK 545-9

Xencor™ PPA LGF-1930 HS is a 30% Long Glass Fiber reinforced, heat stabilized polyphtalamide PPA, with high heat deflection temperature, very high flexural modulus and low moisture absorption. It displays an excellent retention of properties in a wide temperature range as well as outstanding creep and fatigue resistance. Xencor™ PPA LGF-1930 HS has a pellet length of 9mm and can be processed on most injection-molding machines. - Black: Xencor™ PPA LGF-1930 HS BK 545-9 - Natural: Xencor™ PPA LGF-1930 HS NT-9

Xencor™ PPA LGF-1950 HS is 50% long glass fiber reinforced, easy-flowing PPA which can be processed on most injection molding machines. This material achieves extremely high mechanical and thermal properties, in combination with ease of processing and fast cycle times. It exhibits high strength, stiffness and impact strength at high temperatures; excellent creep and fatigue resistance; isotropic mechanical properties and reduced anisotropic shrinkage; high shear strength and high burst pressure; and an excellent surface finish. - Black: Xencor™ PPA LGF-1950 HS BK 545-9 - Natural: Xencor™ PPA LGF-1950 HS NT-9

アモデル® A-1130 FW は、固体潤滑剤を含む 30% ガラス繊維強化ポリフタルアミド（PPA）グレードです。この樹脂は、中程度の圧力、低速摩擦、および摩擦用途向けに設計されています。 - 黒：A-1130 FW BK 324

アモデル® A-1133 HS は、33% ガラス繊維強化、熱安定剤添加のポリフタルアミド（PPA）で、高い荷重たわみ温度、高い曲げ弾性率、および高い引張強さを有します。優れた耐クリープ性と低い吸水率もこの樹脂の特性です。試験は、ISO-1110、促進調整方法に従い、絶乾状態のサンプルと相対湿度 50% に調整したサンプルで実施しました。 - 黒：A-1133 HS BK 324 - ナチュラル：A-1133 HS NT

Amodel® A-1133 NL resin is a 33% glass reinforced polyphthalamide (PPA) which is distinguished by its high-reflectivity white color. This grade features a high deflection temperature for compatibility with SMT processes, and low moisture absorption. - White: A-1133 NL WH 505

アモデル® A-1145 DW は 45% ガラス繊維強化樹脂で、高い強度および剛性を提供し、耐加水分解性を向上するために設計されています。この材料は吸水率が低く、熱膨張係数が小さいため、優れた寸法安定性を有します。比類なき耐クリープ性も備えています。 このグレードは、米国、フランス、ドイツ、およびイギリスで飲料水への使用が承認されています。 - ナチュラル：A-1145 NT DW - 黒：A-1145 BK 937 DW

Amodel® A-1145 HS LZT is an NIR laser transmissive, 45% glass reinforced, heat stabilized polyphthalamide (PPA) with a high heat deflection temperature, very high flexural modulus and very high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin. This grade is designed to be paired with other Amodel® black grades for black-on-black laser welding applications. - Black: Amodel® A-1145 HS LZT BK 979

アモデル® A-1145 HS は、45% ガラス繊維強化、熱安定剤添加のポリフタルアミド（PPA）で、高い荷重たわみ温度、非常に高い曲げ弾性率、および非常に高い引張強さを有します。優れた耐クリープ性と低い吸水率もこの樹脂の特性です。 - 黒：A-1145 HS BK 324 - ナチュラル：A-1145 HS NT

Amodel® A-1422 LS is a mineral filled, light stabilized, highly reflective polyphthalamide (PPA) which has been designed specifically to meet the needs of high-brightness (HB) LEDs. It offers high initial whiteness of the assembled LED. Adhesion to the encapsulants is excellent. The thermal properties combined with low shrinkage provide excellent packing around the head frame. The inherent thermal stability of the material means high readibility and excellent luminosity retention over the product service life. This grade also exhibits high deflection temperature, flexural modulus and tensile strength, with excellent creep resistance and low moisture absorption. It can be easily molded using convention injection molding equipment and methods. - White: A-1422 LS WH 171

アモデル® A-1565 HS は 65% ガラスおよびミネラル強化ポリフタルアミド（PPA）で、高温条件での高い剛性、良好な寸法安定性、および良好な剛性維持が必要な用途で高いコストパフォーマンスを提供するように設計されています。このグレードは、高い荷重たわみ温度と曲げ弾性率も有します。 - 黒：A-1565 HS BK 324

アモデル® A-1625 HS は、25% 炭素およびガラス繊維強化、熱安定剤添加グレードのポリフタルアミド（PPA）です。これは、静電荷の散逸が必要な用途向けの処方です。この材料は、低い透過性、低い膨潤、および高い耐熱性が必要な燃料システム用途に適切です。高い強度と剛性に加えて静電荷の散逸が求められる電気／電子系の部品にも使用できます。 アモデル® A-1625 HS は低い吸水率、優れた寸法安定性、また他の ESD 材料よりも優れた耐クリープ性を有します。 - 黒：A-1625 HS BK 324

アモデル® A-1933 HSL は、33% ガラス繊維強化グレードのポリフタルアミド（PPA）樹脂です。このグレードは、50/50 エチレングリコール／水環境での性能を向上させるために特別に開発されたものです。この材料の試験は、活性の高い自動車のクーラント系、エチレングリコールと有機酸安定剤を 130 ℃で使用して行いました。この樹脂は、高温の不凍液に曝露されるポリマー材料について自動車業界が求める性能を上回っています。 潜在的な用途として、サーモスタットハウジング、ヒーターコアエンドキャップ、ヒーターホースコネクター、吸水口、排出口、バルブを含むさまざまな自動車部品があります。 - 黒：A-1933 HSL BK 328