*Previously TECHNYL eXten D 238 V30 BLACK TECHNYL D 238 V30 BK is a polyamide 6.10, reinforced with 30% of glass fibre, heat stabilized, impact modified, for injection moulding. Thi grade offers excellent chemical resistance, low water absorption, very good mechanical properties and moldability. It is a partially bio-sourced material.

TECHNYL D 247F NC is an unfilled grade based on polyamide blend of polyamide 6.10 and polyamide 66, heatstabilized, impact modified, for injection moulding. This grade has been designed to offer high impact strength, alkaliresistance and excellent productivity. It is a partially bio-sourced materia

*Previously TECHNYL ALLOY KC 246 NATURAL TECHNYL KC 246 NC is an unfilled grade based on blend of polyamide 6 and acrylonitrile butadiene styrene (PA6 + ABS), impact modified, for injection moulding. This grade offers high mechanical properties, good dimensional stability and good processability. This grade offers an excellent impact with an ideal combination between stiffness and toughness. It is a synergistic blend material between Polyamide 6 and ABS with an ideal property combination, meaning that it has dual characteristics between semi-crystalline and amorphous polymers.

*Previously TECHNYL Lite C130 C60 TECHNYL LITE C 118 C60 T130 BK is an UD TAPE material, polyamide 6, reinforced with 60% of carbon fiber, heat stabilized. It offers a superior mechanical properties (high strength to weight ratio), execellent toughness, very good processability, high fiber impregnation, optimal cost performance ratio, for highly demanding applications.

TECHNYL LITE C 118 C60 T150 BK is an UD TAPE material, polyamide 6, reinforced with 60% of carbon fiber, heat stabilized. It offers a superior mechanical properties (high strength to weight ratio), execellent toughness, very good processability, high fiber impregnation, for highly demanding applications

*Previously TECHNYL Lite C210 C60 TECHNYL LITE C 118 C60 T210 BK is an UD TAPE material, polyamide 6, reinforced with 60% of carbon fiber, heat stabilized. It offers a superior mechanical properties (high strength to weight ratio), execellent toughness, very good processability, high fiber impregnation, optimal cost performance ratio, for highly demanding applications

*Previously TECHNYL Lite C250 V60 TECHNYL LITE C 118 V60 T250 BK is an UD TAPE material, polyamide 6, reinforced with 60% of glass fiber, heat stabilized. It offers a superior mechanical properties (high strength to weight ratio), execellent toughness, very good processability, high fiber impregnation, optimal cost performance ratio, for demanding applications

TECHNYL LITE C 118 V65 T250 BK is an UD TAPE material, Polyamide 6, reinforced with 65% of Glass fiber, heat stabilized. It offers a superior mechanical properties (high strength to weight ratio), excellent toughness, very good processability, high fiber impregnation, optimal cost performance ratio, for demanding applications.

*Previously TECHNYL Lite C250 V70 TECHNYL LITE C 118 V70 T250 BK is an UD TAPE material, polyamide 6, reinforced with 70% of glass fiber, heat stabilized. It offers a superior mechanical properties (high strength to weight ratio), execellent toughness, very good processability, high fiber impregnation, optimal cost performance ratio, for demanding applications

*Previously DOMAMID XS 66V50H1 BK PA66-Alloy, 50% fiber reinforced, heat-aging stabilized, for injection moulding

*Previously DOMAMID XS 66V50H1 BW88065 PA66-Alloy, 50% fiber reinforced, heat-aging stabilized, for injection moulding

*Previously DOMAMID XS 66V50H1 GN66079 PA66-Alloy, 50% fiber reinforced, heat-aging stabilized, for injection moulding

*Previously DOMAMID XS 66V50H1 GY77532 PA66-Alloy, 50% fiber reinforced, heat-aging stabilized, for injection moulding

*Previously DOMAMID XS 66V65H1 119 NC PA66-Alloy, 65% fiber reinforced, heat-aging stabilized, for injection moulding

TECHNYL ONE J 60X1 V15 BK is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 15% of glass fiber with best-in-class fire protection behavior, for injection moulding. This product has superior electrical performance compared to traditional high-performance plastics. Its low corrosion ensures processing tools longevity. This product, based on a high fluidity matrix, offers strong benefits in term of productivity and design freedom. The data provided are based on laboratory/experimental results. These data could be adjusted after industrial production.

TECHNYL ONE J 60X1 V15 NC is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 15% of glass fiber with best-in-class fire protection behavior, for injection moulding. This product has superior electrical performance compared to traditional high-performance plastics. Its low corrosion ensures processing tools longevity. This product, based on a high fluidity matrix, offers strong benefits in term of productivity and design freedom. The data provided are based on laboratory/experimental results. These data could be adjusted after industrial production.

TECHNYL ONE J 60X1 V30 BK is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 30% of glass fiber with best-in-class fire protection behavior, for injection moulding. A full yellow card is available with a UL94 V0 rating at 0.4 mm, unmatched thermal ageing properties (150°C electrical RTI - Relative Thermal Index), and outstanding electrical properties, including a high comparative tracking index (CTI 0 for 600 volts and higher). This product has superior electrical performance compared to traditional high-performance plastics. Its low corrosion ensures processing tools longevity. This Technyl is laser welding suitable. This product, based on a high fluidity matrix, offers strong benefits in term of productivity and design freedom.

TECHNYL ONE J 60X1 V30 GY 2682 LP is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 30% of glass fiber with best-in-class fire protection behavior, for injection moulding. A full yellow card is available with a UL94 V0 rating at 0.4 mm, unmatched thermal ageing properties (150°C electrical RTI - Relative Thermal Index), and outstanding electrical properties, including a high comparative tracking index (CTI 0 for 600 volts and higher). This product has superior electrical performance compared to traditional high-performance plastics. Its low corrosion ensures processing tools longevity. This product, based on a high fluidity matrix, offers strong benefits in term of productivity and design freedom.

TECHNYL ONE J 60X1 V30 GY 2683 LP is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 30% of glass fiber with best-in-class fire protection behavior, for injection moulding. A full yellow card is available with a UL94 V0 rating at 0.4 mm, unmatched thermal ageing properties (150°C electrical RTI - Relative Thermal Index), and outstanding electrical properties, including a high comparative tracking index (CTI 0 for 600 volts and higher). This product has superior electrical performance compared to traditional high-performance plastics. Its low corrosion ensures processing tools longevity. This product, based on a high fluidity matrix, offers strong benefits in term of productivity and design freedom.

TECHNYL ONE J 60X1 V30 GY 2689 is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 30% of glass fiber with best-in-class fire protection behavior, heat stabilized, for injection molding. A full yellow card is available with a UL94 V0 rating at 0.4 mm, unmatched thermal ageing properties (150°C electrical RTI - Relative Thermal Index), and outstanding electrical properties, including a high comparative tracking index (CTI 0 for 600 volts and higher). This product has superior electrical performance compared to traditional high-performance plastics. Its low corrosion ensures processing tools longevity. This product, based on a high fluidity matrix, offers strong benefits in term of productivity and design freedom.

TECHNYL ONE J 60X1 V30 GY 7035 LPU is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 30% of glass fiber with best-in-class fire protection behavior, heat stabilized, for injection molding. A full yellow card is available with a UL94 V0 rating at 0.4 mm, unmatched thermal ageing properties (150°C electrical RTI - Relative Thermal Index), and outstanding electrical properties, including a high comparative tracking index (CTI 0 for 600 volts and higher). This product has superior electrical performance compared to traditional high-performance plastics. Its low corrosion ensures processing tools longevity. This specific grade is laser markable UV. This product, based on a high fluidity matrix, offers strong benefits in term of productivity and design freedom.

TECHNYL ONE J 60X1 V30 NC is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 30% of glass fiber with best-in-class fire protection behavior, heat stabilized, for injection moulding. A full yellow card is available with a UL94 V0 rating at 0.4 mm, unmatched thermal ageing properties (150°C electrical RTI - Relative Thermal Index), and outstanding electrical properties, including a high comparative tracking index (CTI 0 for 600 volts and higher). This product has superior electrical performance compared to traditional high-performance plastics. Its low corrosion ensures processing tools longevity. This product, based on a high fluidity matrix, offers strong benefits in term of productivity and design freedom.

*Previously TECHNYL ONE XHT 1607 WHITE 9003 LPU TECHNYL ONE J 60X1 V30 White 9003 LPU is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 30% of glass fiber with best-in-class fire protection behavior, heat stabilized, for injection moulding. A full yellow card is available with a UL94 V0 rating at 0.4 mm, unmatched thermal ageing properties (150°C electrical RTI - Relative Thermal Index), and outstanding electrical properties, including a high comparative tracking index (CTI 0 for 600 volts and higher). This product has superior electrical performance compared to traditional high-performance plastics. Its low corrosion ensures processing tools longevity. This product, based on a high fluidity matrix, offers strong benefits in term of productivity and design freedom.

*Previously TECHNYL A 20 V25 BLACK 25 TECHNYL PROTECT A 20 V25 BK 25 is a Red Phosphorous flame retardant polyamide 66, reinforced with 25% of glass fiber, heat stabilized, for injection moulding. This grade provides robust UL 94 V-0 and a full UL yellow card while offering good mechanical properties. This grade is suitable for moulding insulating parts for electrical devices, and more generally for thin parts under stress.

*Previously TECHNYL A 20 V25 NATURAL TECHNYL PROTECT A 20 V25 NC is a Red Phosphorous flame retardant polyamide 66, reinforced with 25% of glass fiber, heat stabilized, for injection moulding. This grade provides robust UL 94 V-0 and a full UL yellow card while offering good mechanical properties. This grade is suitable for moulding insulating parts for electrical devices, and more generally for thin parts under stress.

*Previously DOMAMID FR 66G25V0P1 501 BK Polyamide 66, 25% glass fiber reinforced, heat-aging stabilized, red phosphorous flame retardant, for injection moulding

*Previously TECHNYL A 20 V35 BLACK 25 TECHNYL PROTECT A 20 V35 BK 25 is a Red Phosphorous flame retardant polyamide 66, reinforced with 35% of glass fiber, heat stabilized, for injection moulding. This grade provides robust UL 94 V-0 and a full UL yellow card while offering good mechanical properties. This grade is suitable for moulding insulating parts for electrical devices, and more generally for thin parts under stress.

*Previously DOMAMID FR 66V0A Polyamide 66, halogenated flame retardant, heat-aging stabilized, for injection moulding

*Previously DOMAMID FR 66V0A Polyamide 66, halogenated flame retardant, heat-aging stabilized, for injection moulding

*Previously DOMAMID FR 66G25V0AH1 Polyamide 66, 25% glass fiber reinforced, heat-aging stabilized, halogenated flame retardant, for injection moulding

TECHNYL PROTECT A 30H1 V30 NC is a flame retardant polyamide 66, reinforced with 30% of glass fibre, for injection moulding.

*Previously TECHNYL A 31H1 MX35 GREY 174N TECHNYL A 31H1 MX35 GREY 174N is a flame-retardant polyamide 66 reinforces with 35% of mineral filler, for injection moulding. This grade offers excellent flame retardancy properties (UL94, GWIT) combined with excellent processing, mechanical and electrical performance.

TECHNYL A 31H1 V25 NC is a flame retardant polyamide PA66, reinforced with 25% of glass heat stabilised, for injection moulding.

*Previously TECHNYL A 32G1 BLACK TECHNYL PROTECT A 32G1 BK is a polyamide 66 based on a brominated flame retardant system, unreinforced, heat stabilized, for injection molding.

*Previously TECHNYL A 50H1 BLACK TECHNYL PROTECT A 50H1 BK is an unreinforced polyamide 66 based on a non-phosphorous and non-halogenated flame retardant system, heat stabilized, for injection moulding. This flame retardant grade, offers excellent filling qualities combined with good stiffness.

*Previously TECHNYL A 50H1 NATURAL TECHNYL PROTECT A 50H1 NC is an unreinforced polyamide 66 based on a non-phosphorous and non-halogenated flame retardant system, heat stabilized, for injection moulding. This flame retardant grade, offers excellent filling qualities combined with good stiffness.

*Previously TECHNYL A 50X1 GREY 2572 TECHNYL PROTECT A 50X1 GY 2572 is an unreinforced blend of polyamide 66 and 6 based on a non-phosphorous and non-halogenated flame retardant system, heat stabilized, for injection moulding. This flame retardant grade, UL94 V0 at 0.4mm, offers excellent filling qualities together with good stiffness.

*Previously TECHNYL A 50X1 GREY 2607 TECHNYL PROTECT A 50X1 GY 2607 is an unreinforced blend of polyamide 66 and 6 based on a non-phosphorous and non-halogenated flame retardant system, heat stabilized, for injection moulding. This flame retardant grade, UL94 V0 at 0.4mm, offers excellent filling qualities together with good stiffness.

TECHNYL PROTECT A 50X1 GY 2670 LP is an unreinforced blend of polyamide 66 and 6 based on a non-phosphorous and non-halogenated flame retardant system, heat stabilized, for injection moulding. This flame retardant grade, UL94 V0 at 0.4mm, offers excellent filling qualities together with good stiffness. This grade has been designed to be laser printable. *Previously TECHNYL A 50X1 GREY 2670 LP

*Previously DOMAMID FR 66/6V0M BKXB TECHNYL A 50X2 BK XB is an unreinforced flame retardant polyamide blend of polyamide 6.6 and 6, heat stabilized, for injection moulding. This halogen free flame retardant grade is UL94 V0 at 0,4mm and offers good Glow Wire and CTI performances.