Permanently Anti-static - ESD Protection - Preliminary Datasheet

Polycasa TPU (Thermoplastic Polyurethane) is a brand name for TPU extruded sheets produced by Polycasa. The sheet can be delivered in flat sheets, palletised, or alternatively in rolls, as per customers requirements. This product offers superior abrasion resistance, tear resistance and other advanced mechanical properties. CHARACTERISTICS - Extreme resistance to wear and tear. - Reduction of noise. - Repair/replacement indicator layer: (After wearing out, the black abrasion layer reveals a red indicator layer, signalling it should be repaired or replaced. This is key to preventative maintenance and allows for better production planning by avoiding unforeseen downtime, resulting in increased productivity.) APPLICATIONS - Conveyor belt armouring. - Wear liners for: chutes, truck liners, cyclones, magnetic separators, cones and rotary mills. Polycasa TPU can be installed either by mechanical fastening or by using polyurethane glue on metal, wooden or concrete surfaces. Once bonded to a metal surface, maintenance of TPU is very simple. The damaged surface is ground out, cleaned and the new TPU patch can be bonded into the damaged area. Repair work takes less than an hour to complete and can be carried out in the absence of a clean environment. Therefore, repairs can be done underground, for example in the mine. This means machinery does not have to be brought to the surface, reducing maintenance and repair time. Polycasa TPU is 100% recyclable, therefore all side cuts can be reused.

CHARACTERISTICS: Rigid, Toughness, dimensional stability, biocompatiblity, and chemical resistance. Quadraplast™ is a family of aromatic rigid thermoplastic polyurethanes that are designed for injection molded biostable applications such as connectors, fittings, luers, and hubs. Quadraplast offers a unique combination of toughness, dimensional stability, biocompatiblity, and chemical resistance. Quadraplast is typically used to replace nylon and polycarbonate based engineered plastics where coloring or stress cracking may be an issue.

Base Resin

Base Resin

Glass Fiber

Glass Fiber

Glass Fiber

Glass Fiber

Glass Fiber

Glass Fiber

Carbon Fiber

Carbon Fiber

Stainless Steel Fiber - Glass Fiber - Electrically Conductive - EMI/RFI Shielding

SAXACOND 11E6-0000 is an easy flowing and antistatic TPU injection molding type with excellent adhesion to polyamide in 2K injection molding process and a pleasant feel (soft touch).

Elastomer-modified TPU

Tepex® dynalite 108-FG290(x)/45%Filament Glass - TPU consolidated composite laminate The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.

Tepex® dynalite 208-C200(x)/45%3K Carbon - TPU consolidated composite laminate The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.

Tepex® dynalite 408-C200(2)-FG290(1)/45%3K Carbon - Filament Glass core - TPU consolidated composite laminate The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. Standardized testing is not applicable for a semi-finished sheet thickness < 1.0 mm. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.

Tepex® dynalite 408-C200(2)-FG290(10)/45%3K Carbon - Filament Glass core - TPU consolidated composite laminate The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.

Tepex® dynalite 408-C200(2)-FG290(4)/45%3K Carbon - Filament Glass core - TPU consolidated composite laminate The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.

Tepex® dynalite 408-C200(2)-FG290(4)/45%3K Carbon - Filament Glass core - TPU consolidated composite laminate The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.

Tepex® dynalite 408-C200(2)-FG290(6)/45%3K Carbon - Filament Glass core - TPU consolidated composite laminate The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.

Tepex® dynalite 408-C200(2)-FG290(8)/45%3K Carbon - Filament Glass core - TPU consolidated composite laminate The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.

Hardness 80 shore A, Plasticized, Thermoplastic Polyurethane

Hardness 80 shore A, Free from plasticizers, Thermoplastic Polyurethane

Hardness 90 shore A, Plasticized, Thermoplastic Polyurethane

Hardness 90 shore A, Plasticized, Thermoplastic Polyurethane

Hardness 92 shore A, Plasticized, Thermoplastic Polyurethane

THERPUS F Series is a polyurethane powder developed by Sanyo Chemical Industries using original technology for slush molding. The product has a sharp particle size distribution that enables it to have good meltability and excellent formability properties. 2. Typical Applications: - Molding skins for automotive interior parts such as door panels, instrument panels and center consoles. 3. Product Features: - The excellent molding characteristics of THERPUS F permit greater design flexibility for automotive interior parts due to excellent powder flow and melting properties. - The skin of THERPUS F shows "excellent soft feel" and "good heat and UV aging properties". - The low melt viscosities of THERPUS F permit mold temperature reduction of 20-40 C compared with PVC. Thus, it can reduce the energy required and increase production capacity. - The skin of THERPUS F can make a contribution to "automotive weight reduction" and "cost reduction of slush molding material". 4. International Compliance: (All components are listed or authorized as exempt from registration) - TSCA, US - ENCS, Japan - ECL, Korea (Contact our Sales Department to confirm any availability and limits) - DSL, Canada - IECSC, China

Very flexible thermoplastic polyurethane (TPU) based on BASF raw materials designed for Fused Filament Fabrication. Ultrafuse TPU 80A LF is one of the most flexible filaments on the market. This filament can be printed on many open platforms and works for both Bowden and direct drive extruders. This is a perfect filament for applications that require toughness and flexibility to the max. No other filament on the market can match the printability of this extremely flexible filament.

BASF thermoplastic polyurethane (TPU) based filament for Fused Filament Fabrication. Ultrafuse TPU 85A comes in its natural white color. Chemical properties (e.g. resistance against particular substances) and tolerance for solvents can be made available, if these factors are relevant for a specific application. Generally, these properties correspond to publicly available data on polyether based TPUs. This material is not FDA conform. Good flexibility at low temperature, good wear performance and good damping behavior are the key features of Ultrafuse TPU 85A.

Thermoplastic polyurethane powder for HP Jet Fusion Printers Ultrasint™ TPU01 is a multi-purpose material for application in Multi Jet Fusion. Parts produced with this material offer a balanced property profile with good flexibility, shock absorption and the possibility to print very fine structures with a high level of detail. In addition, the material is easy to print, and has good UV and hydrolysis resistance. Ultrasint™ TPU01 is only processable in HP Multi Jet Fusion printers. Typical applications are: - Sports & Leisure - Footwear - Transportation Industry - Jigs & Fixtures

Polyurethane-based Thermoplastic Elastomer (TPE-U). This compound is used for overmolding onto a variety of polyamide substrates. Available Modifications: Exterior UV Package | FDA Compliance

Polyurethane-based Thermoplastic Elastomer (TPE-U). This compound is used for overmolding onto a variety of polyamide substrates. Available Modifications: Exterior UV Package | FDA Compliance

Polyurethane-based Thermoplastic Elastomer (TPE-U). This compound is used for overmolding onto a variety of polyamide substrates. Available Modifications: Exterior UV Package | FDA Compliance