This is special grade of Thermoplastic Polyolefin Elastomer

Good Processability. Overmold to ABS and PC. Drying is typically required. Drying Temperature is 176°F (80°C) for 2 hours.

Good Processability, Good Abrasion resistance. Soft touch rubbery feel. Overmold to ABS, PC and PETG. Typical applications include: non-slip grip, consumables, household goods. Drying is typically required. Drying Temperature is 176°F (80°C) for 2 hours.

Soft touch rubbery feel. Good processability and colorability Typical application include: general purpose extrusion, consumables, industrial, overmold to PVC and ABS Drying is not typically required. Drying Temperature is 120°F (49°C) for 3 hours if there is surface moisture.

Soft touch rubbery feel. Overmold onto ABS and PC substrates for houseware, electronics and medical devices. Drying is not typically required. Drying Temperature is 120°F (49°C) for 3 hours if there is surface moisture.

Rubbery and soft touch feel. Overmolding onto PC and ABS substrates.

Drying is typically required. Drying Temperature is 176°F (80°C) for 2 hours. Soft touch rubbery feel. Overmold to ABS, PC and PET for houseware, electronics and seal applications.

Drying is typically required. Drying Temperature is 176°F (80°C) for 2 hours. Soft touch rubbery feel. Overmold to ABS, PC and PET for houseware, electronics and seal applications.

FDA grade; Low Compression Set. Good Abrasion resistance. Soft touch rubbery feel. Overmold to ABS, PC and PET for houseware, electronics and seal applications. Typical applications include: sporting goods, electronics seals, consumables and others. Drying is typically required. Drying Temperature is 176°F (80°C) for 2 hours.

Clear grade; Good Abrasion resistance. Soft touch rubbery feel, good colorability. Overmold to ABS, PC and PET for houseware, electronics and seal applications. Typical applications include: sporting goods, electronics seals, and others. Drying is typically required. Drying Temperature is 176°F (80°C) for 2 hours.

Suitable for injection molding and extrusion process. Comply with USP Class IV and ISO 10993. Compatible with major sterilization processes. Overmold with PP substrate. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

Suitable for injection molding and extrusion process. Comply with USP Class IV and ISO 10993. Compatible with major sterilization processes. Overmold with PP substrate. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

C SERIES - CLEAR AND ULTRA-SOFT TPE GRADES Ultra-Soft and Transparent, Comfortable Cushion, Good Processability and Colorability. Typical applications include: Personal Care, Sporting Goods, Caps & Closures, Tubing & Gaskets, Footwear.

C SERIES - CLEAR AND ULTRA-SOFT TPE GRADES Characteristics - Excellent clarity - Overmold adhesion to polypropylene - Ultrasoft TPEs with gel-like properties - Soft and cushioning comfort - Superior colorability - PVC, silicone, and latex free Typical Applications - Consumer - Packaging - Healthcare - Electronics

C SERIES - CLEAR AND ULTRA-SOFT TPE GRADES Ultra-Transparent, Comfortable Cushion, Good Processability, and Good Colorability Typical Application include shoe insoles/inserts, Overrmolding onto PP substrates, houseware, and grips

C SERIES - CLEAR AND ULTRA-SOFT TPE GRADES Ultra-Soft and Transparent, Comfortable Cushion, Good Processability, and Good Colorability Typical applications include Personal Care, Sporting Goods, Caps & Closures, Tubing & Gaskets, Footwear

C SERIES - CLEAR AND ULTRA-SOFT TPE GRADES Soft Touch, Good Processability, Good Colorability, Recyclable Material Typical applications include Non-Slip Grip, Modifier to Polypropylene, Sporting Goods, Household Goods, Industrial

Suitable for injection molding and extrusion process. Comply with USP Class IV and ISO 10993. Compatible with major sterilization processes. Overmold with PP substrate. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

C SERIES - CLEAR AND ULTRA-SOFT TPE GRADES Soft Touch Rubbery Feel, Comfortable Cushion, Good Processability and Colorability Typical applications include Personal Care, Sporting Goods, Caps & Closures, Tubing & Gaskets, Footwear.

Thermoplastic Olefin with excellent thermoformability and durability. Eco-friendly with good dimensional stability, heating aging and tensile property. Compliance with REACH and ROHS regulations. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose food grade extrusion grade. Coextrusion with PP & PE substrate. Soft touch and rubbery feel. Excellent sealing property and printability. FDA/EU/GB compliance. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose extrusion grade. Soft touch and rubbery feel. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

Soft Touch Rubbery Feel, Low Compression Set, Good Weather Resistance and High Heat Resistance. Typical applications include Flexible Profiles, Edge Trim Seals, Hose and Tubing, Automotive and Consumer Goods. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose extrusion grade. Coextrusion with PP substrate. Soft touch and feel. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

Thermoplastic elastomer with excellent strength and toughness. Good melt strength, excellent heat and abrasion resistant. Overmold onto PP substrate. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hour if there is surface moisture.

General purpose extrusion grade. Coextrusion with PP/TPV substrate. Drying is required. Drying Temperature is 175°F (80°C) for 2 hours.

This is UV grade of D67 SERIES with 80 shore A hardness - EASY PROCESSING TPES FOR EXTRUSION APPLICATIONS Characteristics - Good melt strength - Soft touch - Smooth surface with dry feel - Good weather and heat resistance - Low compression set - Easy processing Typical Applications - Industrial - Packaging - Consume - Heathcare

This is UV grade of D67 SERIES with 80 Shore A hardness - EASY PROCESSING TPES FOR EXTRUSION APPLICATIONS Characteristics - Good melt strength - Soft touch - Smooth surface with dry feel - Good weather and heat resistance - Low compression set - Easy processing Typical Applications - Industrial - Packaging - Consume - Heathcare

General purpose extrusion grade. Coextrusion with PP substrate. Soft touch and rubbery feel, low compression set with good processability and weatherability. Typical applications include: Window and Door Seals, Profiles, Gaskets, Industrial Padding and overmold to PP substrate. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose extrusion grade. Coextrusion with PP substrate. Soft touch and rubbery feel. : Soft Touch Rubbery Feel, Low Compression Set, Good Processability and Weatherability. Typical applications include: Window and Door Seals, Profiles, Gaskets, Industial Padding and others. Overmold to PP Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose extrusion grade. Coextrusion with PP substrate. Soft Touch Rubbery Feel, Low Compression Set with Good Processability and Weatherability. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose extrusion grade. Coextrusion with PP substrate. Soft touch and rubbery feel. : Soft Touch Rubbery Feel, Low Compression Set, Good Processability and Weatherability. Typical applications include: Window and Door Seals, Profiles, Gaskets, Industial Padding and others. Overmold to PP Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose extrusion grade. Coextrusion with PP substrate. Soft touch and rubbery feel. Low Compression Set, Good UV Resistance, Good Heat and Chemical Resistance, Easy to Process Typical applications include: Window and Door Seals, Profile Extrusion, Gaskets, Automotive, Overmold to PP Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose extrusion grade. Coextrusion with PP substrate. Soft touch and rubbery feel. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose extrusion grade thermoplastic elastomer. Coextrusion with PP substrate. Soft touch and rubbery feel. Drying is not typically required. Drying Temperature is 175°F (80°C) for 2 hours if there is surface moisture.

General purpose halogen free flame-retardant extrusion grade. Coextrusion with PP substrate. Drying is required. Drying Temperature is 175°F (80°C) for 2 hours.

HIGH PERFORMANCE FLAME RETARDANT GRADES Characteristics: Halogen Free, Low smoke emission, Designed to meet UL 94 V0, Excellent weathering and UV resistance, Good chemical resistance Ideal for: Electrical and Electronics, Wire and Cable and Industrial

F SERIES - HIGH PERFORMANCE FLAME RETARDANT GRADES Characteristics - Halogen Free - Low smoke emission - RoHs compliant - Designed to meet UL 94 V0 - Excellent weathering and UV resistance - Good chemical resistance - Easy processing Typical Applications - Electrical and Electronics, Wire and Cable - Industrial - Connectors and seals, grommets