75 SHORE D POLYURETHANE BR-75D REV 1 Brushable is a 75 Shore D rigid high impact material. This product is designed to be either brushed into a mold to create a durable hard-shell part, or brushed onto the back of silicone glove molds to create a tough “mother mold” or shell. - RoHS/REACH Compliant - Popular for Parts & Molds - Easy to Pigment - Special Effects & Props - High Impact - Easy Mix Ratio

A CURATIVE POLYURETHANE GEL PC-10 A/B is a low viscosity, 15 Shore A polyurethane gel system originally designed as a re-enterable encapsulant for a variety of electronic potting applications. It features excellent wetting and penetration properties. PC-10 A/B is easily re-enterable by hand or tools. - Resists moisture absorption and is moisture insensitive during handling - Does not contain MOCA, MDA, or TDI - Very easy to use - Non-foaming - Non-corrosive and compatible with electrical components - Cures at room temperature

20 SHORE 00 POLYURETHANE GEL PC-12 A/B is a two component polyurethane gel system originally designed as a slow rebound and vibration dampening material. Product Highlights: - Non-foaming, odorless - Cures at room temperature - Slow rebound - RoHS/REACH Compliant - Easy to use - Vibration dampening

3-5 lb. VARIABLE DENSITY, FLEXIBLE FOAM TC-266 A/B ‘PolySoft 1' is a two-component, flexible polyurethane foam. The cured material feels similar to a soft furniture cushion. BJB's 6800 Series Pigments may be added to the "B" side for developing a wide range of colors. End users can adjust firmness with a slight ratio change as listed below. Common applications are prototypes, prosthetics, medical training devices, movie special effects props and more. This material is frequently molded behind flexible polyurethane skin materials such as BJB's SkinFlex line or other BJB elastomers. Note: TC-266 at a ratio of 50/100 pbw produces a soft, quick recovery foam with a density of 3 pounds. At 30/100 pbw, the result will be a softer, slower recovery foam with a density of 5 pounds.

4 LB FLEXIBLE FOAM TC-277 A/B is a two-component, flexible polyurethane foam. The cured material feels similar to foam sandals. BJB’s 6800 Series Pigments may be added to the “B” side for developing a wide range of colors. End users can adjust firmness with a slight ratio change as listed below. Common applications are prototypes, prosthetics, medical training devices, movie special effects props and more. This material is frequently molded behind flexible polyurethane skin materials such as BJB’s FP, F, M, and L line or other BJB elastomers. Note: TC-277 ‘PolySoft 3' at a ratio of 75/100 pbw produces a firm, quick recovery foam. At 60/100 pbw, the result will be a slightly softer foam.

FIRE RETARDANT FLEXIBLE FOAM 4 LB DENSITY TC-278 FR A/B is a soft, 4 lb. water blown flexible foam with fire retardant properties. This product was developed due to the ongoing demand for fire retardant foams in the industries of Movie Special Effects, Theme Parks, Haunted Houses, and Theatrical Performance. Firmness of the foam can be controlled by mold temperature and the amount loaded in the mold. BJB pigments may be added to the “B” side for developing a wide range of colors. TC-278 FR A/B can be hand mixed, machine dispensed, or mixed with a Jiffy Mixer®. - Prototypes - Medical training devices - Prosthetics - Movie props/ Special effects

FIRE RETARDANT FLEXIBLE FOAM 6 LB DENSITY TC-296 FR A/B is a 6 lb. medium density, water blown flexible foam with fire retardant properties. This product was developed due to ongoing demand for fire retardant foams in the industries of Movie Special Effects, Theme Parks, Haunted Houses, and Theatrical Performance. Firmness of the foam can be controlled by mold temperature and the amount loaded in the mold. BJB’s 6800 Series Pigments may be added to the “B” side for developing a wide range of colors. TC-296 FR A/B can be hand mixed, machine dispensed, or mixed with a Jiffy Mixer®. - Prototypes - Medical training devices - Prosthetics - Movie props/ Special effects

RIGID POLYURETHANE FOAM 10# DENSITY The TC-300 A/B polyurethane foam system is a series of rigid, closed cell foams available in a variety of densities. The TC-300 can be easily mixed by hand in small batches using a rapid, vigorous mixing action or by using a Jiffy Mixer® in a drill to provide a high-shear mix in small to large quantities. For low to high production, these foam systems can also be machine dispensed using BJB's Centerpointe Meter-Mix equipment. Cured parts can be sanded, stapled, painted or stained within a short time after demolding. Also available in 6#, 10#, and 16# densities. - Easy to hand mix or machine cast - Flows well into mold cavities - Fast Demolds - Excellent physical properties

RIGID POLYURETHANE FOAM 3# DENSITY The TC-300 A/B polyurethane foam system is a series of rigid, closed cell foams available in a variety of densities. The TC-300 can be easily mixed by hand in small batches using a rapid, vigorous mixing action or by using a Jiffy Mixer® in a drill to provide a high-shear mix in small to large quantities. For low to high production, these foam systems can also be machine dispensed using BJB's Centerpointe Meter-Mix equipment. Cured parts can be sanded, stapled, painted or stained within a short time after demolding. Also available in 6#, 10#, and 16# densities. - Easy to hand mix or machine cast - Flows well into mold cavities - Fast Demolds - Excellent physical properties

RIGID POLYURETHANE FOAM 6# DENSITY The TC-300 A/B polyurethane foam system is a series of rigid, closed cell foams available in a variety of densities. The TC-300 can be easily mixed by hand in small batches using a rapid, vigorous mixing action or by using a Jiffy Mixer® in a drill to provide a high-shear mix in small to large quantities. For low to high production, these foam systems can also be machine dispensed using BJB's Centerpointe Meter-Mix equipment. Cured parts can be sanded, stapled, painted or stained within a short time after demolding. Also available in 6#, 10#, and 16# densities. - Easy to hand mix or machine cast - Flows well into mold cavities - Fast Demolds - Excellent physical properties

RIGID 75 SHORE D POLYURETHANE CASTING SYSTEM TC-800 A/B is an easy to use rigid urethane casting material. TC-800 A/B exhibits excellent physical properties, very low viscosity, high heat capability and quick demold times. In addition, this system is economically priced. The one-to-one volume ratio makes it perfect for use with dispensing equipment. TC-800 A/B is a great product when ABS type parts with a quick turnaround are required. Features a non-mercury based catalyst system.

73 SHORE D POLYURETHANE CASTING SYSTEM TC-802 A/B is an easy to use rigid urethane casting material. TC-802 A/B is an extremely low viscosity system with quick demold times. This system also exhibits good physical and heat capabilities. In addition, this system is economically priced. The one-to-one volume ratio makes it perfect for use with dispensing equipment. TC-802 A/B is a great product when ABS-type parts with a quick turnaround are required.

75 SHORE D URETHANE SYSTEM CASTING SYSTEM TC-803 A/B produces a 75 Shore D material that provides excellent physical properties. TC-803 A/B was designed for a wide variety of part making applications. For longer work times, consider TC-805. PRODUCT HIGHLIGHTS: - RoHS/REACH Compliant - 6 - 7 minute work time - Odorless, clean white - 1 - 2 hour demold time - Excellent for vacuum or pressure casting - Low viscosity

75 SHORE D URETHANE CASTING SYSTEM TC-803 Jet Black A/B is a low viscosity, rapid setting, rigid urethane compound that is pre-pigmented black. It produces a 75 Shore D material that provides excellent physical properties. TC-803 Jet Black A/B was designed for a wide variety of part making applications. - RoHS/REACH Compliant - 6 - 7 minute work time - 1-2 hour demold time - Non mercury - Excellent for vacuum or pressure casting - Low viscosity

75 SHORE D URETHANE SYSTEM CASTING SYSTEM TC-804 A/B is a user friendly, low viscosity, 75D rigid urethane plastic that cures to a white color. This system features a convenient 1:1 by volume mixing ratio, 7-8 minutes working time, good heat resistance, and low moisture sensitivity producing tough, non-brittle castings. In many cases vacuum degassing is not required thanks to its low viscosity and low surface tension properties. Excellent at reproducing fine details without trapping air bubbles. Great for taxidermy, prototypes, model making, rotocasting, and parts of all kinds. - RoHS/REACH Compliant - 7 - 8 minute work time - 30 - 60 minute demold time - Low viscosity

75 SHORE D URETHANE CASTING SYSTEM TC-804 Jet Black A/B is a user friendly, low viscosity, 75D rigid urethane plastic that cures to a Jet Black color. This system features a convenient 1:1 by volume mixing ratio, 7-8 minutes working time, good heat resistance, and low moisture sensitivity producing tough, nonbrittle castings. In many cases vacuum degassing is not required thanks to its low viscosity and low surface tension properties. Excellent at reproducing fine details without trapping air bubbles. Great for taxidermy, prototypes, model making, rotocasting, and parts of all kinds. - RoHS/REACH Compliant - 7 - 8 minute work time - 30 - 60 minute demold time - Low viscosity

75 SHORE D POLYURETHANE CASTING SYSTEM TC-805 A/B produces a 75 Shore D material that provides excellent physical properties. TC-805 A/B was designed for a wide variety of part making applications. For a faster work time/demold time, consider TC-803. - RoHS/REACH Compliant - 15-20 minute work time - 3-4 hour demold time - Excellent for vacuum or pressure casting - Odorless, clean white - Low viscosity

RIGID 75 SHORE D POLYURETHANE CASTING SYSTEM TC-806 A/B produces a 75 Shore D material that provides excellent physical properties. TC-806 A/B was designed for a wide variety of part making applications. - Large mass pours - Infusion of composite fabrics - Odorless, clean white color - High heat distortion temperature - Low viscosity - RoHS/REACH compliant

78 SHORE D URETHANE CASTING SYSTEM TC-808 A/B is a low viscosity, rapid setting, and rigid urethane compound. This system will cure quickly to a hard, tough casting. TC-808 A/B is generally insensitive to moisture during and after cure and will readily bond to itself if stage pours are required. TC-808 A/B is recommended in applications where a "thermoplastic feel" is desired.

78 SHORE D URETHANE CASTING SYSTEM TC-808 Jet Black A/B is a low viscosity, rapid setting, rigid urethane compound that is pre-pigmented black. This system will cure quickly to a hard, tough casting. TC-808 A/B is generally insensitive to moisture during and after cure and will readily bond to itself if stage pours are required. TC-808 A/B is recommended in applications where a "thermoplastic feel" is desired. - Prototyping - Molding - Non-mercury - Special Effects - Slush/Roto Casting - Tough, Heat Resistant

LIGHTCAST TC-812 REV 1 A/B Lightcast is a lightweight, rigid, quick setting, low shrinkage, low viscosity filled cast urethane that weighs 30-40% less than most conventional unfilled urethane systems. Parts made from TC-812 REV 1 can float in the water and its fast curing properties allow parts to be demolded in 1 hour or less. TC-812 REV 1 is ideal for carving, sanding, drilling, machining, and modifying parts due to its low-density filler content. This product is perfect for fast patterns, mold cores, vacuum forming bucks, temporary molds, lightweight models, fishing lures, and much more. - RoHS/REACH Compliant - Mercury and Phthalate Free - Easy to Paint or Pigment - Low Density/Lightweight - Fast Processing - Economical - Low Shrinkage - Easy to Machine/Sand/Carve - Floats/Buoyant

75 SHORE D POLYURETHANE CASTING SYSTEM TC-850 A/B produces a high impact rigid 75 Shore D material that is commonly used to make computer housings, models of all kinds, artwork, and can also be used for electronic component encapsulation. It provides a working time of 6 - 7 minutes. PRODUCT HIGHLIGHTS: - RoHS/REACH Compliant - One to two hour demold time - High impact rigid material - Excellent for vacuum or pressure casting - Odorless, clean white - Low viscosity

78 SHORE D POLYURETHANE CASTING SYSTEM TC-851 A/B produces a high impact rigid 78 Shore D material that is commonly used to make computer housings, models of all kinds, artwork, and can also be used for electronic component encapsulation. It provides a working time of 6-7 minutes. Product Highlights: - Low viscosity - RoHS/REACH compliant - High impact rigid material - Odorless, clean white color - 1 - 2 hour demold time - Excellent for vacuum or pressure casting

78 SHORE D POLYURETHANE CASTING SYSTEM TC-852 A/B produces a high impact, rigid 78 Shore D material that is commonly used to make computer housings, models of all kinds, artwork, and can also be used for electronic component encapsulation. TC-852 A/B is an excellent hand-castable product that produces parts with heat deflection temperatures up to 220°F (104°C). Product Highlights: - Non-Mercury Based Catalyst System - RoHS compliant - High impact rigid material - Odorless, clean white color - One to two hour demold time - Excellent for vacuum or pressure casting - Low viscosity - Exhibits exceptional high heat distortion temperature

RIGID 84 SHORE D POLYURETHANE CASTING SYSTEM TC-854 is an extremely stiff, high impact, translucent material making it ideal when exact color matching is required. When coupled with the low viscosity, low shrink and high heat deflection temperature, this material is always a popular choice for a wide variety of applications. Product Highlights: - RoHS/REACH compliant - Odorless, Translucent - High impact strength - Low viscosity - High heat distortion temperature - Excellent for hand, vacuum, or pressure casting

RIGID 84 SHORE D POLYURETHANE CASTING SYSTEM TC-857 A/B is a rigid 84 Shore D polyurethane system that exhibits exceptional physical properties. It is a high performance material that features high heat deflection capability and low shrinkage. TC-857 is a clear casting material that allows for unrestricted tinting and precise color matching. This product is ideal for producing intrinsically colored parts requiring a non-painted finish. This system can be easily processed by hand or with meter-mix-dispense, pressure or vacuum cast equipment. - Exhibits high heat distortion temperature - Excellent impact resistance - Odorless, clear; easy to tint or color - Excellent for hand, vacuum or pressure casting - Exceptional clarity

RIGID 60 SHORE D POLYURETHANE CASTING SYSTEM TC-861 REV 1 A/B is translucent and extremely easy to color. This tough “LDPE” like product is very user friendly. This versatile material easily demolds in less than 3 hours and has extremely high impact. - RoHS/REACH Compliant - Translucent, Easy to Color - Low Viscosity - High Impact - Similar to LDPE - Demold in 2 Hours - Mercury/Phthalate Free

65 SHORE D POLYURETHANE CASTING SYSTEM TC-865 A/B is a medium viscosity, economical and easy to handle two component urethane compound. This system cures relatively fast at room temperature producing tough, impact resistant castings.

RIGID 70 SHORE D POLYURETHANE CASTING SYSTEM FIRE RETARDANT TC-870 FR A/B is a RoHS compliant, fire retardant, polyurethane system that produces a tough 70 shore D material. This system has high impact strength and a remarkable heat deflection temperature for a 70 Shore D fire retardant material. The TC-870 FR A/B may in some applications be post cured without having to use fixtures. - UL 94V-0 Listed, flammability rating at 0.125" thickness (File# E174527) - High heat resistance - RoHS/REACH compliant - High impact - 9-10 minute work time

RIGID 70 SHORE D POLYURETHANE CASTING SYSTEM TC-874 REV 1 A/B is an easy to pigment, translucent 70D polyurethane with a 6-minute work time. This tough high impact polypropylene-like product is user friendly with a quick demold. - RoHS/REACH Compliant - Translucent, Easy to Color - Low Viscosity - High Impact - Similar to Polypropylene - Mercury/Phthalate Free

CLEAR 78 SHORE D POLYURETHANE CASTING SYSTEM TC-878 A/B produces a high impact rigid 78 Shore D material with excellent heat resistance. This product is a clear casting system that is easy to tint or pigment. TC-878 A/B can be easily processed by hand or meter-mix dispense equipment.

CLEAR 78 SHORE D POLYURETHANE CASTING SYSTEM TC-879 A/B produces a high impact rigid 78 Shore D material with excellent heat resistance. This product is a clear casting system that is easy to tint or pigment. TC-879 A/B can be easily processed by hand or meter-mix dispense equipment.

RIGID 80 SHORE D POLYURETHANE CASTING SYSTEM TC-880 REV 1 A/B is an easy to pigment, translucent 80D polyurethane with a 5-6 minute work time. This tough high impact ABS-like product is user friendly with a quick demold. - RoHS/REACH Compliant - Transulcent, Easy to Color - Low Viscosity - High Impact - Similar to ABS - Mercury/Phthalate Free

RIGID 78 SHORE D POLYURETHANE CASTING SYSTEM FIRE RETARDANT TC-885 A/B FR REV 1 produces a high impact rigid 78 Shore D material that is commonly used to make computer housings, models, artwork, electronic component enclosures and all types of parts requiring flame retardant characteristics. It provides a working time of 6 minutes. PRODUCT HIGHLIGHTS: - Non-mercury based catalyst system - Excellent for vacuum or pressure casting - RoHS/REACH compliant - One to two hour demold time - Low viscosity - UL 94 V0 Listed (File# E174527)

RIGID 78 SHORE D POLYURETHANE CASTING SYSTEM FIRE RETARDANT TC-886 A/B FR REV 1 produces a high impact rigid 78 Shore D material that is commonly used to make computer housings, models, artwork, electronic component enclosures and all types of parts requiring flame retardant characteristics. It provides a working time of 15 minutes. PRODUCT HIGHLIGHTS: - Non-mercury based catalyst system - Excellent for vacuum or pressure casting - RoHS/REACH compliant - Low viscosity - UL 94 V0 Flammability Rating (File# E174527)

RIGID 80 SHORE D URETHANE CASTING SYSTEM TC-890 A/B incorporates a non-mercury based catalyst system that produces a tough 80 shore D material with a 5-minute work time. This system can be used to hand pour electronic housing, models of all kinds, and point of purchase items. This system is also available in a 20-minute work time (TC-892), and a 12-minute work time (TC-891). Product Highlights: - Non-mercury - RoHS compliant - Convenient mixing ratio: 1 to 1 parts by weight - Low viscosity, flows easily - Demold time: 1-2 hours at ambient temperature in a silicone rubber mold (1/8" thick section)

RIGID 80 SHORE D URETHANE CASTING SYSTEM FIRE RETARDANT This tough 80 Shore D Flame Retardant material is UL Listed with a flammability rating at 1/16 inch (1.6 mm). It's great for hand casting or machine dispensing electronic enclosures, or any parts requiring flame retardant characteristics. The 5 to 6 minute work time exhibits very low shrinkage and exceptional physical properties. Also available in a variety of work times as TC-891, 892, and 894 FR REV 1. - RoHS/REACH compliant - 5-6 minute work time - 1-2 hour demold time - UL 94V-0 Listed, flammability rating at 1/16" thickness (File# E174527)

RIGID 80 SHORE D URETHANE CASTING SYSTEM TC-891 A/B incorporates a non-mercury based catalyst system that produces a tough 80 shore D material with a 12-minute work time. This system can be used to hand pour large electronic housing, models of all kinds, and point of purchase items. This system is also available in a 20-minute work time (TC-892), and a 5-minute work time (TC-890). - Non-mercury - RoHS/REACH compliant - Convenient mixing ratio: 1 to 1 parts by weight - Low viscosity, flows easily - Demold time: 3-4 hours at ambient temperature in a silicone rubber mold (1/8" thick section)

RIGID 80 SHORE D URETHANE CASTING SYSTEM FIRE RETARDANT This tough 80 Shore D Flame Retardant material is UL Listed with a flammability rating at 1/16 inch (1.6 mm). It's great for hand casting or machine dispensing electronic enclosures, or any parts requiring flame retardant characteristics. The 12 to 14 minute work time exhibits very low shrinkage and exceptional physical properties. Also available in a variety of work times as TC-890, 892, and 894 FR REV 1. Product Highlights: - RoHS/REACH compliant - 12-14 minute work time - 3-4 hour demold time - UL 94V-0 Listed, flammability rating at 1/16" thickness (File# E174527)

RIGID 80 SHORE D URETHANE CASTING SYSTEM TC-892 A/B incorporates a non-mercury based catalyst system that produces a tough 80 shore D material with a 20-minute work time. This system can be used to hand pour large electronic housing, models of all kinds, and point of purchase items. This system is also available in a 5-minute work time (TC-890), and a 12-minute work time (TC-891). Product Highlights: - Non-mercury - RoHS/REACH compliant - Convenient mixing ratio: 1 to 1 parts by weight - Long working time: 20 minutes - Low viscosity, flows easily - Demold time: 5-6 hours at ambient temperature in silicone rubber mold (1/8" thick section).