CCBA-8725BK is a semiconductive compound and has an excellent scorch stability and good surface smoothness, so it is used for the triple coextrusion head. CCBA-8725BK has a low adhesion level in the range 2~4 kg/0.5inch. CCBA-8725BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ICEA S-66-524, S-94-649 - BS 6622 - AEIC CS5, CS8 - IEC 60502 Applications CCBA-8725BK can be used for strippable typed, insulation shielding of medium voltage(up to 72 kV) power cables.

CCBA-8735BK is a semiconductive compound and has an excellent scorch stability and good surface smoothness, so it is used for the triple coextrusion head. CCBA-8735BK has a low adhesion level in the range 2~4 kg/0.5inch. CCBA-8735BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ICEA S-66-524, S-94-649 - BS 6622 - AEIC CS5, CS8 - IEC 60502 Applications CCBA-8735BK can be used for strippable typed, insulation shielding of medium voltage(up to 72 kV) power cables.

CTBA-8720BK is a semiconductive compound and has an excellent scorch stability and good surface smoothness, so it is used for the triple coextrusion head. CTBA-8720BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ICEA S-66-524, S-94-649 - BS 6622 - AEIC CS5, CS7 - VDE 0263, 0273 - IEC 60502 Applications CTBA-8720BK can be used for bonded typed, conductor and insulation shielding of medium voltage (up to 72kV) power cables.

CTBA-8730BK is a semiconductive compound and has an excellent scorch stability and good surface smoothness, so it is used for the triple coextrusion head. CTBA-8730BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ICEA S-66-524, S-94-649 - BS 6622 - AEIC CS5, CS7 - VDE 0263, 0273 - IEC 60502 Applications CTBA-8730BK can be used for bonded typed, conductor and insulation shielding of medium voltage (up to 72 kV) power cables

CTBA-8740BK is a semiconductive compound and has an excellent electrical conductivity, scorch stability and surface smoothness. CTBA-8740BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - IEC 60840, 62067 - ANSI/ICEA 108-720-2004 Applications CTBA-8740BK can be used for bonded typed, conductor and insulation shielding of high voltage (up to 170 kV) power cables.

CTBA-8745BK is a semiconductive compound and has an excellent electrical conductivity, scorch stability and surface smoothness. CTBA-8745BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - IEC 60840, 62067 - ANSI/ICEA 108-720-2004 Applications CTBA-8745BK can be used for bonded typed, conductor and insulation shielding of high voltage (up to 230 kV) power cables.

Hifax 7254 XEP is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is used for injection molding. It features high melt flow rate, with optimal impact/stiffness balance with controlled shrinkage. It is designed mainly for automotive applications. The grade is available in natural pellet form.

Hifax 7430 XEP is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell's proprietary Catalloy process technology. It is a high melt flow, medium-high flexural modulus, highly crystalline copolymer with good balance of impact and stiffness. It is primarily used in interior trim applications requiring low temperature high speed impact performance. It is also used as a component in compounded materials for automotive and industrial applications. The grade is available in natural pellet form.

Hifax CA 10 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell proprietary Catalloy process technology. It is suitable for industrial applications where a combination of good processability and excellent softness is required. It is widely used as building block resin for flexible water-proofing membranes. Hifax CA 10 A exhibits low stiffness, low hardness and good impact resistance. The grade is available in natural pellet form.

Hifax CA 1133 A, is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is used for injection molding. Hifax CA1133 A is in particular suitable for high impact strength applications, even at low temperature. The product is characterised both by medium rigidity and a very good processability as well as and excellent paintability. The grade is available in natural pellet form. For regulatory compliance information see Hifax CA 1133 A Regulatory Affairs Product Stewardship Information/Certification Data Sheet (RAPIDS), which can be found on www.polymers.lyondellbasell.com.

Hifax CA 138 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. This grade is suitable for use in compounds as impact modifier, to give excellent processability whilst maintaining optimum mechanical properties. The grade is available in natural pellet form.

Hifax CA 207 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is suitable for injection molding applications as well as for wire & cable extrusion process. As an impact modifier for compounding applications, it can be blended with other polyolefinic resins for a better shrinkage control and to improve the low temperature impact resistance. It does not contain any slip nor anti-blocking agents. The grade is available in natural pellet form.

Hifax CA 212 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. The grade is available in natural pellet form.

Hifax CA 387 A is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell's proprietary Catalloy process technology. It has high melt flow and an excellent balance of impact, stiffness, processability and paintability. Hifax CA 387 A is primarily used for painted automotive bumper fascias that require high durability, and for other injection molded parts with paintable and weatherable requirements. It is also utilized as a component in compounded materials for a wide range of industrial applications. The grade is available in natural pellet form.

Hifax CA 60 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. Due to the high fluidity Hifax CA 60 A shows high compatibility to fillers and to flame retardant additives as well as to other polyolefins. The grade is available in natural pellet form.

Hifax CA 7201 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is primarily used for bumper and interior/exterior trim applications in Automotive. It has a very high impact performance, reduced shrinkage and a very good paintability. The material also has a high level of processability. The grade is available in natural pellet form.

Hifax CA 7271 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is designed for injection molding controlled shrinkage applications (e.g. bumpers). Hifax CA 7271 A exhibits high melt flow rate with good impact/stiffness balance and reduced shrinkage. The grade is available in natural pellet form.