LF0720/21AF is a LLDPE that shows low haze and high clarity associated with good balance of mechanical properties, processing performance and sealability. Additive: Slip Medium; Antiblocking Medium; Processing Aid Medium Applications: Blends with HDPE, Blends with LDPE, Technical films, Technical films for automatic packaging Process: Blown Film Extrusion

LF1020/21AF is a Linear Low Density Polyethylene, with good balance of mechanical properties, processing performance and sealability. Additive: Slip Medium; Antiblocking Medium; Processing Aid Medium Applications: Blends with HDPE, Blends with LDPE, Technical films, Technical films for automatic packaging

Braskem LF320 is a Linear Low Density Polyethylene, with butane copolymer, developed for cast film extrusion. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties. It contains antioxidant additives. Applications: Stretch films Processes: Cast film extrusion

LF321FC is a Linear Low Density Polyethylene produced by gas phase process, specially developed for XLPE silane cross-linking in monosil process, to use in insulation and jacketing for low voltage wires and cables. This product contains suitable additives, low oligomer rate and very low gel content. Applications: Monosil system, Wire insulation, Low voltage XLPE insulation Process: Wire and Cable Extrusion

LH0820/30AF is a LLDPE that offers outstanding processability combined with excellent mechanical properties. Very low gel amount. Additive: Processing Aid, Antiblocking. Applications: Industrial Sacks, Bags with valve, Blends with HDPE, Blends with LDPE, Laminates Processes: Blown Film Extrusion

LH118 is a Linear Low Density Polyethylene developed for blown film extrusion. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains antioxidant additives. Applications: Blends with HDPE, Industrial Sacks, Blends with LDPE, Stretch Films, Flexible Packaging (Tubular Films), Liners, General use packing, Blends for irrigation pipes Process: Blown Film Extrusion

LH218 is a LLDPE, hexane comonomer, that shows a good balance between optical properties, mechanical properties, sealability and processability, with very low gel contained. Applications: Stretch Films, Blends with LDPE, Blends with HDPE, General use packing Process: Blown Film Extrusion, Cast Film Extrusion

LH537 is a LLDPE that offers an excellent processability, stiffness and soft touch for flat die films. Very low gel contents. Application: Hygienic absorbent, Diapers

LHB118/21 AF is a LLDPE copolymer produced by Braskem. It is a ready-to-use product since it contains 10% LDPE. Its additive package was optimized to avoid blocking, even at low thickness. Film obtained from this grade show very good mechanical properties and a good balance between sealability and processability. Very low gel amount. Additive: Processing Aid Medium, Antioxidants Medium, Slip Medium, Antiblocking High

LL118/21 is a LLDPE produced by Braskem. It is a general purpose product that shows a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. Additive: Antiblocking Medium, Slip Medium

Applications: Tamper evident caps, Large caps, Bungs, Houseware, Masterbatches Processes: Injection Molding, Extrusion

Braskem LL318 resin is a Linear Low Density Polyethylene developed to the cast film extrusion with a good relation between optical properties, mechanical properties and processability, besides it have an extremely low gel contain. Applications: Stretch films Processes: Cast film extrusion

LL4400SFC is a Linear Low Density Polyethylene that shows specific quality controls for monosil and other Wire and Cable applications. This product contains an oxidant additives and low gel content. Applications: Insulation and cable cover, Low voltage XLPE insulation, Medium voltage XLPE insulation, Monosil system Process: Wire and Cable Extrusion

LL4405S is a Linear Low Density Polyethylene developed for cast film extrusion. Films obtained with this product show a good processing performance balanced with good mechanical properties and processability. Very low gel amount. Additive: Antiblocking - High Slip - High Applications: Low thickness film, Bags, Blends with HDPE, Blends with LDPE

LL5400S is a Linear Low Density Polyethylene developed for blown film extrusion in blends with polyethylenes. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains antioxidant additives. Applications: Blends for irrigation pipes, Blends with HDPE, Blends with LDPE, Flexible Packaging (Tubular films), General use packing, Industrial Sacks, Liners Processes: Blown Film Extrusion

LL5405S is a Linear Low Density Polyethylene (LLDPE) developed for blown film extrusion. Films obtained with this product show a good processing performance balanced with good mechanical properties as well as processability. Very low gel amount. Additives: Antiblocking, Slip Applications: Film, Blends with HDPE, Bags

M2520 is a linear low density polyethylene, produced with metallocene catalyst. It presents excellent processability and mechanical propriety balance. Applications: Houseware, Parts with high mechanical resistance, Masterbatches, Caps Processes: Injection Molding, Extrusion (when used as masterbatch)

ML2400N is a linear low density polyethylene with narrow molecular weight distribution. It presents good flexibility and low warpage. Applications: Caps, Houseware, Large flat injection molded articles, Masterbatches Processing Conditions: Extrusion, Injection Molding

The resin ML3400N is a Linear Low Density Polyethylene developed for rotational molding. Technical Characteristics: Good surface finishing Excellent processability Low warpage UV and heat stabilization Additives: Weathering resistance UV8 and antioxidants Applications: Kayak, Toys, General use articles, Automotive article, Agricultural article Processes: Rotational Molding

The resin ML3601U is a Linear Low Density Polyethylene indicated for rotational molding. Technical Characteristics: Good surface finishing Excellent impact resistance Creep Resistance UV and heat stabilization Additives: Weathering resistance UV14 and antioxidants. Applications: Large tanks for water storage, Septic tanks, Storage tanks for chemical and agricultural products, Water tanks

The resin ML3602U is a Linear Low Density Polyethylene indicated for rotational molding. Technical Characteristics: Good surface finishing Excellent processability Standard color for natural parts Excellent balance between stiffness and impact resistance UV and heat stabilization Additives: Weathering resistance UV8 and antioxidants. Applications: Parts with high mechanical resistance, Technical parts

ML440ON is a LLDPE resin butene comonomer especially developed for the rotational molding process in the application of water tank up to 2000L (inclusive). Technical Characteristics: - Good surface finishing - High stiffness - Excellent processability - UV radiation and heat stabilization - Indicated for use on colored pieces Additives: - Weathering resistance UV8 and antioxidants Applications: - Water tanks, General use articles

PB208 is a low density polyethylene with no additives. This grade shows excellent processability being indicated for low viscosity required applications. Injection molded products with this resin show high flexibility. Applications: Bungs, Caps, Flexible injection molded articles, Masterbatches Process: Extrusion, Injection Molding

PB608 is a resin with excellent processability, indicated for low viscosity applications. Injection molded parts with this resin present high flexibility. Applications: Bungs, Caps, Flexible injection molded articles, Masterbatches Process: Extrusion, Injection Molding

PB681/59 is a grade produced under high pressure in a tubular reactor. This resin is used for laminating films mainly on paper substrate. It is also used in the extrusion coating process. Films obtained with this product show excellent optical properties and high draw down ability. Additive: Antiblock, Slip. Applications: Laminates, Automatic packaging for solid products Process: Blown Film Extrusion

The PB681 is a resin produced under high pressure, in tubular reactor. This resin presents excellent 'draw down'(stability to form fine films). The films produced with this resin present excellent optical properties. Applications: Blends with LLDPE, Blends with HDPE Process: Cast film extrusion, Blown Film Extrusion, Injection Molding

PLURIS9300 is a Quateropolymer unique properties, such as high stiffness associated with toughness. It is easier to process than conventional LLDPE with the same melt index and shows very good bubble stability. Films obtained with this product have very low gel values. It contains processing Aid, antioxidant and antiblock additives. Applications: Blends with HDPE, Blends with LDPE, General use packing, Industrial Sacks, Liners Process: Blown Film Extrusion.

Braskem PROXESS2606 is a linear low density polyethylene (LLDPE) produced through metallocene catalyst and recommended to blown film extrusion. Films obtained with this grade exhibits high mechanical strength, better sealing, high transparency and comparable contraction levels. These properties make this product a versatile option for both monolayer and multilayer films. Additives: Antioxidants, Processing Aid Applications: Ice bag, Industrial Sacks, Mortar bag, Sandbag, Shrink film Process: Blown Films Extrusion

PROXESS3310 is a copolymer produced with metallocene catalyst with excellent processability, besides rigidity combined with good mechanical properties. Applications: Technical films, Coextrusion, Films for lamination, General use films Processes: Single Layer Tubular Film Extrusion and Coextrusion

PROXESS1509XP is a copolymer produced with a metallocene catalyst that exhibits excellent processability and has a special additive package that gives greater stability to COF after lamination. Additives: Antioxidant, Slip Agent, Antiblocking, Polymer Processing Aid Applications: Technical Films for Lamination, Technical films for automatic packaging, Coextrusion, Packing for liquid products Process: Blown Films Extrusion

Braskem PROXESS1809 is a copolymer produced through metallocene catalyst that shows excellent processability for blown and cast film extrusion. Applications: Coextrusion, General use films, High performance films, Stretch Films, Technical films for automatic packaging, Technical Films for Lamination Process: Blown Films Extrusion, Cast film extrusion

High density polyethylene RGR 7A2 WE obtained by reverse logistics of post-consumer recycled polymer. The grade RGR 7A2 WE contains 70% of PCR and 30% of sustainable I'm Green resin, available in white colour (Carbon Neutral). Application: Blow molding Processes: Extrusion Blow Molding

RIGEO 4950HS is a high density polyethylene, copolymer, developed for blow molding application with excellent impact strength and stiffness. It exhibits excellent stress cracking resistance being suitable for contact with surfactant substances and chemical products. Application: Packages up to 20 liters for chemicals, domestic and industrial Processes: Extrusion Blow Molding

RIGEO 4950HSM is a high density polyethylene, copolymer, developed for blow molding application with excellent impact strength and stiffness. It exhibits excellent stress cracking resistance being suitable for contact with surfactant substances and chemical products. Application: Packages up to 20 liters for chemicals, domestic and industrial Processes: Extrusion Blow Molding

RIGEO HD1053H is a high density polyethylene, copolymer, developed for blow molding application with excellent impact strength and stiffness. It exhibits excellent stress cracking resistance being suitable for contact with surfactant substances and chemical products. Application: Packages up to 60 liters for chemicals, domestic and industrial Processes: Extrusion Blow Molding

RIGEO HD1053M is a high density polyethylene, copolymer, developed for blow molding application with excellent impact strength and stiffness. It exhibits excellent stress cracking resistance being suitable for contact with surfactant substances and chemicals. Application: Packages up to 60 liters for domestic, chemical and industrial products Processes: Extrusion Blow Molding

RIGEO HD1954M is a high density polyethylene, copolymer, developed for the blow molding process, presenting high impact resistence and rigidity. Rigeo HD1954M presents excelent stress cracking resistence, being suitable for aplications involving contact with chemichal compounds and surfactants. Applications: Packages up to 20 liters for chemicals, domestic and industrial Processes: Extrusion Blow Molding

The linear low-density polyethylene RPL 0C1 WE is obtained from reverse logistics of industrial bags and it has a concentration of 100% recycled material. This product color is transparent. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

The linar low-density polyethylene RPL 0C1 WE is obtained from reverse logistics of industrial bags and it has a concentration of 100% recycled material. This product color is white. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

The linear low-density polyethylene RPL 4C2 BL is obtained from reverse logistic of industrial bags and it has a concentration of 55% recycled material. This product color is translucent blue. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use