BYNEL™ Series 2000 resins are acid modified ethylene acrylate resins. They contain a temperature stable ester which makes them functional in high temperature coextrusions. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. Applications - BYNEL™ 2000 series resins adhere to a wide variety of materials. They are most often used to adhere to PE, EVA, Polyamide, ionomer, paper, aluminum foil, and printed films. - BYNEL™ 2002 is designed for low melt temperature extrusion or coextrusion coating / laminating applications.

BYNEL™ Series 2000 resins are acid modified ethylene acrylate resins. They contain a temperature stable ester which makes them functional in high temperature coextrusions. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. Applications - BYNEL™ 2000 series resins adhere to a wide variety of materials. They are most often used to adhere to PE, EVA, Polyamide, ionomer, paper, aluminum foil, and printed films. - BYNEL™ 2002 is designed for low melt temperature extrusion or coextrusion coating / laminating applications.

Features - E-FLEX I3265 is a family of ethylene acrylic acid (E/AA) copolymers, in which part of the acrylic acid is neutralized with Zn/Na ions Application - Golf ball cover consumer products Drying - Product is dried and packed with a moisture content of <0.08%. Should the packaging become damaged or be left open too long, then the material must be dried.A too high moisture content can lead to a reduction of optical and mechanical properties.

Exxtra™ Adhere EAA14009 resin is primarily intended for high speed, low coating weight extrusion coating and extrusion lamination. Exxtra™ Adhere EAA14009 resin offers the following advantages: excellent adhesion to polar substrates,aluminum foil, polyamide films, metallized films, papers, iron, steel, and glass; high bond resistance when used to pack acidic food products; very low sealing and hot tack initiation temperature; very high hot tack peak force.

Exxtra™ Adhere EAA14011 resin is primarily intended for high speed, low coating weight extrusion coating and extrusion lamination. Exxtra™ Adhere EAA14011 resin offers the following advantages: excellent adhesion to polar substrates,aluminum foil, polyamide films, metallized films, papers, iron, steel, and glass; high bond resistance when used to pack acidic food products; very low sealing and hot tack initiation temperature; very high hot tack peak force.

Exxtra™ Adhere EAA30010 resin is an ethylene acrylic acid copolymer characterized by high melt index and 10 wt% acrylic acid comonomer content. Exxtra™ Adhere EAA30010 resin easily combines processing and adhesion to polar materials. It canbe formulated and UV-stabilized for use in outdoor applications.

Exxtra™ Adhere EAA38015 resin is an ethylene acrylic acid copolymer with a high comonomer content. Exxtra™ Adhere EAA38015 resin can be used pure or as a component in blend formulations for bonding applications where medium viscosity and very good adhesion to polar materials are required.

Exxtra™ Adhere EAA8206 resin is primarily intended for extrusion coating, coextrusion coating, and extrusion lamination. It has very good adhesionto polar substrates, aluminum foil, metallized films, papers, iron, steel, and glass. It offers excellent balance of adhesion onto substrates and interlayer adhesion with coextruded LDPE and EVA material.

Exxtra™ Adhere EAA8206HS resin is primarily intended for extrusion coating and coextrusion coating. It is the high draw down version of Exxtra™ Adhere EAA8206 resin. It offers the following advantages: very low coating weight achievable at high line speed; very good adhesion to polar substrates, aluminum foil, metallized films, paper, iron, steel, and glass; and excellent balance of adhesion onto the substrates and interlayer adhesion with coextruded LDPE and EVA material.

Exxtra™ Adhere EAA8308 resin is primarily intended for extrusion coating and coextrusion coating. It has very good adhesion to polar substrates, aluminum foil, metallized films, paper, iron, steel, and glass. It offers excellent balance of adhesion onto substrates and interlayer adhesion with coextruded LDPE and EVA material.

Exxtra™ Adhere EAA8409 resin is primarily intended for extrusion coating, coextrusion coating, and extrusion lamination. It has very good adhesionto polar substrates, aluminum foil, metallized films, paper, iron, steel, and glass. It offers excellent balance of adhesion onto substrates and interlayer adhesion with coextruded LDPE and EVA material.

Exxtra™ Adhere EAA8511 resin is primarily intended for extrusion coating, coextrusion coating, and extrusion lamination. Exxtra™ Adhere EAA8511 resin offers the following advantages: excellent adhesion to polar substrates, aluminum foil, metallized films, paper, iron, steel, and glass; high bond resistance when used to pack acidic food products; excellent coextrusion adhesive resin for polyamides; outstanding sealing performance; very low temperature sealing with high strength; and high hot tack forces and good seal through contamination.

This data represents typical values that have been calculated from all products classified as: Generic EAA This information is provided for comparative purposes only.

IONIA™ 1210 Ionomer is an ethylene acrylic acid based ionomer, designed for blown and cast film for flexible packaging applications. IONIA™ 1210 provides excellent sealability and optimized surface properties in coextrusion film structures. Ion Type: - Sodium Ionomer Complies with: - US FDA 21 CFR - EU 10/2011

IONIA™ 2610 Ionomer is an ethylene acrylic acid based ionomer, designed for cast, extrusion coating and blown film applications. Ion Type: - Zinc Ionomer Complies with: - US FDA 21 CFR - EU 10/2011

SK IONIA 2750 Ethylene Acrylic Acid Ionomer is designed for extrusion coating, blown film, and cast film for flexible packaging applications. It provides excellent sealability in coextrusions with Nylon and other film structures. Ion Type: - Zinc Ionomer

NUCREL™ 30707 is a copolymer of ethylene and acrylic acid, made with nominally 6.9 wt% acrylic acid. The resin is available for use in blown/cast film and extrusion coating operations. It can be used on both extrusion and coextrusion equipment designed to process polyethylene resins. Uses - Adhesives; Packaging; Sealants Composition - 6.9% By Weight Acrylic Acid comonomer content

NUCREL™ 30907 is an ethylene acid copolymer resin. The resin is available for use in conventional extrusion coating, extrusion coating, and extrusion laminating equipment designed to process polyethylene resin. This resin may also be used in conventional blown and cast film extrusion and coextrusion equipment Composition - 9.5% By Weight Acrylic Acid comonomer content

NUCREL™ 31001 is a copolymer of ethylene and acrylic acid, made with nominally 9.5 wt% acrylic acid. It is available for use in blown and cast film extrusion and coextrusion equipment. Uses - Adhesives; Packaging; Sealants Composition - 9.5% By Weight Acrylic Acid comonomer content

NUCREL™ 3990 is a copolumer of ethylene and acrylic acid. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment. Composition - 9.5% By Weight Acrylic Acid comonomer content

NUCREL™ 3990L is a copolymer of ethylene and acrylic acid. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment. Composition - 9.5% By Weight Acrylic Acid comonomer content Characteristics/Benefits - This is a version of NUCREL™ 3990 that has been further devolatilized for very sensitive applications

PRIMACOR™ 1321 Copolymer is an ethylene acrylic acid copolymer suitable for extruded blown and cast film. PRIMACOR™ 1321 Copolymer has been specifically designed for use as an adhesive layer in composite films or sealant layer in flexible packaging structures. PRIMACOR™ 1321 Copolymer exhibits: - Good interlayer adhesion to PE and PA - Good optical properties - Excellent toughness and strength - Excellent environmental stress crack and product resistance - Good hot-tack and sealability - Insensitivity to moisture Applications: - Multilayer films - Food packaging Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 1410 Copolymer is an ethylene acrylic acid copolymer suitable for monolayer or coextrusion blown films. PRIMACOR 1410 Copolymer has been specifically designed for use as a heat seal or adhesive layer in composite films. PRIMACOR 1410 Copolymer exhibits: - Excellent hot tack and sealability - Excellent toughness and strength - Excellent crack resistance - Insensitivity to moisture - Good optical properties Applications: - Speciality and skin packaging - Multilayer films Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 1430 Copolymer is an ethylene acrylic acid copolymer that provides good sealability, hot tack and excellent adhesion to polar (foil, nylon, etc.) materials. It also provides excellent toughness, clarity and tear resistance. PRIMACOR™ 1430 Copolymer exhibits: - Adhesive layer of sealant layer in flexible packaging structures - For blown or cast film extrusion - Used where adhesion to nylon or foil is desired Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3002 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion coating and extrusion lamination. PRIMACOR 3002 Copolymer exhibits: - Excellent draw-down and edge stability - Excellent organoleptic properties - Excellent toughness and strength - Outstanding environmental stress crack and product resistance - Excellent hot-tack and sealability - Adhesion to paper, paperboard, metals and polyethylenes - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3003 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion coating and extrusion lamination. PRIMACOR 3003 Copolymer exhibits: - Excellent draw-down and edge stability - Excellent organoleptic properties - Excellent toughness and strength - Outstanding environmental stress crack and product resistance - Excellent hot-tack and sealability - Adhesion to paper, paperboard, metals and polyethylenes - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3004 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3004 Copolymer exhibits: - Excellent draw-down and edge stability - Adhesion to paper, paperboard, metals and polyethylenes - High performance sealant or tie layer - Excellent hot-tack and sealability - Excellent seal through contamination - Excellent product resistance - Excellent toughness and strength - Outstanding environmental stress crack and product resistance Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3150 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3150 Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Good heat sealability - Good draw-down - Excellent oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Cost effective sealant or tie resin for foil-based structures Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3330 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3330 Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Excellent hot-tack and sealability - Excellent toughness - Excellent oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Plastic tube laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3330A Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3330A Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Excellent hot-tack and sealability - Excellent toughness - Excellent oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Plastic tube laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives - Antiblock: No - Slip: No

PRIMACOR™ 3340 Copolymer is an ethylene acrylic acid copolymer which has been specifically designed by SK for use as an adhesive or sealant layer in extrusion/coextrusion coating and lamination. PRIMACOR™ 3340 Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Excellent hot-tack and sealability - Good oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3440 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR™ 3440 Copolymer exhibits: - Excellent adhesion to paper, paperboard, metals and polyethylenes - Excellent hot-tack and sealability - Excellent toughness - Excellent stress crack resistance - Insensitivity to moisture - Designed specifically for high line speeds Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3460 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR™ 3460 Copolymer has been specifically designed for use as a sealant and adhesive layer in flexible packaging laminates and thin paper coating. PRIMACOR™ 3460 Copolymer exhibits: - Excellent heat sealability and hot tack - Excellent adhesion to metallic, paper and polyethylene substrates - Good stress crack resistance - Designed specifically for high line speeds and low processing temperature - Insensitive to moisture Applications: - Flexible packaging - Thin paper coating - Metallic substrate lamination Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 3540 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR™ 3540 Copolymer exhibits: - Extrusion coating adhesive polymer - Enhanced adhesion retention Complies with: - US. FDA 21 CFR 177.1310(b) - EU. No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 4608 Copolymer is an ethylene acrylic acid copolymer suitable for extrusion coating and extrusion lamination applications. PRIMACOR™ 4608 Copolymer has been specifically designed for use as a sealant and adhesive layer for flexible packaging and liquid packaging laminates. PRIMACOR™ 4608 Copolymer exhibits: - Excellent heat sealability and hot tack - Excellent adhesion to metallic, paper and polyethylene substrates - Excellent draw down - Good oil and grease resistance - Insensitivity to moisture Applications: - Flexible packaging laminates - Liquid packaging board laminates Complies with: - U.S. FDA 21 CFR 177.1310(a)(1) - EU, No 10/2011 Additives: - Antiblock: No - Slip: No

PRIMACOR™ 4810 is an ethylene acrylic acid copolymer adhesive designed for use with metallic, cellulosic, glass and other substrates. In dispersion form, it is a binder for nonwoven fibers, including polypropylene, polyester, glass, nylon, and others.

PRIMACOR™ 5980I Copolymer is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other substrates. In dispersion form, it can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates. PRIMACOR™ 5980I Copolymer exhibits: - Dispersible in aqueous amines and alkali - “Clean” dispersion requires no salts, surfactants or solvents - Dispersions use existing waterbourne application equipment - Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent grease and oil resistance, water hold-out and excellent product resistance for flexible packaging applications - Low odor Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Nonwoven binding - Metal/paper coating Complies with: - US. FDA 21 CFR 177.1310(a)(2) Additives: - Antiblock: No - Slip: No

PRIMACOR™ 5985 dispersible polymer is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other polar substrates. In dispersion form, it can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates. PRIMACOR™ 5985 Copolymer exhibits: - Dispersible in aqueous amines and alkali - “Clean” dispersion requires no salts, surfactants or solvents - Dispersions use existing waterbourne application equipment - Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent grease and oil resistance, water hold-out, and excellent product resistance for flexible packaging applications - Low odor Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Nonwoven binding - Metal/paper coating Complies with: - US. FDA 21 CFR 177.1310(a)(2) Additives: - Antiblock: No - Slip: No

PRIMACOR™ 5986 Copolymer is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other substrates. It can be used effectively as a foil primer or laminating adhesive for polyethylene and metallized substrates. PRIMACOR™ 5986 Copolymer exhibits - Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent grease and oil resistance and excellent product resistance for flexible packaging applications Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Metal/paper coating Complies with: - US. FDA 21 CFR 177.1 310(a)(2) Additives: - Antiblock: No - Slip: No

PRIMACOR™ 5990I Copolymer is an ethylene acrylic acid copolymer with excellent adhesion to metallic, cellulosic, glass and other substrates. In dispersion form, it is a versatile binder for nonwoven fibers, including polypropylene, polyester, glass, nylon and others. PRIMACOR™ 5990I Copolymer exhibits - Dispersible in aqueous amines and alkali - Clean dispersion requires no salts, surfactants or solvents - Dispersion s use existing waterbourne application equipment - Low heat seal temperature, high hot tack - High gloss, excellent clarity - Excellent water, grease and oil resistance - Low odor Applications: - Adhesives - Laminations - Foil priming - Heat sealing - Nonwoven binding - Metal/paper coating Complies with: - US. FDA 21 CFR 177.1 310(a)(2) Additives: - Antiblock: No - Slip: No