4KFLEX SBS 70 Shore A black

FEATURES: A SBS Based Thermoplastic rubber compound natural in color for all extrusion applications featuring good chemical resistance and toughness

Injection & extrusion molding grade. For molded products with superior rigidity, and good surface appearance. It is supplied in pellet form. Containers, stationery goods, toys, and consumer goods.

Injection molding grade. For molded products with superior balance of high-level impact strength and rigidity, maximum transparency, and good surface appearance. It is supplied in pellet form. Food containers, cosmetics caps, pencil cases and other stationery goods, toys, swim goggle and other cases, consumer goods

Film and sheet grade. Styrenic resins modifier, for high impact strength. Small-quantity addition to GPPS (general-purpose polystyrene) for sheets with good hinge characteristics and films with good elongation characteristics. Inflation and sheet extrusion capability. It is supplied in pellet form. Blended with GPPS for PSP* laminated, blister packs, and other films. Also as modifier to heighten deep-drawing performance, for frozen dessert cups and lids, and transparent cold-drink cups.

Sheet grade. Blended with SC*, for highly transparent sheets. It is supplied in pellet form. Blended with SC* for transparent blister packs and other sheets, with GPPS for frozen dessert cups and other containers, and with GPPS/Tufprene™ to obtain PS sheets for food containers and other applications. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 815 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).

Injection- and blow-molding grade. For transparent products with superior impact strength. Blended with GPPS (general-purpose polystyrene) or SC*, for films with good thermal stability. Capability for profile-extrusion products. It is supplied in pellet form. Cosmetics caps, stationery goods, other consumer goods. Blended with GPPS for PSP* laminate films and IC magazine rails, and with SC* for shrink films. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 825 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS.

Film and sheet extrusion grade. Blended with SC*, for films with good balance of performance characteristics. Capability for inflation and sheet extrusion. It is supplied in pellet form. In blends with GPPS, for IC carrier tapes. In blends with SC, for shrink films. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 830 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).

Sheet extrusion grade. Blended with SC*, for sheets with high transparency and high impact resistance. It is supplied in pellet form. In blends with GPPS, for dessert cups. In blends with SC, for blister packs and shrink films with high transparency and high impact strength. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 835 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).

Injection molding, inflation molding, and sheet extrusion grade. Blended with GPPS (general-purpose polystyrene) or SC*, for products with well-balanced performance characteristics and good thermal characteristics. It is supplied in pellet form. In blends with GPPS, for PSP* laminate films. In blends with SC, for shrink films and other products. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 840 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS .

Sheet extrusion grade. Highly compatible with GPPS (general-purpose polystyrene), for sheets with superior balance of transparency and impact resistance. Superior processability, enabling production of deep-draw containers and other products. It is supplied in pellet form. In blends with GPPS, sheets for drink cups and food containers, and IC magazine rails. Used alone for gardening ampoules and other products.

High molecular weight, for enhanced adhesive characteristics in pressure-sensitive and other adhesives and heightened softening point in asphalts. It is supplied in crumb or powder form.

Low solution viscosity designed for pressure-sensitive and other adhesives modification. High level of processability in asphalt modification. It is supplied in crumb or powder form.

Specifically developed for superior characteristics and performance in asphalt blends. It is supplied in crumb form.

Specifically developed for superior characteristics and performance in pressure-sensitive and other adhesives, marked by good processability through low viscosity and a high level of balanced characteristics. It is supplied in pellet form.

Specifically developed for superior characteristics and performance in pressure-sensitive and other adhesives, marked by good processability through low viscosity and a high level of balanced characteristics. It is supplied in pellet form.

An SBS compound that can be direct injection molded to canvas without priming or adhesives.

BTR620A, which includes the compounds of SBS resin with bamboo fiber, maintains the antibiosis and deodorization features of bamboo.This products have been successfully applied in handle coating and it also can be applied in shoes material and toys, like bassinet wheel, cushion and ects....

BTR630A, which includes the compounds of SBS resin with bamboo fiber, maintains the antibiosis and deodorization features of bamboo.This products have been successfully applied in handle coating and it also can be applied in shoes material and toys, like bassinet wheel, cushion and ects....

Calprene 401 is an 80/20 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a radial structure. This product is available in: - Calprene 401, porous crumb. APPLICATIONS: - Adhesives. - Flexographic plates - Bitumen modification. - Plastic modification. - Technical compounds. - Footwear.

Calprene 411 is a 70/30 Butadiene/Styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in: C 411 porous crumb C 411C porous pellet C 411M powder form dusted with amorphous silica APPLICATIONS: - Bitumen modification. - Plastic modification. - Technical compounds. - Footwear. - Adhesives and Sealants.

Calprene 411L is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in porous crumb and the typical bulk density value for this product is 280 g/l. APPLICATIONS: - Bitumen modification.

Calprene 412 is a 69/31 Butadiene/Styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in: C 412 porous pellet C 412M powder form dusted with amorphous silica APPLICATIONS: - Bitumen modification

Calprene 413 is a 68.5/31.5 butadiene/styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in porous crumb. APPLICATIONS: - Bitumen modification

Calprene 419 is a 70/30 Butadiene/Styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in: Calprene 419, porous crumb Calprene 419M, powder form dusted with amorphous silica APPLICATIONS: - Bitumen modification - Footwear - Adhesives - Plastic modification - Technical compounds

Calprene 420CX is a styrene/butadiene copolymer synthetized by solution polymerization. It has a butadiene/styrene monomer composition of 63/37 by weight percentage and a radial structure. With this new Calprene 420CX, Dynasol broadens the recommended SBS grades in bitumen modification applications. This product is available in porous pellets. APPLICATIONS: - Asphalt/Bitumen modification.

Calprene 480BX is a styrene/butadiene copoly-mer synthetized by solution polymerization. It has a butadiene/styrene monomer composition of 66/34 by weight percentage and a radial structure. The butadiene part has high vinyl con-tent. With this new Calprene 480BX, Dynasol broad-ens the recommended SBS grades in bitumen modification applications. Due to its special structure, Calprene 480BX presents the following advantages: - Higher compatibility with the bitumen. - Quicker solution time in bitumen. - Lower viscosity in the final PmB mixture. - Better thermal stability in the final PmB. This product is available in porous pellets. APPLICATIONS: - Adhesives. - Asphalt/Bitumen modification.

Calprene 500 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is stabilized with a non-staining antioxidant system. Calprene 500 offers good mechanical prop-erties and shows a very good yellow index behavior. Calprene 500 is supplied in porous pellets. APPLICATIONS: - Adhesives (hot melt). - Asphalt modification. - Polymer modification. - Compounding. - Footwear. - Flexography.

Calprene 501 is a 69/31 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is available in: C 501, porous crumb C 501C, porous pellet C 501M, powder form dusted with amorphous silica APPLICATIONS: - Adhesives. - Flexographic plates. - Bitumen modification. - Plastic modification. - Technical compounds. - Footwear.

The Calprene 5375X is a 63/37 butadiene/ styrene copolymer, polymerized in solution and having a combination of thermoplastic/ thermoset segments. This product has improved dispersion in bitumen, excellent PmB properties and low viscosity. It also allows workable mixes even at high polymer loadings. APPLICATIONS: - Adhesives. - Bitumen modification.

Calprene 540 is a 60/40 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is presented in porous pellets and has excellent optical properties due to its clarity. It is stabilized with a non staining antioxidant system and is essentially gel free with a very clear color. APPLICATIONS: - Adhesives and Sealants. - Plastic modification. - Technical compounds. - Footwear.

Calprene 540H is a 60/40 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is presented in porous pellets and has excellent optical properties due to its clarity. It is essentially gel free with a very clear color. Calprene 540H is stabilized with a non-staining antioxidant system that includes Irganox 1076 (CAS number: 2082-79-3) and Irgafox 168 (CAS number 31570-04-4). APPLICATIONS: - Adhesives and Sealants. - Plastic modification. - Technical compounds. - Footwear.

Calprene 580B is a styrene/butadiene copolymer synthetized by solution polymerization. It has a butadiene/styrene monomer composition of 68.5/31.5 by weight percentage and a linear structure. The butadiene part has high vinyl content. With this new Calprene 580B, Dynasol broadens the recommended SBS grades in bitumen modification applications. Due to its special structure, Calprene 580B presents the following advantages: - Higher compatibility with the bitumen. - Quicker solution time in bitumen. - Lower viscosity in the final PmB mix-ture. - Better thermal stability in the final PmB. This product is available in: - Calprene 580B, porous pellets. - Calprene 580BM, powder form dusted with amorphous silica. APPLICATIONS: - Adhesives. - Asphalt/Bitumen modification.

Calprene 700 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is stabilized with a non-staining antioxidant system. It is a BHT free SBS. Calprene 700 offers good mechanical prop-erties and shows a very good yellow index behavior. Calprene 700 is supplied in porous pellets. APPLICATIONS: - Adhesives (hot melt). - Polymer modification. - Compounding. - Footwear. - Flexography.

Calprene 701 is a new 69/31 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a linear structure. This product is stabilized with a non-staining antioxidant system. Calprene 701 offers good mechanical and op-tical properties. Calprene 701 is supplied in porous crumb. APPLICATIONS: - Adhesives. - Flexographic plates. - Plastic modification. - Technical compounds. - Footwear. - Asphalt modification.

Calprene 710 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is stabilized with a non-staining antioxidant system, essentially gel free and very transparent. Calprene 710 is a BHT and nonylphenol free SBS. This product is available in: - Calprene 710, porous pellets. - Calprene 710M, powder form dusted with amorphous silica. APPLICATIONS: - Adhesives (hot melt). - Asphalt modification. - Polymer modification. - Technical compounding. - Footwear.

Calprene 711 is a new 70/30 butadiene/sty-rene Thermoplastic copolymer, polymerized in solution and having a radial structure. This product is stabilized with a non-staining antioxidant system. Calprene 711 is supplied in porous crumb. APPLICATIONS: - Adhesives and sealants. - Plastic modification. - Technical compounds.