MOISTURE CROSSLINKABLE MULTI-COMPONENT SYSTEM BASED ON GRAFTED XLPO POLYMER FOR LOW VOLTAGE WIRE APPLICATIONS (RoHS COMPLIANT) DESCRIPTION AquaGraft® 1-6010 is a moisture crosslinkable, natural, XLPO grafted polymer system that is composed of PEMC-1 grafted base polymer and FMB 6010 FR/catalyst master batch. These two components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft® 1-6010 will cure with exposure to moisture at ambient temperature over time (depending on cable construction and environmental conditions). AquaGraft® 1-6010 can also be cured at improved rates if exposed to sauna or hot water after extrusion. APPLICATIONS AquaGraft® 1-6010 is designed for use in various low voltage applications including building wire, control cables, submersible pump cables, and other specifications requiring superior thermal, mechanical, and electrical properties. This two-component system, when blended in an 80% PEMC-1: 20% FMB 6010 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame tests and perform well for UL-44 building wire applications. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with AquaGraft® 1-6010 will comply with the requirements as specified in the following standards: UL 44 XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, and SIS CSA 22.2 No. 38-05 for RW-75, RWU-75, R-90, RW-90 FT-2 Flame, UL Horizontal Flame

150°C RATED MOISTURE CROSS LINKABLE XLPO SYSTEM CONSISTING OF GRAFTED XLPO BASE AND FLAME RETARDANT CATALYST MASTER BATCH (RoHS COMPLIANT) DESCRIPTION AquaGraft 1-5150 is a moisture crosslinkable, natural, XLPO grafted polymer system that is composed of PEMC-1 and FMB-5150 FR/catalyst master batch. These two components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft 1-5150 will cure with exposure to moisture at ambient temperature with time (depending on cable construction and environmental conditions). AquaGraft 1-5150 can also be cured at accelerated rates by exposure to sauna or hot water after extrusion. APPLICATIONS AquaGraft 1-5150 is designed for use in UL/CSA 150°C rated AWM cable applications. These two components, when blended in a 70% PEMC-1/30% FMB-5150 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized requirements and be suitable for flame retardant 150oC applications. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct component ratios will comply with the requirements as specified in the following standards: UL 150 C Styles 3321 CSA CL-1503 Class 1, Group A/B single conductor 600v XLPE FT-2 Flame Rating, UL Horizontal Flame

MOISTURE CROSSLINKABLE MULTI-COMPONENT SYSTEM BASED ON GRAFTED XLPO POLYMER FOR LOW VOLTAGE WIRE APPLICATIONS (RoHS COMPLIANT) DESCRIPTION AquaGraft® 16-6010 is a moisture crosslinkable, natural, XLPO grafted polymer system that is composed of EPMC-16 grafted base polymer and FMB 6010 FR/catalyst master batch. These two components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft® 16-6010 will cure with exposure to moisture at ambient temperature over time (depending on cable construction and environmental conditions). AquaGraft® 16-6010 can also be cured at improved rates if exposed to sauna or hot water after extrusion. APPLICATIONS AquaGraft® 16-6010 is designed for use in various low voltage applications including building wire, control cables, submersible pump cables, and other specifications requiring superior thermal, mechanical, and electrical properties. This two-component system, when blended in an 80% EPMC-16: 20% FMB 6010 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame tests and perform well for UL-44 building wire applications. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with AquaGraft® 16-6010 will comply with the requirements as specified in the following standards: UL 44 RHH, RHW, RHW-2, and SIS CSA 22.2 No. 38-05 for RW-75, RWU-75, R-90, RW-90 FT-2 Flame, UL Horizontal Flame

MOISTURE CROSSLINKABLE MULTI-COMPONENT SYSTEM BASED ON GRAFTED XLPO POLYMER FOR LOW VOLTAGE WIRE APPLICATIONS (RoHS COMPLIANT) DESCRIPTION AquaGraft 16-100 is a moisture crosslinkable, natural, XLPO grafted polymer system that is composed of EPMC 16 grafted base polymer, CMB 432 catalyst master batch and FMB 5008 FR/catalyst master batch. These three components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft 16-100 will cure with exposure to moisture at ambient temperature over time (depending on cable construction and environmental conditions). AquaGraft 16-100 can also be cured at improved rates if exposed to sauna or hot water after extrusion. APPLICATIONS AquaGraft 16-100 is designed for use in various low voltage applications including building wire, control cables, submersible pump cables, and other specifications requiring superior thermal, mechanical, and electrical properties. This three component system, when blended in a 68/2/30 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame tests and perform well for UL-44 building wire applications. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with AquaGraft 16-100 will comply with the requirements as specified in the following standards: UL 44 XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, and SIS CSA 22.2 No. 38-05 for RW-75, RWU-75, R-90, RW-90 FT-2 Flame, UL Horizontal Flame

150° C RATED FLEXIBLE MOISTURE CROSS LINKABLE XLPO SYSTEM CONSISTING OF GRAFTED ELASTOMERIC XLPO BASE AND FLAME RETARDANT CATALYST MASTER BATCH (RoHS COMPLIANT) ESCRIPTION AquaGraft 16-5150 is a flexible moisture crosslinkable, natural, XLPO grafted polymer system that is composed of EPMC-16 and FMB-5150 FR/catalyst master batch. These two components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft 16-5150 will cure with exposure to moisture at ambient temperature with time (depending on cable construction and environmental conditions). AquaGraft 16-5150 can also be cured at accelerated rates by exposure to sauna or hot water after extrusion. APPLICATIONS AquaGraft 16-5150 is designed for use in UL/CSA 150°C rated AWM cable applications. These two components, when blended in a 70% EPMC-16/30% FMB-5150 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized requirements and be suitable for flame retardant 150oC applications. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct component ratios will comply with the requirements as specified in the following standards: UL 150 C Styles 3321 CSA CL-1503 Class 1, Group A/B single conductor 600v XLPE FT-2 Flame Rating, UL Horizontal Flame SAE J1127

125°C RATED, HIGHLY FLEXIBLE MOISTURE CROSS LINKABLE EPR SYSTEM CONSISTING OF GRAFTED ELASTOMERIC EPR BASE AND FLAME RETARDANT CATALYST MASTER BATCH (RoHS COMPLIANT) DESCRIPTION AquaGraft® 2-5150 is a highly flexible moisture crosslinkable, natural, EPR based grafted polymer system that is composed of EPMC-2 and FMB-5150 FR/catalyst master batch. These two components are supplied in pellet form, and when blended in the proper ratios, will meet various low voltage and specialty wire and cable requirements. AquaGraft® 2-5150 will cure with exposure to moisture at ambient temperature with time (depending on cable construction and environmental conditions). AquaGraft® 2-5150 can also be cured at accelerated rates by exposure to sauna or hot water after extrusion. APPLICATIONS AquaGraft® 2-5150 is designed for use in a variety of 125°C automotive cable applications. These two components, when blended in a 70% EPMC-2/30% FMB-5150 blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized requirements and be suitable for flame retardant 125oC applications. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct component ratios will comply with the requirements as specified in the following standards: ISO 6722 SAE J1127 FT-2 Flame Rating, UL Horizontal Flame

HALOGEN FREE, FLAME RETARDANT, (HFFR) MOISTURE CROSSLINKABLE SYSTEM FOR LOW VOLTAGE WIRE INSULATING AND CABLE JACKETING APPLICATIONS (RoHS COMPLIANT) DESCRIPTION AquaGraft® 7020 is a moisture crosslinkable, natural, XLPO composition designed to be used with CMB-6001 catalyst master batch at a ratio of 93:7. All components are supplied in pellet form and when homogeneously blended in the recommended ratios, will meet numerous low voltage insulating and cable jacketing requirements. When combined with CMB 6001 in the recommended ratio, AquaGraft® 7020 will cure with controlled exposure to moisture using a sauna or hot water after extrusion. APPLICATIONS AquaGraft® 7020 is designed for use in various applications including building wire, control cables, tray cables, photovoltaic, power and telecom cable jacketing applications, and other specifications requiring superior flame, thermal, and mechanical properties. This two-component system, when blended in the appropriate ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame and cable tests. SPECIFICATIONS When extruded and cured consistent with standard safe and acceptable wire and cable industry practices, cable insulated with AquaGraft® 7020 is designed to comply with the requirements as specified in the following standards. It is important to note that overall cable construction plays an important role in flame, fluid, and electrical performance. IEEE 383/UL-1685 IEEE 1202 - FT2 Flame Exposure ICEA S-73-532/ NYC Transit TUV 2Pfg1169:2007 EN 50618:2014

HALOGEN FREE, HIGHLY FLAME RETARDANT, (HFFR) MOISTURE CROSSLINKABLE SYSTEM FOR LOW VOLTAGE WIRE INSULATING AND CABLE JACKETING APPLICATIONS (RoHS COMPLIANT) DESCRIPTION AquaGraft® 8020 is a moisture crosslinkable, natural, XLPO composition designed to be used with CMB-6001 catalyst master batch at a ratio of 93:7. All components are supplied in pellet form and when homogeneously blended in the recommended ratios, will meet numerous low voltage insulating and cable jacketing requirements. When combined with CMB 6001 in the recommended ratio, AquaGraft® 8020 will cure with controlled exposure to moisture using a sauna or hot water after extrusion. APPLICATIONS AquaGraft® 8020 is designed for use in various applications including building wire, control cables, tray cables, photovoltaic, power and telecom cable jacketing applications, and other specifications requiring superior flame, thermal, and mechanical properties. This two-component system, when blended in the appropriate blend ratio, will yield a finished compound which will allow the cable to pass various industry recognized flame and cable tests. SPECIFICATIONS When extruded and cured consistent with standard safe and acceptable wire and cable industry practices, cable insulated with AquaGraft® 8020 is designed to comply with the requirements as specified in the following standards. It is important to note that overall cable construction plays an important role in flame, fluid, and electrical performance. IEEE 1202 - FT4 Flame Exposure IEEE 383/UL-1685 ICEA S-73-532/ NYC Transit TUV 2Pfg1169:2007 EN 50618:2014

GRAFTED XLPO BASE FOR USE IN MOISTURE CROSSLINKABLE APPLICATIONS (RoHS COMPLIANT) DESCRIPTION Natural, unfilled grafted polymer base in pellet form designed to be used in moisture crosslinkable applications for power and control cables requiring added flexibility and excellent electrical properties. AquaGraft EPMC-16 will cure with exposure to moisture at ambient temperature over a time (depending on cable construction and environmental conditions.) AquaGraft EPMC-16 can also be cured at improved rates if exposed to sauna or hot water after extrusion. APPLICATIONS AquaGraft EPMC-16 is designed for use in low to medium voltage (5kv) power cable applications. AquaGraft EPMC-16, when used in correct ratios with available Flame Retardant masterbatch will allow the cable to pass various industry recognized flame tests and perform in wet environments up to 90oC in applications SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct ratios AquaGraft EPMC-16 and FMB Masterbatch/CMB-432 will comply with the requirements as specified in the following standards: Power Cable up to 5Kv UL 44 for: XHHW, XHHW-2 RHW, RHW-2 RHH SIS USE, USE-2 Horizontal Flame VW-1 on larger cable sizes

EXTRA FLEXIBLE GRAFTED EPR BASE FOR USE IN MOISTURE CROSSLINKABLE APPLICATIONS (RoHS COMPLIANT) DESCRIPTION Natural, unfilled grafted polymer base in pellet form designed to be used in moisture crosslinkable applications for power and control cables requiring excellent flexibility and excellent electrical properties. AquaGraft EPMC-2 will cure with exposure to moisture at ambient temperature over a time (depending on cable construction and environmental conditions.) AquaGraft EPMC-2 can also be cured at improved rates if exposed to sauna or hot water after extrusion. APPLICATIONS AquaGraft EPMC-2 is designed for use in low to medium voltage (5kv) power cable applications. AquaGraft EPMC-2, when used in correct ratios with available Flame Retardant masterbatch will allow the cable to pass various industry recognized flame tests and perform in wet environments up to 90oC in applications SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct ratios AquaGraft EPMC-2 and FMB Masterbatch/CMB-432 will comply with the requirements as specified in the following standards: Power Cable up to 5Kv UL 44 for: RHW, RHW-2 RHH SIS USE, USE-2 Horizontal Flame Vertical Flame VW-1 Flammability Test

GRAFTED EPR BASE FOR USE IN MOISTURE CROSSLINKABLE APPLICATIONS (RoHS COMPLIANT) DESCRIPTION Natural, unfilled grafted polymer base in pellet form designed to be used in moisture crosslinkable applications for power and control cables requiring added flexibility and excellent electrical properties. AquaGraft EPMC-4 will cure with exposure to moisture at ambient temperature over a time (depending on cable construction and environmental conditions.) AquaGraft EPMC-4 can also be cured at improved rates if exposed to sauna or hot water after extrusion. APPLICATIONS AquaGraft EPMC-4 is designed for use in low to medium voltage (5kv) power cable applications. AquaGraft EPMC-4, when used in correct ratios with available Flame Retardant masterbatch will allow the cable to pass various industry recognized flame tests and perform in wet environments up to 90oC in applications SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct ratios AquaGraft EPMC-4 and FMB Masterbatch/CMB-432 will comply with the requirements as specified in the following standards: Power Cable up to 5Kv UL 44 for: XHHW, XHHW-2 RHW, RHW-2 RHH SIS USE, USE-2 Horizontal Flame Vertical Flame VW-1 Flammability Test

GRAFTED POLYOLEFIN BASE FOR USE IN MOISTURE CROSSLINKABLE APPLICATIONS (RoHS COMPLIANT) DESCRIPTION Unfilled grafted polymer base in pellet form designed to be used in moisture crosslinkable applications for power, control, and appliance cables requiring excellent thermal, mechanical, and electrical properties. AquaGraft PEMC-1 will cure with exposure to moisture at ambient temperature over a time (depending on cable construction and environmental conditions.) AquaGraft PEMC-1 can also be cured at improved rates if exposed to sauna or hot water after extrusion. APPLICATIONS AquaGraft PEMC-1 is designed for use in low voltage (2kv) wire and cable applications. AquaGraft PEMC-1, when used in correct ratios with available Flame Retardant masterbatch will allow the cable to pass various industry recognized flame tests and perform in wet electrical applications as well as high temperature appliance constructions. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct ratios AquaGraft PEMC-1 and FMB Masterbatch/CMB-432 will comply with the requirements as specified in the following standards: UL 44 for: XHHW, XHHW-2 SIS, USE, USE-2 UL/CSA AWM applications up to 150C Horizontal Flame* VW-1 on larger cable sizes* *(When used with appropriate level of FR master-batch)

THERMOPLASTIC NON-HALOGENATED FLAME RESISTANT POLYOLEFIN JACKETING COMPOUND (RoHS COMPLIANT)

CATALYST MASTERBATCH FOR USE WITH SILANE GRAFTED MOISTURE CROSSLINKABLE POLYMERS (RoHS COMPLIANT) DESCRIPTION Polymeric composition in pellet form designed to be used to promote crosslinking in moisture curable systems. APPLICATIONS When used in correct ratios with a grafted base polymer, this catalyst masterbatch will allow the silane grafted polymer system to crosslink when exposed to moisture and greatly improve thermal/physical/chemical performance.

CATALYST MASTERBATCH FOR USE WITH SILANE GRAFTED MOISTURE CROSSLINKABLE POLYMERS (RoHS COMPLIANT). DESCRIPTION Polymeric composition in pellet form designed to be used to promote crosslinking of moisture curable polymers. CMB-532 also contains antioxidants to provide good heat resistance to moisture cured systems. APPLICATIONS When used in correct ratios with a grafted base polymer, this catalyst masterbatch will allow the silane grafted polymer system to crosslink when exposed to moisture and greatly improve thermal/physical/chemical performance.

CATALYST MASTERBATCH FOR USE WITH SILANE GRAFTED MOISTURE CROSSLINKABLE POLYMERS (RoHS COMPLIANT) DESCRIPTION Polymeric composition in pellet form designed to be used to promote crosslinking in moisture curable systems. APPLICATIONS When blended in correct ratios with the recommended AquaGraft® base composition, this catalyst masterbatch will promote system crosslinking when exposed to moisture in a controlled manner and will greatly improve the system's thermal/physical/chemical performance.

FLAME RETARDANT CATALYST MASTERBATCH DESIGNED FOR USE IN MOISTURE CURE APPLICATIONS (ROHS COMPLIANT) DESCRIPTION Colorable polymeric composition in pellet form designed to be used in moisture crosslinkable applications requiring added flame resistance. APPLICATIONS When used in correct ratios with a grafted base polymer, this product will allow the cable to pass the various industry required flame tests and perform in wet environments up to 90oC in applications up to 600 Volts. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct ratios of EP-MC-4 and FMB-5008 / CMB-432 will comply with the requirements as specified in the following standards: UL 44 for: XHHW, XHHW-2 RHW, RHW-2 RHH SIS USE, USE-2 Horizontal Flame VW-1 on larger cable sizes

FLAME RETARDANT CATALYST MASTERBATCH DESIGNED FOR USE IN MOISTURE CURE APPLICATIONS WHERE HIGH HEAT RESISTANCE IS REQUIRED (ROHS COMPLIANT) DESCRIPTION Colorable polymeric composition in pellet form designed to be used with grafted base in moisture crosslinkable applications requiring excellent thermal stability and flame resistance. APPLICATIONS When used in correct ratios with a grafted base polymer, this product will allow the cable to pass the requirements for 150C AWM appliance and other low voltage applications. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, wire insulated with the correct ratios of grafted polymer (EPMC-16 or PEMC-1) and FMB 5150 will comply with the UL requirements for AWM style wires including Class 38 per UL 1581 for 150C XLPO

FLAME RETARDANT CATALYST MASTERBATCH DESIGNED FOR USE IN MOISTURE CURE APPLICATIONS (ROHS COMPLIANT) DESCRIPTION Colorable polymeric composition in pellet form designed to be used in moisture crosslinkable applications requiring added flame resistance. APPLICATIONS When used in correct ratios with a grafted base polymer, this product will allow the cable to pass the various industry required flame tests and perform in wet environments up to 90oC in applications up to 600 Volts. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct ratios of EPMC-(X) or PEMC and FMB-6008 / CMB-432 will comply with the requirements as specified in the following standards: UL 44 for: XHHW, XHHW-2 RHW, RHW-2 RHH SIS USE, USE-2 Horizontal Flame VW-1

FLAME RETARDANT CATALYST MASTERBATCH DESIGNED FOR USE IN MOISTURE CURE APPLICATIONS (ROHS COMPLIANT) DESCRIPTION Colorable polymeric composition in pellet form designed to be used in moisture crosslinkable applications requiring added flame resistance. PPLICATIONS When used in correct ratios with a grafted base polymer, this product will meet various low voltage and specialty wire and cable requirements. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cable insulated with the correct ratios of EPMC-16 or PEMC-1 and FMB-6010 will comply with the requirements as specified in the following standards: UL 44 for: RHW, RHW-2 RHH SIS CSA 22.2 No. 38 for: RW-75, RWU-75, R-90, RW-90 UL Horizontal Flame FT-2 Flame

LOW VOLTAGE, NO-LEAD, VW-1 FLAME RETARDANT IRRADIATION CROSSLINKABLE ELECTRICAL INSULATION COMPOUND (ROHS COMPLIANT) DESCRIPTION Colorable flame retardant polymeric composition in pellet form, designed for irradiation crosslinking, ready for extrusion on conventional extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, crush, deformation resistance, and superior electrical performance. APPLICATIONS Cable insulated with EXCELENE 4980 is suitable for many low voltage (up to 2kV) applications, such as building wire, control cable, switchboard, marine shipboard, and oil/gas platform wire and requiring superior mechanical/electrical properties. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cables insulated with EXCELENE 4980 insulation are designed to meet or exceed the requirements as specified in the following standards. IEEE-1580 Type P UL 44 XHHW-2 UL 1309 CSA 22.2 No. 245 UL VW-1

LOW VOLTAGE, NO-LEAD, VW-1 FLAME RETARDANT CROSSLINKABLE EPR ELECTRICAL INSULATION COMPOUND (ROHS COMPLIANT) DESCRIPTION Colorable flame retardant polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, crush, deformation resistance at high temperatures, and superior flexibility. APPLICATIONS Cable insulated with SUPEROHM® 4863 is suitable for many low voltage applications, such as building wire, control cable, switchboard wire and submersible pump cable requireing superior mechanical properties and UV stability. SPECIFICATIONS When extruded and cured consistent with standard safe wire and cable industry practices, cables insulated with SUPEROHM® 4863 insulation will meet or exceed the requirements as specified in the following standards including RHH, RHW, USE, SIS, and C.T. rated cables: VW-1 Flammability Test UL 44 for XHHW, XHHW-2, XHH, RHH, RHW, RHW-2, SIS, USE, and USE-2. IEC 60332