Hifax 7430 XEP is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell' s proprietary Catalloy process technology. It is a high melt flow, medium-high flexural modulus, highly crystalline copolymer with good balance of impact and stiffness. It is primarily used in interior trim applications requiring low temperature high speed impact performance. It is also used as a component in compounded materials for automotive and industrial applications. The grade is available in natural pellet form.

Hifax 7639 XCS is a porous polypropylene random copolymer product manufactured using the LyondellBasell`s proprietary Catalloy process technology. It is tailored for production of liquid dosed concentrates e.g. peroxide master batches. The grade is available in natural spherical form.

Hifax CA 10 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell proprietary Catalloy process technology. It is suitable for industrial applications where a combination of good processability and excellent softness is required. It is widely used as building block resin for flexible water-proofing membranes. Hifax CA 10 A exhibits low stiffness, low hardness and good impact resistance. The grade is available in natural pellet form.

Hifax CA 12 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell' s proprietary Catalloy process technology. It is suitable for industrial applications where a combination of good processability and excellent softness is required. Hifax CA 12 A exhibits low stiffness, low hardness and good impact resistance. The material shows high compatibility to other polyolefins as well as to other soft plastics. Hifax CA 12 A is cross linkable. The grade is available in natural pellet form.

Hifax CA 138 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. This grade is suitable for use in compounds as impact modifier, to give excellent processability whilst maintaining optimum mechanical properties. The grade is available in natural pellet form.

Hifax CA 207 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is suitable for injection molding applications as well as for wire & cable extrusion process. As an impact modifier for compounding applications, it can be blended with other polyolefinic resins for a better shrinkage control and to improve the low temperature impact resistance. It does not contain any slip nor anti-blocking agents. The grade is available in natural pellet form.

Hifax CA 212 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell' s proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. The grade is available in natural pellet form.

Hifax CA 387 A is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell's proprietary Catalloy process technology. It has high melt flow and an excellent balance of impact, stiffness, processability and paintability. Hifax CA 387 A is primarily used for painted automotive bumper fascias that require high durability, and for other injection molded parts with paintable and weatherable requirements. It is also utilized as a component in compounded materials for a wide range of industrial applications. The grade is available in natural pellet form.

Hifax CA 5010 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell`s proprietary Catalloy process technology. This grade is primarily used in polyolefin-based compounds to improve mechanical properties and enhance molded part appearance. Due to its high melt strength and unique polymer composition this product is selected by our customers for foaming applications. This grade is available in natural pellet form.

Hifax CA5075A is an advanced polyolefin selected by our customers for use in various expanded Polypropylene (EPP) foaming applications. This grade features a low melting temperature, a low seal initiation temperature and good optics.

Hifax CA 60 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell' s proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. Due to the high fluidity Hifax CA 60 A shows high compatibility to fillers and to flame retardant additives as well as to other polyolefins. The grade is available in natural pellet form.

Hifax CA 7153 S is a porous polypropylene random copolymer product manufactured using the LyondellBasell`s proprietary Catalloy process technology. It is tailored for production of liquid dosed concentrates e.g. peroxide master batches. The grade is available in natural spherical form.

Hifax CA 7201 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is primarily used for bumper and interior/exterior trim applications in Automotive. It has a very high impact performance, reduced shrinkage and a very good paintability. The material also has a high level of processability. The grade is available in natural pellet form.

Hifax CA 721 GW is a flexible polypropylene resin used by our customers for waterproofing applications. It is manufactured using the LyondellBasell' s proprietary Catalloy process technology. Hifax CA 721 GW membranes can be produced on slot die extruders, circular die (Blown film) extruders and on most of the calendering units. Hifax CA 721 GW is available in natural pellet form, and is UV light stabilised. Our customers use Hifax CA 721 GW to produce flexible membrane, fish pond liner, snow lagoon membrane, tunnel lining, water reservoir liner, floating cover, soil and waste sheet and flexible profiles. Hifax CA 721 GW is not intended for medical and pharmaceutical applications. Hifax CA 721 GW cannot be used in geomembranes application without prior approval from the seller.

Hifax CA 7271 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is designed for injection molding controlled shrinkage applications (e.g. bumpers). Hifax CA 7271 A exhibits high melt flow rate with good impact/stiffness balance and reduced shrinkage. The grade is available in natural pellet form.

Hifax CA 7320 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is designed for use in compounds where it shows high efficiency as impact modifier. It gives excellent processability whilst maintaining optimum mechanical properties. The grade is available in natural pellet form.

Hifax CA 7378 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is suitable for injection molding controlled shrinkage applications (e.g. automotive exterior or interior). Hifax CA 7378 A exhibits high melt flow rate with good impact/stiffness balance and reduced shrinkage. The grade is available in natural pellet form.

Hifax CA 7441 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is suitable for extrusion processes. It exhibits low stiffness, low hardness, combined with a high melting point and low fluidity. The grade is available in natural pellet form.

Hifax CA 7442 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is primarily used for exterior and interior trims applications as base building block for technical compounds, in Automotive. It is suitable also for bumpers. It has a high impact performance and reduced shrinkage. The material also exhibits a good processability. The grade is available in natural pellet form.

Hifax CA 7910 A is a TPO (thermoplastic polyolefin) designed for use in MV power cable insulations. It exhibits low stiffness, low hardness, combined with a high melting point and low fluidity. Hifax CA 7910 A contains a robust additives package for thermal stabilization and is available in natural pellet form. Cable insulations manufactured with Hifax CA 7910 A and sound extrusion practice usually comply with the following cable standards: HD 620 S3: DIP1, DIP2, DIP3

Hifax CA60A NA 598F ANTHRACITE is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell' s proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. Due to the high fluidity, Hifax CA60A NA 598F ANTHRACITE shows high compatibility to fillers and to flame retardant additives as well as to other polyolefins.

Hifax CA60A NA 848 BLACK is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell' s proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. Due to the high fluidity, Hifax CA60A NA 848 BLACK shows high compatibility to fillers and to flame retardant additives as well as to other polyolefins.

Hifax X 1956 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell`s proprietary Catalloy process technology. This grade is primarily used in polyolefin-based compounds to improve mechanical properties and enhance moulded part appearance. In particular, the product is used by our customers for providing tiger stripe resistance and improved aesthetics for unpainted automotive components. The grade is available in natural pellet form.