Poliamida (nylon): InStruc®
| Producto | Disponibilidad | Descripción del producto |
|---|---|---|
| InStruc® PA6GF33 | África y Oriente Medio |
33% GLASS FIBER REINFORCED HEAT STABILIZED NYLON 6
|
| InStruc® PA6GF33HSMD | África y Oriente Medio |
33% GLASS FIBER REINFORCED, HEAT STABILIZED NYLON 6 (LOCKED MEDICAL FORMULATION)
|
| InStruc® PA6GF33IMHS | África y Oriente Medio |
33% GLASS FIBER REINFORCED, IMPACT MODIFIED NYLON 6. THIS PRODUCT IS ALSO HEAT STABILIZED
|
| InStruc® PA6GF35 | África y Oriente Medio |
35% GLASS FIBER REINFORCED NYLON 6
|
| InStruc® PA6GF35HSMD | África y Oriente Medio |
InStruc PA6GF35HSMD is a 35% glass fiber reinforced, heat stabilized nylon 6. InStruc PA6GF35HSMD offers great stiffness, chemical resistance, strength, and surface finish. This is a locked medical formulation.
|
| InStruc® PA6GF40 | África y Oriente Medio |
40% GLASS FIBER REINFORCED NYLON 6
|
| InStruc® PA6GF50 | África y Oriente Medio |
50% GLASS FIBER REINFORCED NYLON 6
|
| InStruc® PA6GF50HSUV | África y Oriente Medio |
50% GLASS FIBER REINFORCED HEAT AND UV STABILIZED NYLON 6
|
| InStruc® PA6GF60HS | África y Oriente Medio |
60% GLASS FIBER REINFORCED HEAT STABILIZED NYLON 6
|
| InStruc® PA6GF63HS | África y Oriente Medio |
63% GLASS FIBER REINFORCED HEAT STABILIZED NYLON 6
|
| InStruc® PA6I6TGF30 | África y Oriente Medio |
30% glass fiber reinforced injection molding grade of amorphous partially aromatic nylon 6I/6T with high strength and toughness.
|
| InStruc® PA6IMLT | África y Oriente Medio |
LOW TEMPERATURE, IMPACT MODIFIED NYLON 6
|
| InStruc® PPACF15GF10HS | África y Oriente Medio |
15% CARBON FIBER AND 10% GLASS FIBER REINFORCED, HEAT STABILIZED, POLYPHTHALAMIDE.
|
| InStruc® PPACF30MD | África y Oriente Medio |
30% CARBON FIBER REINFORCED POLYPHTHALAMIDE
(MEDICALLY LOCKED FORMULATION)
|
| InStruc® PPAGF10HWMD | África y Oriente Medio |
10% GLASS FIBER REINFORCED, HOT WATER MOLDABLE, POLYPHTHALAMIDE
( LOCKED MEDICAL FORMULATION )
|
| InStruc® PPAGF20 | África y Oriente Medio |
20% GLASS FIBER REINFORCED PPA
|
| InStruc® PPAGF20HWMD | África y Oriente Medio |
20% GLASS FIBER REINFORCED, HOT WATER MOLDABLE, POLYPHTHALAMIDE
( LOCKED MEDICAL FORMULATION )
|
| InStruc® PPAGF30HW | África y Oriente Medio |
30% GLASS FIBER REINFORCED, HOT WATER MOLDABLE POLYPHTHALAMIDE.
|
| InStruc® PPAGF30HWIM2 | África y Oriente Medio |
30% GLASS FIBER REINFORCED, HOT WATER MOLDABLE, MODERATELY IMPACT MODIFIED POLYPHTHALAMIDE
|
| InStruc® PPAGF30HWIM2HS | África y Oriente Medio |
30% GLASS FIBER REINFORCED, HOT WATER MOLDABLE, MODERATELY IMPACT MODIFIED HEAT STABILIZED POLYPHTHALAMIDE
|
| InStruc® PPAGF30IM2 | África y Oriente Medio |
30% GLASS FIBER REINFORCED, MODERATELY IMPACT MODIFIED POLYPHTHALAMIDE
|
| InStruc® PPAGF30IM2HS | África y Oriente Medio |
30% GLASS FIBER REINFORCED, MODERATELY IMPACT MODIFIED HEAT STABILIZED POLYPHTHALAMIDE
|
| InStruc® PPAGF33HS | África y Oriente Medio |
33% GLASS FIBER REINFORCED, HEAT STABILIZED, POLYPHTHALAMIDE (PPA)
|
| InStruc® PPAGF35HSHW | África y Oriente Medio |
InStruc PPAGF35HSHW is a 35% glass filled, heat stabilized, hot water moldable polyphthalamide (PPA). InStruc PPAGF35HSHW offers great heat resistance, chemical resistance, low moisture absorption, and a good mix of physical and mechanical properties.
|
| InStruc® PPAGF40 | África y Oriente Medio |
40% GLASS FIBER REINFORCED POLYPHTHALAMIDE
|
| InStruc® PPAGF40HW | África y Oriente Medio |
40% GLASS FIBER REINFORCED, HOT WATER MOLDABLE POLYPHTHALAMIDE.
|
| InStruc® PPAGF50HW | África y Oriente Medio |
50% GLASS FIBER REINFORCED, HOT WATER MOLDABLE POLYPHTHALAMIDE.
|
| InStruc® PPAGF5HWMD | África y Oriente Medio |
5% GLASS FIBER REINFORCED, HOT WATER MOLDABLE, POLYPHTHALAMIDE
( LOCKED MEDICAL FORMULATION )
|
| InStruc® PPAIM | África y Oriente Medio |
IMPACT MODIFIED POLYPHTHALAMIDE
|
| InStruc® PPEPAGF20 | África y Oriente Medio |
20% GLASS FIBER REINFORCED PPE + PA
|
