Features - A210ST is a super tough and high performance polyamide 66. Application - Automotive(Covers) Drying - Product is dried and packed with a moisture content of <0.16%. Should the packing become damaged or be left open too long, then the material must be dried. A too high moisture content can lead to a reduction of optical and mechanical properties.

Features - H12T is a unreinforced PA6/ABS alloy product with high impact. Application - Automotive construction, sports and recreation, electrical/electronics Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - H24WC is unreinforced PA66/ABS alloy product with high toughness, high strengh. Application - Automotive wheel cover Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - HG10L is a GF 10% reinforced PA6/ABS alloy with high impact product. Application - Automotive parts. Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - HG20L is a GF 20% reinforced PA6/ABS alloy with high impact product. Application - Automotive parts. Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - H14ST is a unreinforced PA6/ABS alloy product with super toughness. Application - Automotive construction, sports and recreation, electrical/electronics Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - JN1 is unreinforced PA/PPE alloy. JN1 has good properties with excellent heat resistance, excellent dimensional stability, good impact resistence, good chemical resistance Application - Junction box Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210F is a unreinforced polyamide 66 for fast crystallinity. Application - Buckles, Chair Nob Drying - Product is dried and packed with a moisture content of <0.16%. Should the packing become damaged or be left open too long, then the material must be dried. A too high moisture content can lead to a reduction of optical and mechanical properties.

Features - TA210G15 is GF 15% reinforced Polyamide66. TA210G15 has good mechanical properties. Application - Automotive Parts Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210G20 is GF25% reinforced Polyamide66. Application - Automotive Parts Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210G30 is GF 30% reinforced Polyamide66. TA210G30 has good mechanical properties. Application - Automotive Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210G33 is GF 33% reinforced Polyamide66. TA210G33 has good mechanical properties. Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210G35 is GF 35% reinforced Polyamide66. TA210G35 has good mechanical properties. Application - Automotive Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210G45 is GF 45% reinforced Polyamide66. TA210G45 has good mechanical properties. Application - Motor guide vane, Reel body Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210GM is GF/MF 30% reinforced PA66. TA210GM has good properties with good mechanical properties. Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210GR is GF 30% reinforced Polyamide66. TA210GR has good properties with good mechanical properties and anti hydrolysis. Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210HI is PA66 unreinforced impact modified product. Application - Automotive(Covers) Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210HI3 is PA66 unreinforced impact modified product. Application - Automotive(Covers) Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210HS is a heat stabilized, lubricated unreinforced polyamide 66 for injection molding. Application - Buckles, Chair Nob Drying - Product is dried and packed with a moisture content of <0.16%. Should the packing become damaged or be left open too long, then the material must be dried. A too high moisture content can lead to a reduction of optical and mechanical properties.

Features - TA210IR is PA66 unreinforced impact modified product Application - Automotive(Covers) Drying - Product is dried and packed with a moisture content of <0.16%. Should the packing become damaged or be left open too long, then the material must be dried. A too high moisture content can lead to a reduction of optical and mechanical properties.

Features - TA210K40 is a mineral filler 40% reinforced polyamide 66. Application - Plumbing cap Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210L is a unreinforced polyamide 66 with releasing agent. Application - Buckle, Cable tie, Connector Drying - Product is dried and packed with a moisture content of <0.16%. Should the packing become damaged or be left open too long, then the material must be dried. A too high moisture content can lead to a reduction of optical and mechanical properties.

Features - TA210LW is a unreinforced polyamide 66 product for low wear friction. Application - Chair parts. Drying - Product is dried and packed with a moisture content of <0.16%. Should the packing become damaged or be left open too long, then the material must be dried. A too high moisture content can lead to a reduction of optical and mechanical properties.

Features - TA210M40 is MF40% reinforced polyamide 66. Application - Automotive(Engine Cover) Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210SG15 is GF 15% reinforced Polyamide66. TA210SG15 has good properties with impact resistance. Application - Automotive(Covers) Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties..

Features - TA210SG30 is GF 30% reinforced PA66. TA210SG30 has good properties with outstanding impact resistance. Application - Housing, Fitting Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA210ST is a super tough and high performance polyamide 66. Application - Automotive(Covers) Drying - Product is dried and packed with a moisture content of <0.16%. Should the packing become damaged or be left open too long, then the material must be dried. A too high moisture content can lead to a reduction of optical and mechanical properties.

Features - TA211G25H is GF 25% reinforced Polyamide66. TA211G25H has good mechanical properties. Application - Automotive Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA217HS is a heat stabilized, lubricated unreinforced polyamide 66 for injection molding. Application - Buckles, Chair Nob Drying - Product is dried and packed with a moisture content of <0.16%. Should the packing become damaged or be left open too long, then the material must be dried. A too high moisture content can lead to a reduction of optical and mechanical properties.

Features - TA220GM is GF/MF 40% reinforced Polyamide66. Application - Automotive(Engine Cover) Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA250FR is unreinforced flame retardant polyamide66. TA250FR has good properties with flammability UL94 V-0 and good processability. Application - Junction block, Terminal block, Connector. Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA250G60 is GF 60% reinforced Polyamide66/6. TA250G60 has good mechanical properties. Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA250GFR is GF 25% reinforced flame retardant Polyamide66. TA250GFR has good properties with flammability UL94 V_0 and good processability. Application - IT/OA(Connector) Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA250GM is GF/MF 40% reinforced PA66. TA250GM has good properties with good mechanical properties. Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA260GM is GF/MF 38% reinforced PA66. TA260GM has good properties with good mechanical properties. Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA270GM is GF/MF 38% reinforced Polyamide66. Application - Automotive(Side Mirror Base Plate) Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TA631 is GF/CF 30% reinforced Polyamide66. TA631 has good properties with 10^4 ohm surface electric resistivity. Application - Fuel filter housing Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TB110HI is a unreinforced polyamide 6 . TB110HI has high impact properties. Application - Electric/Electronic Parts Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TB110M25 is MF 25% reinforced Polyamide6. TB110M25 has good mechanical properties and dimension stability. Application - E&E(Rice Cooker Housing) Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.

Features - TB110M40 is MF40% reinforced polyamide 6 . Application - E&E(Rice Cooker Housing) Drying - Product is dried and packed with a moisture content of <0.16%. Should the Packaging become damaged or be left open too long, then the material must be Dried. A too high moisture content can lead to a reduction of optical and Mechanical properties.